| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20180905104120.17252-3-ckeepax@opensource.cirrus.com>
Date: Wed, 5 Sep 2018 11:41:18 +0100
From: Charles Keepax <ckeepax@...nsource.cirrus.com>
To: <lee.jones@...aro.org>, <mturquette@...libre.com>,
<sboyd@...nel.org>, <broonie@...nel.org>,
<linus.walleij@...aro.org>, <robh+dt@...nel.org>,
<mark.rutland@....com>
CC: <lgirdwood@...il.com>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <patches@...nsource.cirrus.com>
Subject: [PATCH 3/5] regulator: lochnagar: Add support for the Cirrus Logic Lochnagar
From: Charles Keepax <ckeepax@...nsource.wolfsonmicro.com>
Lochnagar is an evaluation and development board for Cirrus
Logic Smart CODEC and Amp devices. It allows the connection of
most Cirrus Logic devices on mini-cards, as well as allowing
connection of various application processor systems to provide a
full evaluation platform.
The Lochnagar board provides power supplies for the attached
CODEC/Amp device. Currently this driver supports the microphone
supplies and the digital core voltage for the attached
device. There are some additional supplies that will be
added in time but these supplies are sufficient for most
systems/use-cases.
Signed-off-by: Charles Keepax <ckeepax@...nsource.wolfsonmicro.com>
---
drivers/regulator/Kconfig | 7 +
drivers/regulator/Makefile | 1 +
drivers/regulator/lochnagar-regulator.c | 258 ++++++++++++++++++++++++++++++++
3 files changed, 266 insertions(+)
create mode 100644 drivers/regulator/lochnagar-regulator.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 5dbccf5f3037..10c3aa7e4bfd 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -356,6 +356,13 @@ config REGULATOR_LM363X
One boost output voltage is configurable and always on.
Other LDOs are used for the display module.
+config REGULATOR_LOCHNAGAR
+ tristate "Cirrus Logic Lochnagar regulator driver"
+ depends on MFD_LOCHNAGAR
+ help
+ This enables regulator support on the Cirrus Logic Lochnagar audio
+ development board.
+
config REGULATOR_LP3971
tristate "National Semiconductors LP3971 PMIC regulator driver"
depends on I2C
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index bd818ceb7c72..72eaa51cdaf9 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_REGULATOR_HI655X) += hi655x-regulator.o
obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
obj-$(CONFIG_REGULATOR_ISL9305) += isl9305.o
obj-$(CONFIG_REGULATOR_LM363X) += lm363x-regulator.o
+obj-$(CONFIG_REGULATOR_LOCHNAGAR) += lochnagar-regulator.o
obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
obj-$(CONFIG_REGULATOR_LP3972) += lp3972.o
obj-$(CONFIG_REGULATOR_LP872X) += lp872x.o
diff --git a/drivers/regulator/lochnagar-regulator.c b/drivers/regulator/lochnagar-regulator.c
new file mode 100644
index 000000000000..ef571e9fc621
--- /dev/null
+++ b/drivers/regulator/lochnagar-regulator.c
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Lochnagar regulator driver
+ *
+ * Copyright 2017-2018 Cirrus Logic Inc.
+ *
+ * Author: Charles Keepax <ckeepax@...nsource.cirrus.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+
+#include <linux/mfd/lochnagar.h>
+
+static const struct regulator_ops lochnagar_micvdd_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+static const struct regulator_linear_range lochnagar_micvdd_ranges[] = {
+ REGULATOR_LINEAR_RANGE(1000000, 0, 0xC, 50000),
+ REGULATOR_LINEAR_RANGE(1700000, 0xD, 0x1F, 100000),
+};
+
+static int lochnagar_micbias_enable(struct regulator_dev *rdev)
+{
+ struct lochnagar *lochnagar = rdev_get_drvdata(rdev);
+ int ret;
+
+ mutex_lock(&lochnagar->analogue_config_lock);
+
+ ret = regulator_enable_regmap(rdev);
+ if (ret < 0)
+ goto err;
+
+ ret = lochnagar_update_config(lochnagar);
+
+err:
+ mutex_unlock(&lochnagar->analogue_config_lock);
+
+ return ret;
+}
+
+static int lochnagar_micbias_disable(struct regulator_dev *rdev)
+{
+ struct lochnagar *lochnagar = rdev_get_drvdata(rdev);
+ int ret;
+
+ mutex_lock(&lochnagar->analogue_config_lock);
+
+ ret = regulator_disable_regmap(rdev);
+ if (ret < 0)
+ goto err;
+
+ ret = lochnagar_update_config(lochnagar);
+
+err:
+ mutex_unlock(&lochnagar->analogue_config_lock);
+
+ return ret;
+}
+
+static const struct regulator_ops lochnagar_micbias_ops = {
+ .enable = lochnagar_micbias_enable,
+ .disable = lochnagar_micbias_disable,
+ .is_enabled = regulator_is_enabled_regmap,
