linux-kernel - Re: [PATCH] remoteproc: qcom: Rename Hexagon v5 PAS driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20180831094450.GA17121@centauri.lan>
Date:   Fri, 31 Aug 2018 11:44:50 +0200
From:   Niklas Cassel <niklas.cassel@...aro.org>
To:     Bjorn Andersson <bjorn.andersson@...aro.org>
Cc:     Ohad Ben-Cohen <ohad@...ery.com>, linux-remoteproc@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        Rohit kumar <rohitkr@...eaurora.org>
Subject: Re: [PATCH] remoteproc: qcom: Rename Hexagon v5 PAS driver

On Thu, Aug 30, 2018 at 08:10:53PM -0700, Bjorn Andersson wrote:
> On Wed 29 Aug 02:25 PDT 2018, Niklas Cassel wrote:
> 
> > On Mon, Aug 27, 2018 at 10:12:03PM -0700, Bjorn Andersson wrote:
> > > The Hexagon v5 ADSP driver is used for more than only the ADSP and
> > > there's an upcoming non-PAS ADSP PIL for SDM845, so rename the driver to
> > > qcom_q6v5_pas in order to better suite this.
> > 
> > Hello Bjorn,
> > 
> > so I'm a bit new to this, but after your rename we will have:
> > 
> > QCOM_Q6V5_PIL
> > and
> > QCOM_Q6V5_PAS
> > 
> > that both are PILs.
> > I guess that the difference is that the latter uses TrustZone?
> > 
> > The ADSP for some QCOM SoCs is a Hexagon v5, therefore the
> > QCOM_Q6V5_PAS can also boot certain ADSPs?
> > 
> > But we also have QCOM_Q6V5_WCSS
> > "Qualcomm Hexagon based WCSS Peripheral Image Loader",
> > which also appears to be Hexagon v5 based, but I assume that
> > neither QCOM_Q6V5_PIL nor QCOM_Q6V5_PAS can boot the WCSS?
> > 
> > There is also an upcoming non-PAS ADSP PIL loader for SDM845,
> > but I guess that the ADSP there is not based on Hexagon v5,
> > so the QCOM_Q6V5_PIL will not be able to boot it?
> > 
> > This all seems to be quite confusing, perhaps the help texts
> > could be improved to mitigate this confusion?
> > 
> 
> You're right, as proposed this is confusing.
> 
> The plan is to have QCOM_Q6V5_PAS, which deals with standard Hexagon
> peripherals that relies on the PAS service in TrustZone and then rename
> QCOM_Q6V5_PIL to QCOM_Q6V5_MSA to denote that this is the remoteproc
> driver for the self-authenticating modem.

Ok. It might be a good idea to send both driver renames in a single
patch series, so that it is easier to verify that the renaming is
consistent.

> 
> The QCOM_Q6V5_WCSS then fits into this pattern, of being the non-TZ
> based WCSS remoteproc driver.
> 
> > > 
> > > Cc: Rohit kumar <rohitkr@...eaurora.org>
> > > Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
> > > ---
> > >  drivers/remoteproc/Kconfig                    | 22 +++++++++----------
> > >  drivers/remoteproc/Makefile                   |  2 +-
> > >  .../{qcom_adsp_pil.c => qcom_q6v5_pas.c}      |  4 ++--
> > 
> > You should probably also edit the qcom_defconfig:
> > arch/arm/configs/qcom_defconfig:CONFIG_QCOM_ADSP_PIL=y
> > 
> 
> Yes, this needs to be done as well. But needs to be done in a separate
> patch.

Doing it in the same patch would ensure that we don't break bisectability.



