linux-kernel - Re: [PATCH 2/2] mmc: tegra: Implement periodic pad calibration

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <CAPDyKFpVaxttnTZPPZFPn4yvQET_=WcA5TyW2rSbyVEeZOuFVw@mail.gmail.com>
Date:   Mon, 3 Sep 2018 08:14:21 +0200
From:   Ulf Hansson <ulf.hansson@...aro.org>
To:     Aapo Vienamo <avienamo@...dia.com>
Cc:     Adrian Hunter <adrian.hunter@...el.com>,
        Thierry Reding <thierry.reding@...il.com>,
        Jonathan Hunter <jonathanh@...dia.com>,
        "linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
        linux-tegra@...r.kernel.org,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 2/2] mmc: tegra: Implement periodic pad calibration

On 20 August 2018 at 11:23, Aapo Vienamo <avienamo@...dia.com> wrote:
> Rerun the pad calibration procedure before sdhci_request() if
> the 100 ms recalibration interval has been exceeded.
>
> Signed-off-by: Aapo Vienamo <avienamo@...dia.com>

Applied for next, thanks!

Kind regards
Uffe

> ---
>  drivers/mmc/host/sdhci-tegra.c | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
> index 94624ec..ef18a0c 100644
> --- a/drivers/mmc/host/sdhci-tegra.c
> +++ b/drivers/mmc/host/sdhci-tegra.c
> @@ -30,6 +30,7 @@
>  #include <linux/mmc/mmc.h>
>  #include <linux/mmc/slot-gpio.h>
>  #include <linux/gpio/consumer.h>
> +#include <linux/ktime.h>
>
>  #include "sdhci-pltfm.h"
>
> @@ -122,6 +123,7 @@ struct sdhci_tegra {
>         struct pinctrl_state *pinctrl_state_1v8;
>
>         struct sdhci_tegra_autocal_offsets autocal_offsets;
> +       ktime_t last_calib;
>
>         u32 default_tap;
>         u32 default_trim;
> @@ -533,6 +535,22 @@ static void tegra_sdhci_parse_pad_autocal_dt(struct sdhci_host *host)
>                 autocal->pull_down_hs400 = autocal->pull_down_1v8;
>  }
>
> +static void tegra_sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
> +{
> +       struct sdhci_host *host = mmc_priv(mmc);
> +       struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +       struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
> +       ktime_t since_calib = ktime_sub(ktime_get(), tegra_host->last_calib);
> +
> +       /* 100 ms calibration interval is specified in the TRM */
> +       if (ktime_to_ms(since_calib) > 100) {
> +               tegra_sdhci_pad_autocalib(host);
> +               tegra_host->last_calib = ktime_get();
> +       }
> +
> +       sdhci_request(mmc, mrq);
> +}
> +
>  static void tegra_sdhci_parse_tap_and_trim(struct sdhci_host *host)
>  {
>         struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> @@ -1014,6 +1032,10 @@ static int sdhci_tegra_probe(struct platform_device *pdev)
>                                 sdhci_tegra_start_signal_voltage_switch;
>         }
>
> +       /* Hook to periodically rerun pad calibration */
> +       if (soc_data->nvquirks & NVQUIRK_HAS_PADCALIB)
> +               host->mmc_host_ops.request = tegra_sdhci_request;
> +
>         host->mmc_host_ops.hs400_enhanced_strobe =
>                         tegra_sdhci_hs400_enhanced_strobe;
>
> --
> 2.7.4
>