linux-kernel - [PATCH 2/2] Revert "serial: sh-sci: Allow for compressed SCIF address"

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 30 Aug 2018 14:54:04 +0200
From:   Geert Uytterhoeven <geert+renesas@...der.be>
To:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc:     Jiri Slaby <jslaby@...e.com>,
        Chris Brandt <chris.brandt@...esas.com>,
        Wolfram Sang <wsa+renesas@...g-engineering.com>,
        Ulrich Hecht <uli+renesas@...nd.eu>,
        linux-serial@...r.kernel.org, linux-renesas-soc@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        Geert Uytterhoeven <geert+renesas@...der.be>
Subject: [PATCH 2/2] Revert "serial: sh-sci: Allow for compressed SCIF address"

This reverts commit 2d4dd0da45401c7ae7332b4d1eb7bbb1348edde9.

This broke earlycon on all Renesas ARM platforms using a SCIF port for the
serial console (R-Car, RZ/A1, RZ/G1, RZ/G2 SoCs), due to an incorrect value
of port->regshift.

Signed-off-by: Geert Uytterhoeven <geert+renesas@...der.be>
---
 drivers/tty/serial/sh-sci.c | 25 ++++++++++---------------
 1 file changed, 10 insertions(+), 15 deletions(-)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 5d42c9a63001575a..ab3f6e91853da3c2 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -346,15 +346,15 @@ static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = {
 	[SCIx_SH4_SCIF_REGTYPE] = {
 		.regs = {
 			[SCSMR]		= { 0x00, 16 },
-			[SCBRR]		= { 0x02,  8 },
-			[SCSCR]		= { 0x04, 16 },
-			[SCxTDR]	= { 0x06,  8 },
-			[SCxSR]		= { 0x08, 16 },
-			[SCxRDR]	= { 0x0a,  8 },
-			[SCFCR]		= { 0x0c, 16 },
-			[SCFDR]		= { 0x0e, 16 },
-			[SCSPTR]	= { 0x10, 16 },
-			[SCLSR]		= { 0x12, 16 },
+			[SCBRR]		= { 0x04,  8 },
+			[SCSCR]		= { 0x08, 16 },
+			[SCxTDR]	= { 0x0c,  8 },
+			[SCxSR]		= { 0x10, 16 },
+			[SCxRDR]	= { 0x14,  8 },
+			[SCFCR]		= { 0x18, 16 },
+			[SCFDR]		= { 0x1c, 16 },
+			[SCSPTR]	= { 0x20, 16 },
+			[SCLSR]		= { 0x24, 16 },
 		},
 		.fifosize = 16,
 		.overrun_reg = SCLSR,
@@ -2837,7 +2837,7 @@ static int sci_init_single(struct platform_device *dev,
 {
 	struct uart_port *port = &sci_port->port;
 	const struct resource *res;
-	unsigned int i, regtype;
+	unsigned int i;
 	int ret;
 
 	sci_port->cfg	= p;
@@ -2874,7 +2874,6 @@ static int sci_init_single(struct platform_device *dev,
 	if (unlikely(sci_port->params == NULL))
 		return -EINVAL;
 
-	regtype = sci_port->params - sci_port_params;
 	switch (p->type) {
 	case PORT_SCIFB:
 		sci_port->rx_trigger = 48;
@@ -2929,10 +2928,6 @@ static int sci_init_single(struct platform_device *dev,
 			port->regshift = 1;
 	}
 
-	if (regtype == SCIx_SH4_SCIF_REGTYPE)
-		if (sci_port->reg_size >= 0x20)
-			port->regshift = 1;
-
 	/*
 	 * The UART port needs an IRQ value, so we peg this to the RX IRQ
 	 * for the multi-IRQ ports, which is where we are primarily
-- 
2.17.1