| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <059de1cc-e964-6976-15c6-bfb3385e1fcf@gmail.com>
Date: Wed, 5 Sep 2018 21:14:38 +0200
From: Jacek Anaszewski <jacek.anaszewski@...il.com>
To: Baolin Wang <baolin.wang@...aro.org>, pavel@....cz
Cc: rteysseyre@...il.com, bjorn.andersson@...aro.org,
broonie@...nel.org, linus.walleij@...aro.org,
linux-leds@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v9 2/2] leds: sc27xx: Add pattern_set/clear interfaces for
LED controller
Hi Baolin,
Thanks for the v9.
On 09/05/2018 09:20 AM, Baolin Wang wrote:
> This patch implements the 'pattern_set'and 'pattern_clear'
> interfaces to support SC27XX LED breathing mode.
>
> Signed-off-by: Baolin Wang <baolin.wang@...aro.org>
> ---
> Changes from v8:
> - Optimize the ABI documentation file.
>
> Changes from v7:
> - Add its own ABI documentation file.
>
> Changes from v6:
> - None.
>
> Changes from v5:
> - None.
>
> Changes from v4:
> - None.
>
> Changes from v3:
> - None.
>
> Changes from v2:
> - None.
>
> Changes from v1:
> - Remove pattern_get interface.
> ---
> .../ABI/testing/sysfs-class-led-driver-sc27xx | 20 +++++
> drivers/leds/leds-sc27xx-bltc.c | 93 ++++++++++++++++++++
> 2 files changed, 113 insertions(+)
> create mode 100644 Documentation/ABI/testing/sysfs-class-led-driver-sc27xx
>
> diff --git a/Documentation/ABI/testing/sysfs-class-led-driver-sc27xx b/Documentation/ABI/testing/sysfs-class-led-driver-sc27xx
> new file mode 100644
> index 0000000..391ca6e
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-class-led-driver-sc27xx
> @@ -0,0 +1,20 @@
> +What: /sys/class/leds/<led>/hw_pattern
> +Date: September 2018
> +KernelVersion: 4.20
> +Description:
> + Specify a hardware pattern for the SC27XX LED. For the SC27XX
> + LED controller, it only supports 4 stages to make a single
> + hardware pattern, which is used to configure the rise time,
> + high time, fall time and low time for the breathing mode.
> +
> + For the breathing mode, the SC27XX LED only expects one brightness
> + for the high stage. To be compatible with the hardware pattern
> + format, we should set brightness as 0 for rise stage, fall
> + stage and low stage.
> +
> + Min stage duration: 1
> + Max stage duration: 255
> + Stage duration step: 125 ms
It seems that min and max stage duration are given in device
specific levels in contrary to the step which is given in ms.
Please keep it consistent. If I'm getting it right then duration
constraints should be given as follows:
Min stage duration: 125 ms
Max stage duration: 31875 ms
> +
> + Thus the format of the hardware pattern values should be:
> + "0 rise_duration brightness high_duration 0 fall_duration 0 low_duration".
> diff --git a/drivers/leds/leds-sc27xx-bltc.c b/drivers/leds/leds-sc27xx-bltc.c
> index 9d9b7aa..bff2f8f 100644
> --- a/drivers/leds/leds-sc27xx-bltc.c
> +++ b/drivers/leds/leds-sc27xx-bltc.c
> @@ -32,8 +32,13 @@
> #define SC27XX_DUTY_MASK GENMASK(15, 0)
> #define SC27XX_MOD_MASK GENMASK(7, 0)
>
> +#define SC27XX_CURVE_SHIFT 8
> +#define SC27XX_CURVE_L_MASK GENMASK(7, 0)
> +#define SC27XX_CURVE_H_MASK GENMASK(15, 8)
> +
> #define SC27XX_LEDS_OFFSET 0x10
> #define SC27XX_LEDS_MAX 3
> +#define SC27XX_LEDS_PATTERN_CNT 4
>
> struct sc27xx_led {
> char name[LED_MAX_NAME_SIZE];
> @@ -122,6 +127,90 @@ static int sc27xx_led_set(struct led_classdev *ldev, enum led_brightness value)
> return err;
> }
>
> +static int sc27xx_led_pattern_clear(struct led_classdev *ldev)
> +{
> + struct sc27xx_led *leds = to_sc27xx_led(ldev);
> + struct regmap *regmap = leds->priv->regmap;
> + u32 base = sc27xx_led_get_offset(leds);
> + u32 ctrl_base = leds->priv->base + SC27XX_LEDS_CTRL;
> + u8 ctrl_shift = SC27XX_CTRL_SHIFT * leds->line;
> + int err;
> +
> + mutex_lock(&leds->priv->lock);
> +
> + /* Reset the rise, high, fall and low time to zero. */
> + regmap_write(regmap, base + SC27XX_LEDS_CURVE0, 0);
> + regmap_write(regmap, base + SC27XX_LEDS_CURVE1, 0);
> +
> + err = regmap_update_bits(regmap, ctrl_base,
> + (SC27XX_LED_RUN | SC27XX_LED_TYPE) << ctrl_shift, 0);
What is the LED brightness after executing the above?
