[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180831150218.8307-3-jbrunet@baylibre.com>
Date: Fri, 31 Aug 2018 17:02:17 +0200
From: Jerome Brunet <jbrunet@...libre.com>
To: Kevin Hilman <khilman@...libre.com>,
Carlo Caione <carlo@...one.org>
Cc: Jerome Brunet <jbrunet@...libre.com>,
linux-amlogic@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: [PATCH 2/3] arm64: dts: meson-axg: s400: add dmic codec
There are 7 digital mics on the MIC daughter board attached
to the s400 board, so add the digital microphone codec to
its DTS
Signed-off-by: Jerome Brunet <jbrunet@...libre.com>
---
arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index ff64c429d432..f3e16cbbc61e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -86,6 +86,15 @@
sound-name-prefix = "DIT";
};
+ dmics: audio-codec@3 {
+ #sound-dai-cells = <0>;
+ compatible = "dmic-codec";
+ num-channels = <7>;
+ wakeup-delay-ms = <50>;
+ status = "okay";
+ sound-name-prefix = "MIC";
+ };
+
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
--
2.17.1
Powered by blists - more mailing lists