| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1535664761-86018-10-git-send-email-eajames@linux.vnet.ibm.com>
Date: Thu, 30 Aug 2018 16:32:40 -0500
From: Eddie James <eajames@...ux.vnet.ibm.com>
To: linux-kernel@...r.kernel.org
Cc: linux-hwmon@...r.kernel.org, devicetree@...r.kernel.org,
jdelvare@...e.com, linux-doc@...r.kernel.org,
openbmc@...ts.ozlabs.org, robh+dt@...nel.org,
gregkh@...uxfoundation.org, mark.rutland@....com,
linux@...ck-us.net, joel@....id.au, benh@...nel.crashing.org,
Eddie James <eajames@...ux.vnet.ibm.com>
Subject: [PATCH v5 09/10] hwmon (occ): Add sensor attributes and register hwmon device
Setup the sensor attributes for every OCC sensor found by the first poll
response. Register the attributes with hwmon.
Signed-off-by: Eddie James <eajames@...ux.vnet.ibm.com>
---
drivers/hwmon/occ/common.c | 337 +++++++++++++++++++++++++++++++++++++++++++++
drivers/hwmon/occ/common.h | 16 +++
2 files changed, 353 insertions(+)
diff --git a/drivers/hwmon/occ/common.c b/drivers/hwmon/occ/common.c
index f7220132..c6c8161 100644
--- a/drivers/hwmon/occ/common.c
+++ b/drivers/hwmon/occ/common.c
@@ -1,11 +1,13 @@
// SPDX-License-Identifier: GPL-2.0
#include <linux/device.h>
+#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/math64.h>
#include <linux/mutex.h>
+#include <linux/sysfs.h>
#include <asm/unaligned.h>
#include "common.h"
@@ -641,6 +643,324 @@ static ssize_t occ_show_extended(struct device *dev,
return rc;
}
+/*
+ * Some helper macros to make it easier to define an occ_attribute. Since these
+ * are dynamically allocated, we shouldn't use the existing kernel macros which
+ * stringify the name argument.
+ */
+#define ATTR_OCC(_name, _mode, _show, _store) { \
+ .attr = { \
+ .name = _name, \
+ .mode = VERIFY_OCTAL_PERMISSIONS(_mode), \
+ }, \
+ .show = _show, \
+ .store = _store, \
+}
+
+#define SENSOR_ATTR_OCC(_name, _mode, _show, _store, _nr, _index) { \
+ .dev_attr = ATTR_OCC(_name, _mode, _show, _store), \
+ .index = _index, \
+ .nr = _nr, \
+}
+
+#define OCC_INIT_ATTR(_name, _mode, _show, _store, _nr, _index) \
+ ((struct sensor_device_attribute_2) \
+ SENSOR_ATTR_OCC(_name, _mode, _show, _store, _nr, _index))
+
+/*
+ * Allocate and instatiate sensor_device_attribute_2s. It's most efficient to
+ * use our own instead of the built-in hwmon attribute types.