Kind regards,
Niklas

> 
> > >  3 files changed, 14 insertions(+), 14 deletions(-)
> > >  rename drivers/remoteproc/{qcom_adsp_pil.c => qcom_q6v5_pas.c} (98%)
> > > 
> > > diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
> > > index 052d4dd347f9..c98c0b2a2237 100644
> > > --- a/drivers/remoteproc/Kconfig
> > > +++ b/drivers/remoteproc/Kconfig
> > > @@ -84,8 +84,16 @@ config KEYSTONE_REMOTEPROC
> > >  	  It's safe to say N here if you're not interested in the Keystone
> > >  	  DSPs or just want to use a bare minimum kernel.
> > >  
> > > -config QCOM_ADSP_PIL
> > > -	tristate "Qualcomm ADSP Peripheral Image Loader"
> > > +config QCOM_RPROC_COMMON
> > > +	tristate
> > > +
> > > +config QCOM_Q6V5_COMMON
> > > +	tristate
> > > +	depends on ARCH_QCOM
> > > +	depends on QCOM_SMEM
> > > +
> > > +config QCOM_Q6V5_PAS
> > > +	tristate "Qualcomm Hexagon v5 Peripheral Authentication Service support"
> > >  	depends on OF && ARCH_QCOM
> > >  	depends on QCOM_SMEM
> > >  	depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
> > > @@ -98,15 +106,7 @@ config QCOM_ADSP_PIL
> > >  	select QCOM_SCM
> > >  	help
> > >  	  Say y here to support the TrustZone based Peripherial Image Loader
> > 
> > Since you are editing this help text, yoy may just as well s/Peripherial/Peripheral.
> > 
> 
> Thanks, will do.
> 
> Regards,
> Bjorn
> 
> > Kind regards,
> > Niklas
> > 
> > > -	  for the Qualcomm ADSP remote processors.
> > > -
> > > -config QCOM_RPROC_COMMON
> > > -	tristate
> > > -
> > > -config QCOM_Q6V5_COMMON
> > > -	tristate
> > > -	depends on ARCH_QCOM
> > > -	depends on QCOM_SMEM
> > > +	  for the Qualcomm Hexagon v5 based remote processors.
> > >  
> > >  config QCOM_Q6V5_PIL
> > >  	tristate "Qualcomm Hexagon V5 Peripherial Image Loader"
> > > diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
> > > index 03332fa7e2ee..eb86c8ba5a87 100644
> > > --- a/drivers/remoteproc/Makefile
> > > +++ b/drivers/remoteproc/Makefile
> > > @@ -14,9 +14,9 @@ obj-$(CONFIG_OMAP_REMOTEPROC)		+= omap_remoteproc.o
> > >  obj-$(CONFIG_WKUP_M3_RPROC)		+= wkup_m3_rproc.o
> > >  obj-$(CONFIG_DA8XX_REMOTEPROC)		+= da8xx_remoteproc.o
> > >  obj-$(CONFIG_KEYSTONE_REMOTEPROC)	+= keystone_remoteproc.o
> > > -obj-$(CONFIG_QCOM_ADSP_PIL)		+= qcom_adsp_pil.o
> > >  obj-$(CONFIG_QCOM_RPROC_COMMON)		+= qcom_common.o
> > >  obj-$(CONFIG_QCOM_Q6V5_COMMON)		+= qcom_q6v5.o
> > > +obj-$(CONFIG_QCOM_Q6V5_PAS)		+= qcom_q6v5_pas.o
> > >  obj-$(CONFIG_QCOM_Q6V5_PIL)		+= qcom_q6v5_pil.o
> > >  obj-$(CONFIG_QCOM_Q6V5_WCSS)		+= qcom_q6v5_wcss.o
> > >  obj-$(CONFIG_QCOM_SYSMON)		+= qcom_sysmon.o
> > > diff --git a/drivers/remoteproc/qcom_adsp_pil.c b/drivers/remoteproc/qcom_q6v5_pas.c
> > > similarity index 98%
> > > rename from drivers/remoteproc/qcom_adsp_pil.c
> > > rename to drivers/remoteproc/qcom_q6v5_pas.c
> > > index d4339a6da616..2478ef3cd519 100644
> > > --- a/drivers/remoteproc/qcom_adsp_pil.c
> > > +++ b/drivers/remoteproc/qcom_q6v5_pas.c
> > > @@ -364,11 +364,11 @@ static struct platform_driver adsp_driver = {
> > >  	.probe = adsp_probe,
> > >  	.remove = adsp_remove,
> > >  	.driver = {
> > > -		.name = "qcom_adsp_pil",
> > > +		.name = "qcom_q6v5_pas",
> > >  		.of_match_table = adsp_of_match,
> > >  	},
> > >  };
> > >  
> > >  module_platform_driver(adsp_driver);
> > > -MODULE_DESCRIPTION("Qualcomm MSM8974/MSM8996 ADSP Peripherial Image Loader");
> > > +MODULE_DESCRIPTION("Qualcomm Hexagon v5 Peripheral Authentication Service driver");
> > >  MODULE_LICENSE("GPL v2");
> > > -- 
> > > 2.18.0
> > >