linux-kernel - [PATCH v2] firmware: arm_scmi: add a getter for power of performance states

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180903102439.24012-1-quentin.perret@arm.com>
Date:   Mon,  3 Sep 2018 11:24:39 +0100
From:   Quentin Perret <quentin.perret@....com>
To:     sudeep.holla@....com
Cc:     linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        quentin.perret@....com
Subject: [PATCH v2] firmware: arm_scmi: add a getter for power of performance states

The SCMI protocol can be used to get power estimates from firmware
corresponding to each performance state of a device. Although these power
costs are already managed by the SCMI firmware driver, they are not
exposed to any external subsystem yet.

Fix this by adding a new get_power() interface to the exisiting perf_ops
defined for the SCMI protocol.

Signed-off-by: Quentin Perret <quentin.perret@....com>
---
v2: rebased on 4.19-rc2
---
 drivers/firmware/arm_scmi/perf.c | 28 ++++++++++++++++++++++++++++
 include/linux/scmi_protocol.h    |  4 ++++
 2 files changed, 32 insertions(+)

diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c
index 721e6c57beae..272abd2cb3f0 100644
--- a/drivers/firmware/arm_scmi/perf.c
+++ b/drivers/firmware/arm_scmi/perf.c
@@ -421,6 +421,33 @@ static int scmi_dvfs_freq_get(const struct scmi_handle *handle, u32 domain,
 	return ret;
 }
 
+static int scmi_dvfs_power_get(const struct scmi_handle *handle, u32 domain,
+			       unsigned long *freq, unsigned long *power)
+{
+	struct scmi_perf_info *pi = handle->perf_priv;
+	struct perf_dom_info *dom;
+	unsigned long opp_freq;
+	int idx, ret = -EINVAL;
+	struct scmi_opp *opp;
+
+	dom = pi->dom_info + domain;
+	if (!dom)
+		return -EIO;
+
+	for (opp = dom->opp, idx = 0; idx < dom->opp_count; idx++, opp++) {
+		opp_freq = opp->perf * dom->mult_factor;
+		if (opp_freq < *freq)
+			continue;
+
+		*freq = opp_freq;
+		*power = opp->power;
+		ret = 0;
+		break;
+	}
+
+	return ret;
+}
+
 static struct scmi_perf_ops perf_ops = {
 	.limits_set = scmi_perf_limits_set,
 	.limits_get = scmi_perf_limits_get,
@@ -431,6 +458,7 @@ static struct scmi_perf_ops perf_ops = {
 	.device_opps_add = scmi_dvfs_device_opps_add,
 	.freq_set = scmi_dvfs_freq_set,
 	.freq_get = scmi_dvfs_freq_get,
+	.power_get = scmi_dvfs_power_get,
 };
 
 static int scmi_perf_protocol_init(struct scmi_handle *handle)
diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h
index f4c9fc0fc755..2ecbd2c5a249 100644
--- a/include/linux/scmi_protocol.h
+++ b/include/linux/scmi_protocol.h
@@ -91,6 +91,8 @@ struct scmi_clk_ops {
  *	to sustained performance level mapping
  * @freq_get: gets the frequency for a given device using sustained frequency
  *	to sustained performance level mapping
+ * @power_get: gets the power dissipated for a given performance domain at a
+ *      given frequency
  */
 struct scmi_perf_ops {
 	int (*limits_set)(const struct scmi_handle *handle, u32 domain,
@@ -110,6 +112,8 @@ struct scmi_perf_ops {
 			unsigned long rate, bool poll);
 	int (*freq_get)(const struct scmi_handle *handle, u32 domain,
 			unsigned long *rate, bool poll);
+	int (*power_get)(const struct scmi_handle *handle, u32 domain,
+			 unsigned long *rate, unsigned long *power);
 };
 
 /**
-- 
2.17.1