[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1535624539-7839-2-git-send-email-manish.narani@xilinx.com>
Date: Thu, 30 Aug 2018 15:52:17 +0530
From: Manish Narani <manish.narani@...inx.com>
To: <jic23@...nel.org>, <knaack.h@....de>, <lars@...afoo.de>,
<pmeerw@...erw.net>, <robh+dt@...nel.org>, <mark.rutland@....com>,
<michal.simek@...inx.com>, <manish.narani@...inx.com>,
<leoyang.li@....com>, <sudeep.holla@....com>,
<amit.kucheria@...aro.org>, <broonie@...nel.org>,
<arnaud.pouliquen@...com>, <geert@...ux-m68k.org>,
<eugen.hristev@...rochip.com>, <rdunlap@...radead.org>,
<lukas@...ner.de>, <freeman.liu@...eadtrum.com>,
<vilhelm.gray@...il.com>, <tglx@...utronix.de>,
<baolin.wang@...aro.org>, <gregkh@...uxfoundation.org>
CC: <sgoud@...inx.com>, <anirudh@...inx.com>,
<linux-iio@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH 1/3] dt-bindings: iio: adc: Add Xilinx AMS binding documentation
Xilinx AMS have several ADC channels that can be used for measurement of
different voltages and temperatures. Document the same in the bindings.
Signed-off-by: Manish Narani <manish.narani@...inx.com>
---
.../devicetree/bindings/iio/adc/xilinx-ams.txt | 159 +++++++++++++++++++++
1 file changed, 159 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/xilinx-ams.txt
diff --git a/Documentation/devicetree/bindings/iio/adc/xilinx-ams.txt b/Documentation/devicetree/bindings/iio/adc/xilinx-ams.txt
new file mode 100644
index 0000000..8cc96f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/xilinx-ams.txt
@@ -0,0 +1,159 @@
+Xilinx AMS controller
+
+The AMS includes an ADC as well as on-chip sensors that can be used to
+sample external voltages and monitor on-die operating conditions, such as
+temperature and supply voltage levels. The AMS has two SYSMON blocks.
+PL-SYSMON block is capable of monitoring off chip voltage and temperature.
+PL-SYSMON block has DRP, JTAG and I2C interface to enable monitoring from
+external master. Out of this interface currently only DRP is supported.
+Other block PS-SYSMON is memory mapped to PS. Both of block has built-in
+alarm generation logic that is used to interrupt the processor based on
+condition set.
+
+All designs should have AMS registers, but PS and PL are optional. The
+AMS controller can work with only PS, only PL and both PS and PL
+configurations. Please specify registers according to your design. Devicetree
+should always have AMS module property. Providing PS & PL module is optional.
+
+Required properties:
+ - compatible: Should be "xlnx,zynqmp-ams"
+ - reg: Should specify AMS register space
+ - interrupts: Interrupt number for the AMS control interface
+ - interrupt-names: Interrupt name, must be "ams-irq"
+ - clocks: Should contain a clock specifier for the device
+ - ranges: keep the property empty to map child address space
+ (for PS and/or PL) nodes 1:1 onto the parent address
+ space
+
+AMS device tree subnode:
+ - compatible: Should be "xlnx,zynqmp-ams-ps" or "xlnx,zynqmp-ams-pl"
+ - reg: Register space for PS or PL
+
+Optional properties:
+
+Following optional property only valid for PL.
+ - xlnx,ext-channels: List of external channels that are connected to the
+ AMS PL module.
+
+ The child nodes of this node represent the external channels which are
+ connected to the AMS Module. If the property is not present
+ no external channels will be assumed to be connected.
+
+ Each child node represents one channel and has the following
+ properties:
+ Required properties:
+ * reg: Pair of pins the channel is connected to.
+ 0: VP/VN
+ 1: VUSER0
+ 2: VUSER1
+ 3: VUSER3
+ 4: VUSER4
+ 5: VAUXP[0]/VAUXN[0]
+ 6: VAUXP[1]/VAUXN[1]
+ ...
+ 20: VAUXP[15]/VAUXN[15]
+ Note each channel number should only be used at most
+ once.
+ Optional properties:
+ * xlnx,bipolar: If set the channel is used in bipolar
+ mode.
