linux-kernel - [PATCH] MIPS: generic: Add Network, SPI and I2C to ocelot

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-Id: <20180831150434.25050-1-alexandre.belloni@bootlin.com>
Date:   Fri, 31 Aug 2018 17:04:34 +0200
From:   Alexandre Belloni <alexandre.belloni@...tlin.com>
To:     James Hogan <jhogan@...nel.org>, Paul Burton <paul.burton@...s.com>
Cc:     Ralf Baechle <ralf@...ux-mips.org>, linux-kernel@...r.kernel.org,
        linux-mips@...ux-mips.org,
        Alexandre Belloni <alexandre.belloni@...tlin.com>
Subject: [PATCH] MIPS: generic: Add Network, SPI and I2C to ocelot_defconfig

Add support for the integrated switch, and the SPI and I2C controller found
on MSCC Ocelot.

Signed-off-by: Alexandre Belloni <alexandre.belloni@...tlin.com>
---
 arch/mips/configs/generic/board-ocelot.config | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/mips/configs/generic/board-ocelot.config b/arch/mips/configs/generic/board-ocelot.config
index aa815761d85e..f607888d2483 100644
--- a/arch/mips/configs/generic/board-ocelot.config
+++ b/arch/mips/configs/generic/board-ocelot.config
@@ -18,17 +18,25 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
 
-CONFIG_GPIO_SYSFS=y
+CONFIG_NETDEVICES=y
+CONFIG_MSCC_OCELOT_SWITCH=y
+CONFIG_MSCC_OCELOT_SWITCH_OCELOT=y
+CONFIG_MDIO_MSCC_MIIM=y
+CONFIG_MICROSEMI_PHY=y
 
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MUX=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
 
 CONFIG_SPI=y
 CONFIG_SPI_BITBANG=y
 CONFIG_SPI_DESIGNWARE=y
+CONFIG_SPI_DW_MMIO=y
 CONFIG_SPI_SPIDEV=y
 
+CONFIG_GPIO_SYSFS=y
+
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_OCELOT_RESET=y
 
-- 
2.19.0.rc1