| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 31 Aug 2018 18:34:55 +0900
From: Masahiro Yamada <yamada.masahiro@...ionext.com>
To: linux-kbuild@...r.kernel.org
Cc: Meelis Roos <mroos@...ux.ee>, Randy Dunlap <rdunlap@...radead.org>,
Masahiro Yamada <yamada.masahiro@...ionext.com>,
linux-kernel@...r.kernel.org, Jonathan Corbet <corbet@....net>,
linux-doc@...r.kernel.org
Subject: [PATCH] kconfig: do not require pkg-config on make {menu,n}config
Meelis Roos reported a {menu,n}config regression:
"I have libncurses devel package installed in the default system
location (as do 99%+ on actual developers probably) and in this
case, pkg-config is useless. pkg-config is needed only when
libraries and headers are installed in non-default locations but
it is bad to require installation of pkg-config on all the machines
where make menuconfig would be possibly run."
For {menu,n}config, do not use pkg-config if it is not installed.
For {g,x}config, keep checking pkg-config since we really rely on it
for finding the installation paths of the required packages.
Fixes: 4ab3b80159d4 ("kconfig: check for pkg-config on make {menu,n,g,x}config")
Reported-by: Meelis Roos <mroos@...ux.ee>
Signed-off-by: Masahiro Yamada <yamada.masahiro@...ionext.com>
---
Documentation/process/changes.rst | 2 +-
scripts/kconfig/Makefile | 1 -
scripts/kconfig/check-pkgconfig.sh | 8 --------
scripts/kconfig/gconf-cfg.sh | 7 +++++++
scripts/kconfig/mconf-cfg.sh | 25 ++++++++++++++-----------
scripts/kconfig/nconf-cfg.sh | 25 ++++++++++++++-----------
scripts/kconfig/qconf-cfg.sh | 7 +++++++
7 files changed, 43 insertions(+), 32 deletions(-)
delete mode 100644 scripts/kconfig/check-pkgconfig.sh
diff --git a/Documentation/process/changes.rst b/Documentation/process/changes.rst
index 61f918b..d1bf143 100644
--- a/Documentation/process/changes.rst
+++ b/Documentation/process/changes.rst
@@ -86,7 +86,7 @@ pkg-config
The build system, as of 4.18, requires pkg-config to check for installed
kconfig tools and to determine flags settings for use in
-'make {menu,n,g,x}config'. Previously pkg-config was being used but not
+'make {g,x}config'. Previously pkg-config was being used but not
verified or documented.
Flex
diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile
index 4a7bd21..67ed9f6 100644
--- a/scripts/kconfig/Makefile
+++ b/scripts/kconfig/Makefile
@@ -221,7 +221,6 @@ $(obj)/zconf.tab.o: $(obj)/zconf.lex.c
# check if necessary packages are available, and configure build flags
define filechk_conf_cfg
- $(CONFIG_SHELL) $(srctree)/scripts/kconfig/check-pkgconfig.sh; \
$(CONFIG_SHELL) $<
endef
diff --git a/scripts/kconfig/check-pkgconfig.sh b/scripts/kconfig/check-pkgconfig.sh
deleted file mode 100644
index 7a1c40b..0000000
--- a/scripts/kconfig/check-pkgconfig.sh
+++ /dev/null
@@ -1,8 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0
-# Check for pkg-config presence
-
-if [ -z $(command -v pkg-config) ]; then
- echo "'make *config' requires 'pkg-config'. Please install it." 1>&2
- exit 1
-fi
diff --git a/scripts/kconfig/gconf-cfg.sh b/scripts/kconfig/gconf-cfg.sh
index 533b3d8..480ecd8 100755
--- a/scripts/kconfig/gconf-cfg.sh
+++ b/scripts/kconfig/gconf-cfg.sh
@@ -3,6 +3,13 @@
PKG="gtk+-2.0 gmodule-2.0 libglade-2.0"
+if [ -z "$(command -v pkg-config)" ]; then
+ echo >&2 "*"
+ echo >&2 "* 'make gconfig' requires 'pkg-config'. Please install it."