+
+
+Example:
+ xilinx_ams: ams@...50000 {
+ compatible = "xlnx,zynqmp-ams";
+ interrupt-parent = <&gic>;
+ interrupts = <0 56 4>;
+ interrupt-names = "ams-irq";
+ clocks = <&clkc 70>;
+ reg = <0x0 0xffa50000 0x0 0x800>;
+ reg-names = "ams-base";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ams_ps: ams_ps@...50800 {
+ compatible = "xlnx,zynqmp-ams-ps";
+ reg = <0x0 0xffa50800 0x0 0x400>;
+ };
+
+ ams_pl: ams_pl@...50c00 {
+ compatible = "xlnx,zynqmp-ams-pl";
+ reg = <0x0 0xffa50c00 0x0 0x400>;
+ xlnx,ext-channels {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ channel@0 {
+ reg = <0>;
+ xlnx,bipolar;
+ };
+ channel@1 {
+ reg = <1>;
+ };
+ channel@8 {
+ reg = <8>;
+ xlnx,bipolar;
+ };
+ };
+ };
+ };
+
+AMS Channels Details:
+
+Sysmon Block |Channel| Details |Measurement
+ Number Type
+---------------------------------------------------------------------------------------------------------
+AMS CTRL |0 |System PLLs voltage measurement, VCC_PSPLL. |Voltage
+ |1 |Battery voltage measurement, VCC_PSBATT. |Voltage
+ |2 |PL Internal voltage measurement, VCCINT. |Voltage
+ |3 |Block RAM voltage measurement, VCCBRAM. |Voltage
+ |4 |PL Aux voltage measurement, VCCAUX. |Voltage
+ |5 |Voltage measurement for six DDR I/O PLLs, VCC_PSDDR_PLL. |Voltage
+ |6 |VCC_PSINTFP_DDR voltage measurement. |Voltage
+---------------------------------------------------------------------------------------------------------
+PS Sysmon |7 |LPD temperature measurement. |Temperature
+ |8 |FPD Temperature Measurment (REMOTE). |Temperature
+ |9 |VCC PS LPD voltage measurement (supply1). |Voltage
+ |10 |VCC PS FPD voltage measurement (supply2). |Voltage
+ |11 |PS Aux voltage reference (supply3). |Voltage
+ |12 |DDR I/O VCC voltage measurement. |Voltage
+ |13 |PS IO Bank 503 voltage measurement (supply5). |Voltage
+ |14 |PS IO Bank 500 voltage measurement (supply6). |Voltage
+ |15 |VCCO_PSIO1 voltage measurement. |Voltage
+ |16 |VCCO_PSIO2 voltage measurement. |Voltage
+ |17 |VCC_PS_GTR voltage measurement (VPS_MGTRAVCC). |Voltage
+ |18 |VTT_PS_GTR voltage measurement (VPS_MGTRAVTT). |Voltage
+ |19 |VCC_PSADC voltage measurement. |Voltage
+---------------------------------------------------------------------------------------------------------
+PL Sysmon |20 |PL Temperature measurement. |Temperature
+ |21 |PL Internal Voltage Voltage measurement, VCCINT. |Voltage
+ |22 |PL Auxiliary Voltage measurement, VCCAUX. |Voltage
+ |23 |ADC Reference P+ Voltage measurement. |Voltage
+ |24 |ADC Reference N- Voltage measurement. |Voltage
+ |25 |PL Block RAM Voltage measurement, VCCBRAM. |Voltage
+ |26 |LPD Internal Voltage measurement, VCC_PSINTLP (supply4). |Voltage
+ |27 |FPD Internal Voltage measurement, VCC_PSINTFP (supply5). |Voltage
+ |28 |PS Auxiliary Voltage measurement (supply6). |Voltage
+ |29 |PL VCCADC Voltage measurement (vccams). |Voltage
+ |30 |Differencial analog input signal Voltage measurment. |Voltage
+ |31 |VUser0 Voltage measurement (supply7). |Voltage
+ |32 |VUser1 Voltage measurement (supply8). |Voltage
+ |33 |VUser2 Voltage measurement (supply9). |Voltage
+ |34 |VUser3 Voltage measurement (supply10). |Voltage
+ |35 |Auxiliary ch 0 Voltage measurement (VAux0). |Voltage
+ |36 |Auxiliary ch 1 Voltage measurement (VAux1). |Voltage
+ |37 |Auxiliary ch 2 Voltage measurement (VAux2). |Voltage
+ |38 |Auxiliary ch 3 Voltage measurement (VAux3). |Voltage
+ |39 |Auxiliary ch 4 Voltage measurement (VAux4). |Voltage
+ |40 |Auxiliary ch 5 Voltage measurement (VAux5). |Voltage
+ |41 |Auxiliary ch 6 Voltage measurement (VAux6). |Voltage
+ |42 |Auxiliary ch 7 Voltage measurement (VAux7). |Voltage
+ |43 |Auxiliary ch 8 Voltage measurement (VAux8). |Voltage
+ |44 |Auxiliary ch 9 Voltage measurement (VAux9). |Voltage
+ |45 |Auxiliary ch 10 Voltage measurement (VAux10). |Voltage
+ |46 |Auxiliary ch 11 Voltage measurement (VAux11). |Voltage
+ |47 |Auxiliary ch 12 Voltage measurement (VAux12). |Voltage
+ |48 |Auxiliary ch 13 Voltage measurement (VAux13). |Voltage
+ |49 |Auxiliary ch 14 Voltage measurement (VAux14). |Voltage
+ |50 |Auxiliary ch 15 Voltage measurement (VAux15). |Voltage
+---------------------------------------------------------------------------------------------------------
--
2.1.1
Powered by blists - more mailing lists