[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180902100906.25792-17-marcel@ziswiler.com>
Date: Sun, 2 Sep 2018 12:08:45 +0200
From: Marcel Ziswiler <marcel@...wiler.com>
To: devicetree@...r.kernel.org, linux-tegra@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Marcel Ziswiler <marcel.ziswiler@...adex.com>,
Thierry Reding <thierry.reding@...il.com>,
Jonathan Hunter <jonathanh@...dia.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
Subject: [PATCH v2 16/37] ARM: tegra: colibri_t20: iris: display controller rgb panel support
From: Marcel Ziswiler <marcel.ziswiler@...adex.com>
Add display controller parallel RGB panel support incl. backlight PWM.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@...adex.com>
---
Changes in v2: None
arch/arm/boot/dts/tegra20-colibri-iris.dts | 31 ++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/arch/arm/boot/dts/tegra20-colibri-iris.dts b/arch/arm/boot/dts/tegra20-colibri-iris.dts
index 28386b89d910..21713b7ae978 100644
--- a/arch/arm/boot/dts/tegra20-colibri-iris.dts
+++ b/arch/arm/boot/dts/tegra20-colibri-iris.dts
@@ -21,6 +21,13 @@
};
host1x@...00000 {
+ dc@...00000 {
+ rgb {
+ status = "okay";
+ nvidia,panel = <&panel>;
+ };
+ };
+
hdmi@...80000 {
status = "okay";
hdmi-supply = <®_5v0>;
@@ -99,6 +106,10 @@
status = "okay";
};
+ pwm@...0a000 {
+ status = "okay";
+ };
+
/*
* GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
* board)
@@ -149,6 +160,26 @@
no-1-8-v;
};
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ brightness-levels = <255 128 64 32 16 8 4 0>;
+ default-brightness-level = <6>;
+ /* BL_ON */
+ enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>;
+ power-supply = <®_3v3>;
+ pwms = <&pwm 0 5000000>; /* PWM<A> */
+ };
+
+ panel: panel {
+ /*
+ * edt,et057090dhu: EDT 5.7" LCD TFT
+ * edt,et070080dh6: EDT 7.0" LCD TFT
+ */
+ compatible = "edt,et057090dhu", "simple-panel";
+ backlight = <&backlight>;
+ power-supply = <®_3v3>;
+ };
+
reg_3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "3.3V";
--
2.14.4
Powered by blists - more mailing lists