+ echo >&2 "*"
+ exit 1
+fi
+
if ! pkg-config --exists $PKG; then
echo >&2 "*"
echo >&2 "* Unable to find the GTK+ installation. Please make sure that"
diff --git a/scripts/kconfig/mconf-cfg.sh b/scripts/kconfig/mconf-cfg.sh
index e6f9fac..c812872d 100755
--- a/scripts/kconfig/mconf-cfg.sh
+++ b/scripts/kconfig/mconf-cfg.sh
@@ -4,20 +4,23 @@
PKG="ncursesw"
PKG2="ncurses"
-if pkg-config --exists $PKG; then
- echo cflags=\"$(pkg-config --cflags $PKG)\"
- echo libs=\"$(pkg-config --libs $PKG)\"
- exit 0
-fi
+if [ -n "$(command -v pkg-config)" ]; then
+ if pkg-config --exists $PKG; then
+ echo cflags=\"$(pkg-config --cflags $PKG)\"
+ echo libs=\"$(pkg-config --libs $PKG)\"
+ exit 0
+ fi
-if pkg-config --exists $PKG2; then
- echo cflags=\"$(pkg-config --cflags $PKG2)\"
- echo libs=\"$(pkg-config --libs $PKG2)\"
- exit 0
+ if pkg-config --exists $PKG2; then
+ echo cflags=\"$(pkg-config --cflags $PKG2)\"
+ echo libs=\"$(pkg-config --libs $PKG2)\"
+ exit 0
+ fi
fi
-# Unfortunately, some distributions (e.g. openSUSE) cannot find ncurses
-# by pkg-config.
+# Check the default paths in case pkg-config is not installed.
+# (Even if it is installed, some distributions such as openSUSE cannot
+# find ncurses by pkg-config.)
if [ -f /usr/include/ncursesw/ncurses.h ]; then
echo cflags=\"-D_GNU_SOURCE -I/usr/include/ncursesw\"
echo libs=\"-lncursesw\"
diff --git a/scripts/kconfig/nconf-cfg.sh b/scripts/kconfig/nconf-cfg.sh
index 42f5ac7..001559e 100644
--- a/scripts/kconfig/nconf-cfg.sh
+++ b/scripts/kconfig/nconf-cfg.sh
@@ -4,20 +4,23 @@
PKG="ncursesw menuw panelw"
PKG2="ncurses menu panel"
-if pkg-config --exists $PKG; then
- echo cflags=\"$(pkg-config --cflags $PKG)\"
- echo libs=\"$(pkg-config --libs $PKG)\"
- exit 0
-fi
+if [ -n "$(command -v pkg-config)" ]; then
+ if pkg-config --exists $PKG; then
+ echo cflags=\"$(pkg-config --cflags $PKG)\"
+ echo libs=\"$(pkg-config --libs $PKG)\"
+ exit 0
+ fi
-if pkg-config --exists $PKG2; then
- echo cflags=\"$(pkg-config --cflags $PKG2)\"
- echo libs=\"$(pkg-config --libs $PKG2)\"
- exit 0
+ if pkg-config --exists $PKG2; then
+ echo cflags=\"$(pkg-config --cflags $PKG2)\"
+ echo libs=\"$(pkg-config --libs $PKG2)\"
+ exit 0
+ fi
fi
-# Unfortunately, some distributions (e.g. openSUSE) cannot find ncurses
-# by pkg-config.
+# Check the default paths in case pkg-config is not installed.
+# (Even if it is installed, some distributions such as openSUSE cannot
+# find ncurses by pkg-config.)
if [ -f /usr/include/ncursesw/ncurses.h ]; then
echo cflags=\"-D_GNU_SOURCE -I/usr/include/ncursesw\"
echo libs=\"-lncursesw -lmenuw -lpanelw\"
diff --git a/scripts/kconfig/qconf-cfg.sh b/scripts/kconfig/qconf-cfg.sh
index 0862e15..02ccc0a 100755
--- a/scripts/kconfig/qconf-cfg.sh
+++ b/scripts/kconfig/qconf-cfg.sh
@@ -4,6 +4,13 @@
PKG="Qt5Core Qt5Gui Qt5Widgets"
PKG2="QtCore QtGui"
+if [ -z "$(command -v pkg-config)" ]; then
+ echo >&2 "*"
+ echo >&2 "* 'make xconfig' requires 'pkg-config'. Please install it."
+ echo >&2 "*"
+ exit 1
+fi
+
if pkg-config --exists $PKG; then
echo cflags=\"-std=c++11 -fPIC $(pkg-config --cflags Qt5Core Qt5Gui Qt5Widgets)\"
echo libs=\"$(pkg-config --libs $PKG)\"
--
2.7.4
Powered by blists - more mailing lists