[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <386d4bc2-96a7-826f-392f-e54d3367e217@xs4all.nl>
Date: Fri, 31 Aug 2018 11:00:34 +0200
From: Hans Verkuil <hverkuil@...all.nl>
To: Maxime Jourdan <mjourdan@...libre.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Kevin Hilman <khilman@...libre.com>,
Rob Herring <robh+dt@...nel.org>
Cc: Hans Verkuil <hans.verkuil@...co.com>,
Jerome Brunet <jbrunet@...libre.com>,
Neil Armstrong <narmstrong@...libre.com>,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
linux-media@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-amlogic@...ts.infradead.org
Subject: Re: [PATCH 0/4] Add Amlogic video decoder driver
On 08/31/2018 10:52 AM, Maxime Jourdan wrote:
> Hi everyone,
>
> This patch series adds support for the Amlogic video decoder,
> as well as the corresponding dt bindings for GXBB/GXL/GXM chips.
>
> It features decoding for the following formats:
> - MPEG 1
> - MPEG 2
>
> The following formats will be added in future patches:
> - MJPEG
> - MPEG 4 (incl. Xvid, H.263)
> - H.264
> - HEVC (incl. 10-bit)
>
> The following formats' development has still not started, but they are
> supported by the hardware:
> - VC1
> - VP9
>
> The code was made in such a way to allow easy inclusion of those formats
> in the future.
>
> The decoder is single instance.
>
> Files:
> - vdec.c handles the V4L2 M2M logic
> - esparser.c manages the hardware bitstream parser
> - vdec_helpers.c provides helpers to DONE the dst buffers as well as
> various common code used by the codecs
> - vdec_1.c manages the VDEC_1 block of the vdec IP
> - codec_mpeg12.c enables decoding for MPEG 1/2.
> - vdec_platform.c links codec units with vdec units
> (e.g vdec_1 with codec_mpeg12) and lists all the available
> src/dst formats and requirements (max width/height, etc.),
> per compatible chip.
>
> Firmwares are necessary to run the vdec. They can currently be found at:
> https://github.com/chewitt/meson-firmware
>
> It was tested primarily with ffmpeg's v4l2-m2m implementation. For instance:
> $ ffmpeg -c:v mpeg2_v4l2m2m -i sample_mpeg2.mkv -f null -
>
> Note: This patch series depends on
> "[PATCH v3 0/3] soc: amlogic: add meson-canvas"
> https://patchwork.kernel.org/cover/10573763/
>
> The v4l2-compliance results are available below the patch diff.
>
> Maxime Jourdan (4):
> dt-bindings: media: add Amlogic Video Decoder Bindings
> media: meson: add v4l2 m2m video decoder driver
> ARM64: dts: meson-gx: add vdec entry
> ARM64: dts: meson: add vdec entries
>
> .../bindings/media/amlogic,vdec.txt | 63 ++
> arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 13 +
> arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 11 +
> arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 11 +
> arch/arm64/boot/dts/amlogic/meson-gxm.dtsi | 4 +
> drivers/media/platform/Kconfig | 10 +
> drivers/media/platform/meson/Makefile | 1 +
> drivers/media/platform/meson/vdec/Makefile | 8 +
> .../media/platform/meson/vdec/codec_mpeg12.c | 169 +++
> .../media/platform/meson/vdec/codec_mpeg12.h | 13 +
> drivers/media/platform/meson/vdec/dos_regs.h | 97 ++
> drivers/media/platform/meson/vdec/esparser.c | 367 +++++++
> drivers/media/platform/meson/vdec/esparser.h | 27 +
> drivers/media/platform/meson/vdec/vdec.c | 987 ++++++++++++++++++
> drivers/media/platform/meson/vdec/vdec.h | 233 +++++
> drivers/media/platform/meson/vdec/vdec_1.c | 227 ++++
> drivers/media/platform/meson/vdec/vdec_1.h | 13 +
> .../media/platform/meson/vdec/vdec_helpers.c | 353 +++++++
> .../media/platform/meson/vdec/vdec_helpers.h | 44 +
> .../media/platform/meson/vdec/vdec_platform.c | 100 ++
> .../media/platform/meson/vdec/vdec_platform.h | 29 +
> 21 files changed, 2780 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/amlogic,vdec.txt
> create mode 100644 drivers/media/platform/meson/vdec/Makefile
> create mode 100644 drivers/media/platform/meson/vdec/codec_mpeg12.c
> create mode 100644 drivers/media/platform/meson/vdec/codec_mpeg12.h
> create mode 100644 drivers/media/platform/meson/vdec/dos_regs.h
> create mode 100644 drivers/media/platform/meson/vdec/esparser.c
> create mode 100644 drivers/media/platform/meson/vdec/esparser.h
> create mode 100644 drivers/media/platform/meson/vdec/vdec.c
> create mode 100644 drivers/media/platform/meson/vdec/vdec.h
> create mode 100644 drivers/media/platform/meson/vdec/vdec_1.c
> create mode 100644 drivers/media/platform/meson/vdec/vdec_1.h
> create mode 100644 drivers/media/platform/meson/vdec/vdec_helpers.c
> create mode 100644 drivers/media/platform/meson/vdec/vdec_helpers.h
> create mode 100644 drivers/media/platform/meson/vdec/vdec_platform.c
> create mode 100644 drivers/media/platform/meson/vdec/vdec_platform.h
>
> root@...retech-cc:~/v4l-utils# v4l2-compliance -d /dev/video0
> v4l2-compliance SHA: not available, 64 bits
I see that there is no SHA, so you probably didn't compile this from a
checked-out git repo. Please do so, since without a SHA I don't know
whether or not you used the latest v4l2-compliance version.
Regards,
Hans
>
> Compliance test for device /dev/video0:
>
> Driver Info:
> Driver name : meson-vdec
> Card type : Amlogic Video Decoder
> Bus info : platform:meson-vdec
> Driver version : 4.18.0
> Capabilities : 0x84204000
> Video Memory-to-Memory Multiplanar
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x04204000
> Video Memory-to-Memory Multiplanar
> Streaming
> Extended Pix Format
>
> Required ioctls:
> test VIDIOC_QUERYCAP: OK
>
> Allow for multiple opens:
> test second /dev/video0 open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> test VIDIOC_QUERYCTRL: OK (Not Supported)
> test VIDIOC_G/S_CTRL: OK (Not Supported)
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 0 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK (Not Supported)
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK
>
> Buffer ioctls:
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> test VIDIOC_EXPBUF: OK
>
> Total: 43, Succeeded: 43, Failed: 0, Warnings: 0
>
Powered by blists - more mailing lists