+};
+
+static const struct regulator_ops lochnagar_vddcore_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+static const struct regulator_linear_range lochnagar_vddcore_ranges[] = {
+ REGULATOR_LINEAR_RANGE(600000, 0x8, 0x41, 12500),
+};
+
+enum lochnagar_regulators {
+ LOCHNAGAR_MICVDD,
+ LOCHNAGAR_MIC1VDD,
+ LOCHNAGAR_MIC2VDD,
+ LOCHNAGAR_VDDCORE,
+};
+
+static int lochnagar_micbias_of_parse(struct device_node *np,
+ const struct regulator_desc *desc,
+ struct regulator_config *config)
+{
+ struct lochnagar *lochnagar = config->driver_data;
+ int shift = (desc->id - LOCHNAGAR_MIC1VDD) *
+ LOCHNAGAR2_P2_MICBIAS_SRC_SHIFT;
+ int mask = LOCHNAGAR2_P1_MICBIAS_SRC_MASK << shift;
+ unsigned int val;
+ int ret;
+
+ ret = of_property_read_u32(np, "cirrus,micbias-input", &val);
+ if (ret >= 0) {
+ mutex_lock(&lochnagar->analogue_config_lock);
+ ret = regmap_update_bits(lochnagar->regmap,
+ LOCHNAGAR2_ANALOGUE_PATH_CTRL2,
+ mask, val << shift);
+ mutex_unlock(&lochnagar->analogue_config_lock);
+ if (ret < 0) {
+ dev_err(lochnagar->dev,
+ "Failed to update micbias source: %d\n", ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static const struct regulator_desc lochnagar_regulators[] = {
+ [LOCHNAGAR_MICVDD] = {
+ .name = "MICVDD",
+ .supply_name = "SYSVDD",
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = 32,
+ .ops = &lochnagar_micvdd_ops,
+
+ .id = LOCHNAGAR_MICVDD,
+ .of_match = of_match_ptr("MICVDD"),
+
+ .enable_reg = LOCHNAGAR2_MICVDD_CTRL1,
+ .enable_mask = LOCHNAGAR2_MICVDD_REG_ENA_MASK,
+ .vsel_reg = LOCHNAGAR2_MICVDD_CTRL2,
+ .vsel_mask = LOCHNAGAR2_MICVDD_VSEL_MASK,
+
+ .linear_ranges = lochnagar_micvdd_ranges,
+ .n_linear_ranges = ARRAY_SIZE(lochnagar_micvdd_ranges),
+
+ .enable_time = 3000,
+ .ramp_delay = 1000,
+
+ .owner = THIS_MODULE,
+ },
+ [LOCHNAGAR_MIC1VDD] = {
+ .name = "MIC1VDD",
+ .supply_name = "MICBIAS1",
+ .type = REGULATOR_VOLTAGE,
+ .ops = &lochnagar_micbias_ops,
+
+ .id = LOCHNAGAR_MIC1VDD,
+ .of_match = of_match_ptr("MIC1VDD"),
+ .of_parse_cb = lochnagar_micbias_of_parse,
+
+ .enable_reg = LOCHNAGAR2_ANALOGUE_PATH_CTRL2,
+ .enable_mask = LOCHNAGAR2_P1_INPUT_BIAS_ENA_MASK,
+
+ .owner = THIS_MODULE,
+ },
+ [LOCHNAGAR_MIC2VDD] = {
+ .name = "MIC2VDD",
+ .supply_name = "MICBIAS2",
+ .type = REGULATOR_VOLTAGE,
+ .ops = &lochnagar_micbias_ops,
+
+ .id = LOCHNAGAR_MIC2VDD,
+ .of_match = of_match_ptr("MIC2VDD"),
+ .of_parse_cb = lochnagar_micbias_of_parse,
+
+ .enable_reg = LOCHNAGAR2_ANALOGUE_PATH_CTRL2,
+ .enable_mask = LOCHNAGAR2_P2_INPUT_BIAS_ENA_MASK,
+
+ .owner = THIS_MODULE,
+ },
+ [LOCHNAGAR_VDDCORE] = {
+ .name = "VDDCORE",
+ .supply_name = "SYSVDD",
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = 57,
+ .ops = &lochnagar_vddcore_ops,
+
+ .id = LOCHNAGAR_VDDCORE,
+ .of_match = of_match_ptr("VDDCORE"),
+
+ .enable_reg = LOCHNAGAR2_VDDCORE_CDC_CTRL1,
+ .enable_mask = LOCHNAGAR2_VDDCORE_CDC_REG_ENA_MASK,
+ .vsel_reg = LOCHNAGAR2_VDDCORE_CDC_CTRL2,
+ .vsel_mask = LOCHNAGAR2_VDDCORE_CDC_VSEL_MASK,
+
+ .linear_ranges = lochnagar_vddcore_ranges,
+ .n_linear_ranges = ARRAY_SIZE(lochnagar_vddcore_ranges),
+
+ .enable_time = 3000,
+ .ramp_delay = 1000,
+
+ .owner = THIS_MODULE,
+ },
+};
+
+static int lochnagar_regulator_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct lochnagar *lochnagar = dev_get_drvdata(dev->parent);
+ struct regulator_config config = { };
+ struct regulator_dev *rdev;
+ int ret, i;
+
+ config.dev = lochnagar->dev;
+ config.regmap = lochnagar->regmap;
+ config.driver_data = lochnagar;
+
+ for (i = 0; i < ARRAY_SIZE(lochnagar_regulators); i++) {
+ const struct regulator_desc *desc = &lochnagar_regulators[i];
+
+ rdev = devm_regulator_register(dev, desc, &config);
+ if (IS_ERR(rdev)) {
+ ret = PTR_ERR(rdev);
+ dev_err(dev, "Failed to register %s regulator: %d\n",
+ desc->name, ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static struct platform_driver lochnagar_regulator_driver = {
+ .driver = {
+ .name = "lochnagar-regulator",
+ },
+
+ .probe = lochnagar_regulator_probe,
+};
+module_platform_driver(lochnagar_regulator_driver);
+
+MODULE_AUTHOR("Charles Keepax <ckeepax@...nsource.cirrus.com>");
+MODULE_DESCRIPTION("Regulator driver for Cirrus Logic Lochnagar Board");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:lochnagar-regulator");
--
2.11.0
Powered by blists - more mailing lists