[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180902072643.4917-19-jernej.skrabec@siol.net>
Date: Sun, 2 Sep 2018 09:26:34 +0200
From: Jernej Skrabec <jernej.skrabec@...l.net>
To: robh+dt@...nel.org, maxime.ripard@...tlin.com, wens@...e.org
Cc: mark.rutland@....com, mturquette@...libre.com, sboyd@...nel.org,
airlied@...ux.ie, architt@...eaurora.org, a.hajda@...sung.com,
jernej.skrabec@...l.net, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-clk@...r.kernel.org, dri-devel@...ts.freedesktop.org,
linux-sunxi@...glegroups.com, Icenowy Zheng <icenowy@...c.io>
Subject: [PATCH 18/27] dt-bindings: display: sunxi: add DT binding for Allwinner H6 DW HDMI
From: Icenowy Zheng <icenowy@...c.io>
The Allwinner H6 SoC uses a v2.12a DesignWare HDMI controller, with
dedicated CEC and HDCP clocks added; the PHY connected is a standard
DesignWare HDMI PHY.
Add binding for it.
Signed-off-by: Icenowy Zheng <icenowy@...c.io>
[added HDCP clock and reset]
Signed-off-by: Jernej Skrabec <jernej.skrabec@...l.net>
---
.../devicetree/bindings/display/sunxi/sun4i-drm.txt | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
index dec2f8a6da9c..278410e43940 100644
--- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
+++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
@@ -78,6 +78,7 @@ Required properties:
- compatible: value must be one of:
* "allwinner,sun8i-a83t-dw-hdmi"
+ * "allwinner,sun50i-h6-dw-hdmi"
- reg: base address and size of memory-mapped region
- reg-io-width: See dw_hdmi.txt. Shall be 1.
- interrupts: HDMI interrupt number
@@ -85,9 +86,14 @@ Required properties:
* iahb: the HDMI bus clock
* isfr: the HDMI register clock
* tmds: TMDS clock
+ * cec: HDMI CEC clock (H6 only)
+ * hdcp: HDCP clock (H6 only)
+ * hdcp-bus: HDCP bus clock (H6 only)
- clock-names: the clock names mentioned above
- - resets: phandle to the reset controller
- - reset-names: must be "ctrl"
+ - resets:
+ * ctrl: HDMI controller reset
+ * hdcp: HDCP reset (H6 only)
+ - reset-names: reset names mentioned above
- phys: phandle to the DWC HDMI PHY
- phy-names: must be "phy"
@@ -104,6 +110,7 @@ Required properties:
* allwinner,sun8i-a83t-hdmi-phy
* allwinner,sun8i-h3-hdmi-phy
* allwinner,sun50i-a64-hdmi-phy
+ * allwinner,sun50i-h6-hdmi-phy
- reg: base address and size of memory-mapped region
- clocks: phandles to the clocks feeding the HDMI PHY
* bus: the HDMI PHY interface clock
--
2.18.0
Powered by blists - more mailing lists