Is it the pattern high stage brightness?
Or maybe it is LED_OFF?
We should update LED class device brightness accordingly.
If it is set to LED_OFF then we should update LED class device
brightness here:
led->ldev.brightness = LED_OFF;
> + mutex_unlock(&leds->priv->lock);
> +
> + return err;
> +}
> +
> +static int sc27xx_led_pattern_set(struct led_classdev *ldev,
> + struct led_pattern *pattern,
> + int len, u32 repeat)
> +{
> + struct sc27xx_led *leds = to_sc27xx_led(ldev);
> + u32 base = sc27xx_led_get_offset(leds);
> + u32 ctrl_base = leds->priv->base + SC27XX_LEDS_CTRL;
> + u8 ctrl_shift = SC27XX_CTRL_SHIFT * leds->line;
> + struct regmap *regmap = leds->priv->regmap;
> + int err;
> +
> + /*
> + * Must contain 4 patterns to configure the rise time, high time, fall
> + * time and low time to enable the breathing mode.
> + */
> + if (len != SC27XX_LEDS_PATTERN_CNT)
> + return -EINVAL;
> +
> + mutex_lock(&leds->priv->lock);
> +
> + err = regmap_update_bits(regmap, base + SC27XX_LEDS_CURVE0,
> + SC27XX_CURVE_L_MASK, pattern[0].delta_t);
> + if (err)
> + goto out;
> +
> + err = regmap_update_bits(regmap, base + SC27XX_LEDS_CURVE1,
> + SC27XX_CURVE_L_MASK, pattern[1].delta_t);
> + if (err)
> + goto out;
> +
> + err = regmap_update_bits(regmap, base + SC27XX_LEDS_CURVE0,
> + SC27XX_CURVE_H_MASK,
> + pattern[2].delta_t << SC27XX_CURVE_SHIFT);
> + if (err)
> + goto out;
> +
> +
> + err = regmap_update_bits(regmap, base + SC27XX_LEDS_CURVE1,
> + SC27XX_CURVE_H_MASK,
> + pattern[3].delta_t << SC27XX_CURVE_SHIFT);
> + if (err)
> + goto out;
> +
> + err = regmap_update_bits(regmap, base + SC27XX_LEDS_DUTY,
> + SC27XX_DUTY_MASK,
> + (pattern[1].brightness << SC27XX_DUTY_SHIFT) |
> + SC27XX_MOD_MASK);
Continuing the reasoning from my comment to pattern_clear() above -
if old brightness is not brought back after clearing the pattern,
then we should set it to high stage brightness here, to keep the
brightness level reported by the sysfs at least somehow consistent
with the pattern:
led->ldev.brightness = pattern[1].brightness;
> + if (err)
> + goto out;
> +
> + /* Enable the LED breathing mode */
> + err = regmap_update_bits(regmap, ctrl_base,
> + SC27XX_LED_RUN << ctrl_shift,
> + SC27XX_LED_RUN << ctrl_shift);
> +
> +out:
> + mutex_unlock(&leds->priv->lock);
> +
> + return err;
> +}
> +
> static int sc27xx_led_register(struct device *dev, struct sc27xx_led_priv *priv)
> {
> int i, err;
> @@ -140,6 +229,9 @@ static int sc27xx_led_register(struct device *dev, struct sc27xx_led_priv *priv)
> led->priv = priv;
> led->ldev.name = led->name;
> led->ldev.brightness_set_blocking = sc27xx_led_set;
> + led->ldev.pattern_set = sc27xx_led_pattern_set;
> + led->ldev.pattern_clear = sc27xx_led_pattern_clear;
> + led->ldev.default_trigger = "pattern";
>
> err = devm_led_classdev_register(dev, &led->ldev);
> if (err)
> @@ -241,4 +333,5 @@ static int sc27xx_led_remove(struct platform_device *pdev)
>
> MODULE_DESCRIPTION("Spreadtrum SC27xx breathing light controller driver");
> MODULE_AUTHOR("Xiaotong Lu <xiaotong.lu@...eadtrum.com>");
> +MODULE_AUTHOR("Baolin Wang <baolin.wang@...aro.org>");
> MODULE_LICENSE("GPL v2");
>
--
Best regards,
Jacek Anaszewski
Powered by blists - more mailing lists