+ */
+static int occ_setup_sensor_attrs(struct occ *occ)
+{
+ unsigned int i, s, num_attrs = 0;
+ struct device *dev = occ->bus_dev;
+ struct occ_sensors *sensors = &occ->sensors;
+ struct occ_attribute *attr;
+ struct temp_sensor_2 *temp;
+ ssize_t (*show_temp)(struct device *, struct device_attribute *,
+ char *) = occ_show_temp_1;
+ ssize_t (*show_freq)(struct device *, struct device_attribute *,
+ char *) = occ_show_freq_1;
+ ssize_t (*show_power)(struct device *, struct device_attribute *,
+ char *) = occ_show_power_1;
+ ssize_t (*show_caps)(struct device *, struct device_attribute *,
+ char *) = occ_show_caps_1_2;
+
+ switch (sensors->temp.version) {
+ case 1:
+ num_attrs += (sensors->temp.num_sensors * 2);
+ break;
+ case 2:
+ num_attrs += (sensors->temp.num_sensors * 4);
+ show_temp = occ_show_temp_2;
+ break;
+ default:
+ sensors->temp.num_sensors = 0;
+ }
+
+ switch (sensors->freq.version) {
+ case 2:
+ show_freq = occ_show_freq_2;
+ /* fall through */
+ case 1:
+ num_attrs += (sensors->freq.num_sensors * 2);
+ break;
+ default:
+ sensors->freq.num_sensors = 0;
+ }
+
+ switch (sensors->power.version) {
+ case 2:
+ show_power = occ_show_power_2;
+ /* fall through */
+ case 1:
+ num_attrs += (sensors->power.num_sensors * 4);
+ break;
+ case 0xA0:
+ num_attrs += (sensors->power.num_sensors * 16);
+ show_power = occ_show_power_a0;
+ break;
+ default:
+ sensors->power.num_sensors = 0;
+ }
+
+ switch (sensors->caps.version) {
+ case 1:
+ num_attrs += (sensors->caps.num_sensors * 7);
+ break;
+ case 3:
+ show_caps = occ_show_caps_3;
+ /* fall through */
+ case 2:
+ num_attrs += (sensors->caps.num_sensors * 8);
+ break;
+ default:
+ sensors->caps.num_sensors = 0;
+ }
+
+ switch (sensors->extended.version) {
+ case 1:
+ num_attrs += (sensors->extended.num_sensors * 3);
+ break;
+ default:
+ sensors->extended.num_sensors = 0;
+ }
+
+ occ->attrs = devm_kzalloc(dev, sizeof(*occ->attrs) * num_attrs,
+ GFP_KERNEL);
+ if (!occ->attrs)
+ return -ENOMEM;
+
+ /* null-terminated list */
+ occ->group.attrs = devm_kzalloc(dev, sizeof(*occ->group.attrs) *
+ num_attrs + 1, GFP_KERNEL);
+ if (!occ->group.attrs)
+ return -ENOMEM;
+
+ attr = occ->attrs;
+
+ for (i = 0; i < sensors->temp.num_sensors; ++i) {
+ s = i + 1;
+ temp = ((struct temp_sensor_2 *)sensors->temp.data) + i;
+
+ snprintf(attr->name, sizeof(attr->name), "temp%d_label", s);
+ attr->sensor = OCC_INIT_ATTR(attr->name, 0444, show_temp, NULL,
+ 0, i);
+ attr++;
+
+ if (sensors->temp.version > 1 &&
+ temp->fru_type == OCC_FRU_TYPE_VRM) {
+ snprintf(attr->name, sizeof(attr->name),
+ "temp%d_alarm", s);
+ } else {
+ snprintf(attr->name, sizeof(attr->name),
+ "temp%d_input", s);
+ }
+
+ attr->sensor = OCC_INIT_ATTR(attr->name, 0444, show_temp, NULL,
+ 1, i);
+ attr++;
+
+ if (sensors->temp.version > 1) {
+ snprintf(attr->name, sizeof(attr->name),
+ "temp%d_fru_type", s);
+ attr->sensor = OCC_INIT_ATTR(attr->name, 0444,
+ show_temp, NULL, 2, i);
+ attr++;
+
+ snprintf(attr->name, sizeof(attr->name),
+ "temp%d_fault", s);
+ attr->sensor = OCC_INIT_ATTR(attr->name, 0444,
+ show_temp, NULL, 3, i);
+ attr++;
+ }
+ }
+
+ for (i = 0; i < sensors->freq.num_sensors; ++i) {
+ s = i + 1;
+
+ snprintf(attr->name, sizeof(attr->name), "freq%d_label", s);
+ attr->sensor = OCC_INIT_ATTR(attr->name, 0444, show_freq, NULL,
+ 0, i);
+ attr++;
+
+ snprintf(attr->name, sizeof(attr->name), "freq%d_input", s);
+ attr->sensor = OCC_INIT_ATTR(attr->name, 0444, show_freq, NULL,
+ 1, i);
+ attr++;
+ }
+
+ if (sensors->power.version == 0xA0) {
+ /*
+ * Special case for many-attribute power sensor. Split it into
+ * a sensor number per power type, emulating several sensors.
