linux-kernel - [PATCH 1/2] usb: gadget: fsl_udc_core: check allocation return value and cleanup on failure

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1535624219-17854-1-git-send-email-hofrat@osadl.org>
Date:   Thu, 30 Aug 2018 12:16:58 +0200
From:   Nicholas Mc Guire <hofrat@...dl.org>
To:     Li Yang <leoyang.li@....com>
Cc:     Felipe Balbi <balbi@...nel.org>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        linux-usb@...r.kernel.org, linuxppc-dev@...ts.ozlabs.org,
        linux-kernel@...r.kernel.org, Nicholas Mc Guire <hofrat@...dl.org>
Subject: [PATCH 1/2] usb: gadget: fsl_udc_core: check allocation return value and cleanup on failure

The allocation with fsl_alloc_request() and kmalloc() were unchecked
fixed this up with a NULL check and appropriate cleanup.

Additionally udc->ep_qh_size was reset to 0 on failure of allocation.
Similar udc->phy_mode is initially 0 (as udc_controller was
allocated with kzalloc in fsl_udc_probe()) so reset it to 0 as well
so that this function is side-effect free on failure. Not clear if
this is necessary or sensible as fsl_udc_release() probably can not
be called if fsl_udc_probe() failed - but it should not hurt.

Signed-off-by: Nicholas Mc Guire <hofrat@...dl.org>
Fixes: b504882da5 ("USB: add Freescale high-speed USB SOC device controller driver")
---

Problem located with experimental coccinelle script

Patch was compile tested with: imx_v6_v7_defconfig (implies USB_FSL_USB2=y)
(with a large number of sparse warnings not related to the proposed change
 and one smatch warning)

Patch is against 4.19-rc1 (localversion-next is next-20180830)

 drivers/usb/gadget/udc/fsl_udc_core.c | 30 ++++++++++++++++++++++++++----
 1 file changed, 26 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c
index be59309..e637afb 100644
--- a/drivers/usb/gadget/udc/fsl_udc_core.c
+++ b/drivers/usb/gadget/udc/fsl_udc_core.c
@@ -2247,8 +2247,10 @@ static int struct_udc_setup(struct fsl_udc *udc,
 	udc->phy_mode = pdata->phy_mode;
 
 	udc->eps = kcalloc(udc->max_ep, sizeof(struct fsl_ep), GFP_KERNEL);
-	if (!udc->eps)
-		return -1;
+	if (!udc->eps) {
+		ERR("kmalloc udc endpoint status failed\n");
+		goto eps_alloc_failed;
+	}
 
 	/* initialized QHs, take care of alignment */
 	size = udc->max_ep * sizeof(struct ep_queue_head);
@@ -2262,8 +2264,7 @@ static int struct_udc_setup(struct fsl_udc *udc,
 					&udc->ep_qh_dma, GFP_KERNEL);
 	if (!udc->ep_qh) {
 		ERR("malloc QHs for udc failed\n");
-		kfree(udc->eps);
-		return -1;
+		goto ep_queue_alloc_failed;
 	}
 
 	udc->ep_qh_size = size;
@@ -2272,8 +2273,17 @@ static int struct_udc_setup(struct fsl_udc *udc,
 	/* FIXME: fsl_alloc_request() ignores ep argument */
 	udc->status_req = container_of(fsl_alloc_request(NULL, GFP_KERNEL),
 			struct fsl_req, req);
+	if (!udc->status_req) {
+		ERR("kzalloc for udc status request failed\n");
+		goto udc_status_alloc_failed;
+	}
+
 	/* allocate a small amount of memory to get valid address */
 	udc->status_req->req.buf = kmalloc(8, GFP_KERNEL);
+	if (!udc->status_req->req.buf) {
+		ERR("kzalloc for udc request buffer failed\n");
+		goto udc_req_buf_alloc_failed;
+	}
 
 	udc->resume_state = USB_STATE_NOTATTACHED;
 	udc->usb_state = USB_STATE_POWERED;
@@ -2281,6 +2291,18 @@ static int struct_udc_setup(struct fsl_udc *udc,
 	udc->remote_wakeup = 0;	/* default to 0 on reset */
 
 	return 0;
+
+udc_req_buf_alloc_failed:
+	kfree(udc->status_req);
+udc_status_alloc_failed:
+	kfree(udc->ep_qh);
+	udc->ep_qh_size = 0;
+ep_queue_alloc_failed:
+	kfree(udc->eps);
+eps_alloc_failed:
+	udc->phy_mode = 0;
+	return -1;
+
 }
 
 /*----------------------------------------------------------------
-- 
2.1.4