[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180901081248.22639-5-marcel@ziswiler.com>
Date: Sat, 1 Sep 2018 10:12:18 +0200
From: Marcel Ziswiler <marcel@...wiler.com>
To: devicetree@...r.kernel.org, linux-tegra@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Marcel Ziswiler <marcel.ziswiler@...adex.com>,
Thierry Reding <thierry.reding@...il.com>,
Jonathan Hunter <jonathanh@...dia.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
Subject: [PATCH v2 04/34] ARM: tegra: colibri_t30: add missing regulators
From: Marcel Ziswiler <marcel.ziswiler@...adex.com>
Add missing regulators:
- reg_module_3v3_audio being VDDA supply of SGTL5000
- VDDD supply of SGTL5000 actually being reg_1v8_vio
- reg_lan_v_bus being USB Ethernet chip vbus supply
- carrier board HDMI supply being reg_5v0
- carrier board reg_3v3 actually being backlight and panel power supply
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@...adex.com>
---
Changes in v2: None
arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 10 ++++++++++
arch/arm/boot/dts/tegra30-colibri.dtsi | 21 ++++++++++++++++++++-
2 files changed, 30 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
index 5eb665d89435..1c057b285153 100644
--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -29,6 +29,7 @@
};
hdmi@...80000 {
status = "okay";
+ hdmi-supply = <®_5v0>;
};
};
@@ -127,6 +128,7 @@
default-brightness-level = <6>;
/* BL_ON */
enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+ power-supply = <®_3v3>;
};
clocks {
@@ -159,6 +161,7 @@
compatible = "edt,et057090dhu", "simple-panel";
backlight = <&backlight>;
+ power-supply = <®_3v3>;
};
pwmleds {
@@ -181,6 +184,13 @@
};
};
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V_SW";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
reg_5v0: regulator-5v0 {
compatible = "regulator-fixed";
regulator-name = "5V_SW";
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index 4d7ed25bd594..dc54eb734f64 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -229,7 +229,8 @@
sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- VDDA-supply = <®_module_3v3>;
+ VDDA-supply = <®_module_3v3_audio>;
+ VDDD-supply = <®_1v8_vio>;
VDDIO-supply = <®_module_3v3>;
clocks = <&tegra_car TEGRA30_CLK_EXTERN1>;
};
@@ -442,6 +443,7 @@
usb-phy@...04000 {
status = "okay";
nvidia,is-wired = <1>;
+ vbus-supply = <®_lan_v_bus>;
};
clocks {
@@ -485,6 +487,15 @@
regulator-always-on;
};
+ reg_lan_v_bus: regulator-lan-v-bus {
+ compatible = "regulator-fixed";
+ regulator-name = "LAN_V_BUS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
+ };
+
reg_module_3v3: regulator-module-3v3 {
compatible = "regulator-fixed";
regulator-name = "+V3.3";
@@ -493,6 +504,14 @@
regulator-always-on;
};
+ reg_module_3v3_audio: regulator-module-3v3-audio {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_AUDIO_AVDD_S";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
sound {
compatible = "toradex,tegra-audio-sgtl5000-colibri_t30",
"nvidia,tegra-audio-sgtl5000";
--
2.14.4
Powered by blists - more mailing lists