+ */
+ for (i = 0; i < sensors->power.num_sensors; ++i) {
+ unsigned int j;
+ unsigned int nr = 0;
+
+ s = (i * 4) + 1;
+
+ for (j = 0; j < 4; ++j) {
+ snprintf(attr->name, sizeof(attr->name),
+ "power%d_label", s);
+ attr->sensor = OCC_INIT_ATTR(attr->name, 0444,
+ show_power, NULL,
+ nr++, i);
+ attr++;
+
+ snprintf(attr->name, sizeof(attr->name),
+ "power%d_average", s);
+ attr->sensor = OCC_INIT_ATTR(attr->name, 0444,
+ show_power, NULL,
+ nr++, i);
+ attr++;
+
+ snprintf(attr->name, sizeof(attr->name),
+ "power%d_average_interval", s);
+ attr->sensor = OCC_INIT_ATTR(attr->name, 0444,
+ show_power, NULL,
+ nr++, i);
+ attr++;
+
+ snprintf(attr->name, sizeof(attr->name),
+ "power%d_input", s);
+ attr->sensor = OCC_INIT_ATTR(attr->name, 0444,
+ show_power, NULL,
+ nr++, i);
+ attr++;
+
+ s++;
+ }
+ }
+ } else {
+ for (i = 0; i < sensors->power.num_sensors; ++i) {
+ s = i + 1;
+
+ snprintf(attr->name, sizeof(attr->name),
+ "power%d_label", s);
+ attr->sensor = OCC_INIT_ATTR(attr->name, 0444,
+ show_power, NULL, 0, i);
+ attr++;
+
+ snprintf(attr->name, sizeof(attr->name),
+ "power%d_average", s);
+ attr->sensor = OCC_INIT_ATTR(attr->name, 0444,
+ show_power, NULL, 1, i);
+ attr++;
+
+ snprintf(attr->name, sizeof(attr->name),
+ "power%d_average_interval", s);
+ attr->sensor = OCC_INIT_ATTR(attr->name, 0444,
+ show_power, NULL, 2, i);
+ attr++;
+
+ snprintf(attr->name, sizeof(attr->name),
+ "power%d_input", s);
+ attr->sensor = OCC_INIT_ATTR(attr->name, 0444,
+ show_power, NULL, 3, i);
+ attr++;
+ }
+ }
+
+ if (sensors->caps.num_sensors >= 1) {
+ s = sensors->power.num_sensors + 1;
+
+ snprintf(attr->name, sizeof(attr->name), "power%d_label", s);
+ attr->sensor = OCC_INIT_ATTR(attr->name, 0444, show_caps, NULL,
+ 0, 0);
+ attr++;
+
+ snprintf(attr->name, sizeof(attr->name), "power%d_cap", s);
+ attr->sensor = OCC_INIT_ATTR(attr->name, 0444, show_caps, NULL,
+ 1, 0);
+ attr++;
+
+ snprintf(attr->name, sizeof(attr->name), "power%d_input", s);
+ attr->sensor = OCC_INIT_ATTR(attr->name, 0444, show_caps, NULL,
+ 2, 0);
+ attr++;
+
+ snprintf(attr->name, sizeof(attr->name),
+ "power%d_cap_not_redundant", s);
+ attr->sensor = OCC_INIT_ATTR(attr->name, 0444, show_caps, NULL,
+ 3, 0);
+ attr++;
+
+ snprintf(attr->name, sizeof(attr->name), "power%d_cap_max", s);
+ attr->sensor = OCC_INIT_ATTR(attr->name, 0444, show_caps, NULL,
+ 4, 0);
+ attr++;
+
+ snprintf(attr->name, sizeof(attr->name), "power%d_cap_min", s);
+ attr->sensor = OCC_INIT_ATTR(attr->name, 0444, show_caps, NULL,
+ 5, 0);
+ attr++;
+
+ snprintf(attr->name, sizeof(attr->name), "power%d_cap_user",
+ s);
+ attr->sensor = OCC_INIT_ATTR(attr->name, 0644, show_caps,
+ occ_store_caps_user, 6, 0);
+ attr++;
+
