Date:   Fri, 31 Aug 2018 11:05:56 +0200
From:   Maxime Ripard <maxime.ripard@...tlin.com>
To:     Philipp Rossak <embed3d@...il.com>
Cc:     lee.jones@...aro.org, robh+dt@...nel.org, mark.rutland@....com,
        wens@...e.org, linux@...linux.org.uk, jic23@...nel.org,
        knaack.h@....de, lars@...afoo.de, pmeerw@...erw.net,
        eugen.hristev@...rochip.com, rdunlap@...radead.org,
        vilhelm.gray@...il.com, clabbe.montjoie@...il.com,
        quentin.schulz@...tlin.com, geert+renesas@...der.be,
        lukas@...ner.de, icenowy@...c.io, arnd@...db.de,
        broonie@...nel.org, arnaud.pouliquen@...com,
        linux-iio@...r.kernel.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-sunxi@...glegroups.com
Subject: Re: [PATCH v3 18/30] iio: adc: sun4i-gpadc-iio: rework: support
 multiple sensors

On Thu, Aug 30, 2018 at 05:45:06PM +0200, Philipp Rossak wrote:
> For adding newer sensor some basic rework of the code is necessary.
> 
> This patch reworks the driver to be able to handle more than one
> thermal sensor. Newer SoC like the A80 have 4 thermal sensors.
> Because of this the maximal sensor count value was set to 4.
> 
> The sensor_id value is set during sensor registration and is for each
> registered sensor indiviual. This makes it able to differntiate the
> sensors when the value is read from the register.
> 
> In function sun4i_gpadc_read_raw(), the sensor number of the ths sensor
> was directly set to 0 (sun4i_gpadc_temp_read(x,x,0)). This selects
> in the temp_read function automatically sensor 0. A check for the
> sensor_id is here not required since the old sensors only have one
> thermal sensor. In addition to that is the sun4i_gpadc_read_raw()
> function only used by the "older" sensors (before A33) where the
> thermal sensor was a cobination of an adc and a thermal sensor.
> 
> Signed-off-by: Philipp Rossak <embed3d@...il.com>
> ---
>  drivers/iio/adc/sun4i-gpadc-iio.c   | 63 +++++++++++++++++++++++++------------
>  include/linux/iio/adc/sun4i-gpadc.h |  3 ++
>  2 files changed, 46 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
> index c12de48c4e86..18ab72e52d78 100644
> --- a/drivers/iio/adc/sun4i-gpadc-iio.c
> +++ b/drivers/iio/adc/sun4i-gpadc-iio.c
> @@ -69,6 +69,7 @@ struct gpadc_data {
>  	bool		has_bus_rst;
>  	bool		has_mod_clk;
>  	u32		temp_data_base;
> +	int		sensor_count;
>  };
>  
>  static irqreturn_t sun4i_gpadc_data_irq_handler(int irq, void *dev_id);
> @@ -84,6 +85,7 @@ static const struct gpadc_data sun4i_gpadc_data = {
>  	.ths_irq_thread = sun4i_gpadc_data_irq_handler,
>  	.support_irq = true,
>  	.temp_data_base = SUN4I_GPADC_TEMP_DATA,
> +	.sensor_count = 1,
>  };
>  
>  static const struct gpadc_data sun5i_gpadc_data = {
> @@ -97,6 +99,7 @@ static const struct gpadc_data sun5i_gpadc_data = {
>  	.ths_irq_thread = sun4i_gpadc_data_irq_handler,
>  	.support_irq = true,
>  	.temp_data_base = SUN4I_GPADC_TEMP_DATA,
> +	.sensor_count = 1,
>  };
>  
>  static const struct gpadc_data sun6i_gpadc_data = {
> @@ -110,6 +113,7 @@ static const struct gpadc_data sun6i_gpadc_data = {
>  	.ths_irq_thread = sun4i_gpadc_data_irq_handler,
>  	.support_irq = true,
>  	.temp_data_base = SUN4I_GPADC_TEMP_DATA,
> +	.sensor_count = 1,
>  };
>  
>  static const struct gpadc_data sun8i_a33_gpadc_data = {
> @@ -117,6 +121,13 @@ static const struct gpadc_data sun8i_a33_gpadc_data = {
>  	.temp_scale = 162,
>  	.tp_mode_en = SUN8I_A33_GPADC_CTRL1_CHOP_TEMP_EN,
>  	.temp_data_base = SUN4I_GPADC_TEMP_DATA,
> +	.sensor_count = 1,
> +};
> +
> +struct sun4i_sensor_tzd {
> +	struct sun4i_gpadc_iio		*info;
> +	struct thermal_zone_device	*tzd;
> +	unsigned int			sensor_id;
>  };
>  
>  struct sun4i_gpadc_iio {
