linux-kernel - [PATCH v3 05/10] serial: uartps: Move alias reading higher in probe()

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <56adfce565f2d743d21d80533ce20218514c7466.1535980253.git.michal.simek@xilinx.com>
Date:   Mon,  3 Sep 2018 15:10:53 +0200
From:   Michal Simek <michal.simek@...inx.com>
To:     linux-kernel@...r.kernel.org, monstr@...str.eu,
        gnomes@...rguk.ukuu.org.uk, Alexander Graf <agraf@...e.de>,
        shubhraj@...inx.com, robh@...nel.org
Cc:     Jiri Slaby <jslaby@...e.com>, linux-serial@...r.kernel.org,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        linux-arm-kernel@...ts.infradead.org
Subject: [PATCH v3 05/10] serial: uartps: Move alias reading higher in probe()

This cosmetic change is done only for having next patch much easier to
read. Moving id setup higher in probe is not affecting any usage of this
driver and it also simplify error path.

Signed-off-by: Michal Simek <michal.simek@...inx.com>
---

Changes in v3: None
Changes in v2:
- new patch - it can be sent separately too

 drivers/tty/serial/xilinx_uartps.c | 21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)

diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 5bd2b0607df6..a3e97ccb376d 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1415,6 +1415,16 @@ static int cdns_uart_probe(struct platform_device *pdev)
 	if (!port)
 		return -ENOMEM;
 
+	/* Look for a serialN alias */
+	id = of_alias_get_id(pdev->dev.of_node, "serial");
+	if (id < 0)
+		id = 0;
+
+	if (id >= CDNS_UART_NR_PORTS) {
+		dev_err(&pdev->dev, "Cannot get uart_port structure\n");
+		return -ENODEV;
+	}
+
 	cdns_uart_data->cdns_uart_driver = &cdns_uart_uart_driver;
 
 	match = of_match_node(cdns_uart_of_match, pdev->dev.of_node);
@@ -1476,16 +1486,6 @@ static int cdns_uart_probe(struct platform_device *pdev)
 				&cdns_uart_data->clk_rate_change_nb))
 		dev_warn(&pdev->dev, "Unable to register clock notifier.\n");
 #endif
-	/* Look for a serialN alias */
-	id = of_alias_get_id(pdev->dev.of_node, "serial");
-	if (id < 0)
-		id = 0;
-
-	if (id >= CDNS_UART_NR_PORTS) {
-		dev_err(&pdev->dev, "Cannot get uart_port structure\n");
-		rc = -ENODEV;
-		goto err_out_notif_unreg;
-	}
 
 	/* At this point, we've got an empty uart_port struct, initialize it */
 	spin_lock_init(&port->lock);
@@ -1544,7 +1544,6 @@ static int cdns_uart_probe(struct platform_device *pdev)
 	pm_runtime_disable(&pdev->dev);
 	pm_runtime_set_suspended(&pdev->dev);
 	pm_runtime_dont_use_autosuspend(&pdev->dev);
-err_out_notif_unreg:
 #ifdef CONFIG_COMMON_CLK
 	clk_notifier_unregister(cdns_uart_data->uartclk,
 			&cdns_uart_data->clk_rate_change_nb);
-- 
1.9.1