lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20180902101800.4165005f@archlinux>
Date:   Sun, 2 Sep 2018 10:18:00 +0100
From:   Jonathan Cameron <jic23@...nel.org>
To:     Afonso Bordado <afonsobordado@....co>
Cc:     knaack.h@....de, lars@...afoo.de, pmeerw@...erw.net,
        linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org
Subject: Re: [PATCH 1/4] iio: gyro: add support for fxas21002c

On Wed, 29 Aug 2018 07:43:48 +0100
Afonso Bordado <afonsobordado@....co> wrote:

> On Mon, 2018-08-27 at 18:08 +0100, Jonathan Cameron wrote:
> > On Sat, 25 Aug 2018 22:19:07 +0100
> > Afonso Bordado <afonsobordado@....co> wrote:
> >   
> > > FXAS21002C is a 3 axis gyroscope with integrated temperature sensor
> > > 
> > > Signed-off-by: Afonso Bordado <afonsobordado@....co>  
> > 
> > Hi,
> > 
> > Driver is pretty clean so only a few minor comments inline.
> > If we were late in a cycle I'd probably just have taken it and fixed
> > up
> > but as we have lots of time and I'm inherently lazy I'll let you do a
> > v2 :)
> > 
> > Good job, thanks!
> > 
> > Jonathan  
> 
> Great!
> 
> 
> > > +
> > > +static const struct regmap_access_table fxas21002c_volatile_table
> > > = {
> > > +	.yes_ranges = fxas21002c_volatile_ranges,
> > > +	.n_yes_ranges = ARRAY_SIZE(fxas21002c_volatile_ranges),
> > > +};
> > > +
> > > +const struct regmap_config fxas21002c_regmap_config = {
> > > +	.reg_bits = 8,
> > > +	.val_bits = 8,
> > > +
> > > +	.max_register = FXAS21002C_REG_CTRL_REG3,
> > > +	// We don't specify a .rd_table because everything is readable  
> > 
> > /* ... */
> > 
> > Please run checkpatch as IIRC it complains about this.  
> 
> I've replaced all instances of C99 comments with ANSI comments.
> However, has Joe Perches mentioned. Checkpatch did not warn me about
> this.
> 
Yup, thanks to Joe for clarifying this I had missed the change.
> 
> > > +
> > > +static int fxas21002c_remove(struct i2c_client *client)
> > > +{
> > > +	struct iio_dev *indio_dev = i2c_get_clientdata(client);
> > > +	struct fxas21002c_data *data = iio_priv(indio_dev);
> > > +
> > > +	iio_device_unregister(indio_dev);
> > > +
> > > +	fxas21002c_set_operating_mode(data, FXAS21002C_OM_STANDBY);  
> > 
> > You could have used the devm_add_action to allow the managed cleanup
> > to handle
> > this and hence gotten rid of the remove function.
> > 
> > (minor suggestion and somewhat a matter of personal taste).  
> 
> I didn't know this existed! Changed in v2.

Nor me until someone used it in a driver a few months back ;)
One of the advantages of doing a lot of review is that you get to see
any new stuff other people use.

Jonathan

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