+ if (sensors->caps.version > 1) {
+ snprintf(attr->name, sizeof(attr->name),
+ "power%d_cap_user_source", s);
+ attr->sensor = OCC_INIT_ATTR(attr->name, 0444,
+ show_caps, NULL, 7, 0);
+ attr++;
+ }
+ }
+
+ for (i = 0; i < sensors->extended.num_sensors; ++i) {
+ s = i + 1;
+
+ snprintf(attr->name, sizeof(attr->name), "extn%d_label", s);
+ attr->sensor = OCC_INIT_ATTR(attr->name, 0444,
+ occ_show_extended, NULL, 0, i);
+ attr++;
+
+ snprintf(attr->name, sizeof(attr->name), "extn%d_flags", s);
+ attr->sensor = OCC_INIT_ATTR(attr->name, 0444,
+ occ_show_extended, NULL, 1, i);
+ attr++;
+
+ snprintf(attr->name, sizeof(attr->name), "extn%d_input", s);
+ attr->sensor = OCC_INIT_ATTR(attr->name, 0444,
+ occ_show_extended, NULL, 2, i);
+ attr++;
+ }
+
+ /* put the sensors in the group */
+ for (i = 0; i < num_attrs; ++i) {
+ sysfs_attr_init(&occ->attrs[i].sensor.dev_attr.attr);
+ occ->group.attrs[i] = &occ->attrs[i].sensor.dev_attr.attr;
+ }
+
+ return 0;
+}
+
/* only need to do this once at startup, as OCC won't change sensors on us */
static void occ_parse_poll_response(struct occ *occ)
{
@@ -704,6 +1024,7 @@ int occ_setup(struct occ *occ, const char *name)
int rc;
mutex_init(&occ->lock);
+ occ->groups[0] = &occ->group;
/* no need to lock */
rc = occ_poll(occ);
@@ -718,5 +1039,21 @@ int occ_setup(struct occ *occ, const char *name)
occ_parse_poll_response(occ);
+ rc = occ_setup_sensor_attrs(occ);
+ if (rc) {
+ dev_err(occ->bus_dev, "failed to setup sensor attrs: %d\n",
+ rc);
+ return rc;
+ }
+
+ occ->hwmon = devm_hwmon_device_register_with_groups(occ->bus_dev, name,
+ occ, occ->groups);
+ if (IS_ERR(occ->hwmon)) {
+ rc = PTR_ERR(occ->hwmon);
+ dev_err(occ->bus_dev, "failed to register hwmon device: %d\n",
+ rc);
+ return rc;
+ }
+
return 0;
}
diff --git a/drivers/hwmon/occ/common.h b/drivers/hwmon/occ/common.h
index e074251..00ac101 100644
--- a/drivers/hwmon/occ/common.h
+++ b/drivers/hwmon/occ/common.h
@@ -3,7 +3,9 @@
#ifndef OCC_COMMON_H
#define OCC_COMMON_H
+#include <linux/hwmon-sysfs.h>
#include <linux/mutex.h>
+#include <linux/sysfs.h>
struct device;
@@ -76,6 +78,15 @@ struct occ_sensors {
struct occ_sensor extended;
};
+/*
+ * Use our own attribute struct so we can dynamically allocate space for the
+ * name.
+ */
+struct occ_attribute {
+ char name[32];
+ struct sensor_device_attribute_2 sensor;
+};
+
struct occ {
struct device *bus_dev;
@@ -88,6 +99,11 @@ struct occ {
unsigned long last_update;
struct mutex lock; /* lock OCC access */
+
+ struct device *hwmon;
+ struct occ_attribute *attrs;
+ struct attribute_group group;
+ const struct attribute_group *groups[2];
};
int occ_setup(struct occ *occ, const char *name);
--
1.8.3.1
Powered by blists - more mailing lists