> @@ -130,7 +141,7 @@ struct sun4i_gpadc_iio {
>  	const struct gpadc_data		*data;
>  	/* prevents concurrent reads of temperature and ADC */
>  	struct mutex			mutex;
> -	struct thermal_zone_device	*tzd;
> +	struct sun4i_sensor_tzd		tzds[MAX_SENSOR_COUNT];
>  	struct device			*sensor_device;
>  	struct clk			*bus_clk;
>  	struct clk			*mod_clk;
> @@ -280,7 +291,8 @@ static int sun4i_gpadc_adc_read(struct iio_dev *indio_dev, int channel,
>  			SUN4I_GPADC_IRQ_FIFO_DATA);
>  }
>  
> -static int sun4i_gpadc_temp_read(struct iio_dev *indio_dev, int *val)
> +static int sun4i_gpadc_temp_read(struct iio_dev *indio_dev, int *val,
> +				int sensor)
>  {
>  	struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
>  
> @@ -290,7 +302,8 @@ static int sun4i_gpadc_temp_read(struct iio_dev *indio_dev, int *val)
>  
>  	pm_runtime_get_sync(indio_dev->dev.parent);
>  
> -	regmap_read(info->regmap, info->data->temp_data_base, val);
> +	regmap_read(info->regmap, info->data->temp_data_base + 0x4 * sensor,
> +			val);
>  
>  	pm_runtime_mark_last_busy(indio_dev->dev.parent);
>  	pm_runtime_put_autosuspend(indio_dev->dev.parent);
> @@ -334,7 +347,7 @@ static int sun4i_gpadc_read_raw(struct iio_dev *indio_dev,
>  			ret = sun4i_gpadc_adc_read(indio_dev, chan->channel,
>  						   val);
>  		else
> -			ret = sun4i_gpadc_temp_read(indio_dev, val);
> +			ret = sun4i_gpadc_temp_read(indio_dev, val, 0);
>  
>  		if (ret)
>  			return ret;
> @@ -420,10 +433,11 @@ static int sun4i_gpadc_runtime_resume(struct device *dev)
>  
>  static int sun4i_gpadc_get_temp(void *data, int *temp)
>  {
> -	struct sun4i_gpadc_iio *info = data;
> +	struct sun4i_sensor_tzd *tzd = data;
> +	struct sun4i_gpadc_iio *info = tzd->info;
>  	int val, scale, offset;
>  
> -	if (sun4i_gpadc_temp_read(info->indio_dev, &val))
> +	if (sun4i_gpadc_temp_read(info->indio_dev, &val, tzd->sensor_id))
>  		return -ETIMEDOUT;
>  
>  	sun4i_gpadc_temp_scale(info->indio_dev, &scale);
> @@ -569,7 +583,7 @@ static int sun4i_gpadc_probe(struct platform_device *pdev)
>  {
>  	struct sun4i_gpadc_iio *info;
>  	struct iio_dev *indio_dev;
> -	int ret;
> +	int ret, i;
>  
>  	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
>  	if (!indio_dev)
> @@ -603,18 +617,24 @@ static int sun4i_gpadc_probe(struct platform_device *pdev)
>  	pm_runtime_set_suspended(&pdev->dev);
>  	pm_runtime_enable(&pdev->dev);
>  
> -	info->tzd = thermal_zone_of_sensor_register(info->sensor_device,
> -						    0, info,
> -						    &sun4i_ts_tz_ops);
> -	/*
> -	 * Do not fail driver probing when failing to register in
> -	 * thermal because no thermal DT node is found.
> -	 */
> -	if (IS_ERR(info->tzd) && PTR_ERR(info->tzd) != -ENODEV) {
> -		dev_err(&pdev->dev,
> -			"could not register thermal sensor: %ld\n",
> -			PTR_ERR(info->tzd));
> -		return PTR_ERR(info->tzd);
> +	for (i = 0; i < info->data->sensor_count; i++) {
> +		info->tzds[i].info = info;
> +		info->tzds[i].sensor_id = i;
> +
> +		info->tzds[i].tzd = thermal_zone_of_sensor_register(

This isn't where should wrap your line.

> +				info->sensor_device,
> +				i, &info->tzds[i], &sun4i_ts_tz_ops);
> +		/*
> +		 * Do not fail driver probing when failing to register in
> +		 * thermal because no thermal DT node is found.
> +		 */
> +		if (IS_ERR(info->tzds[i].tzd) && \

And you don't need the \ here.

> +				PTR_ERR(info->tzds[i].tzd) != -ENODEV) {
> +			dev_err(&pdev->dev,
> +				"could not register thermal sensor: %ld\n",
> +				PTR_ERR(info->tzds[i].tzd));
> +			return PTR_ERR(info->tzds[i].tzd);
> +		}

If you're failing half way through the registration, you won't free
the first sensors registered.

Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)

Powered by blists - more mailing lists