| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20180905201146.261438-1-dianders@chromium.org>
Date: Wed, 5 Sep 2018 13:11:46 -0700
From: Douglas Anderson <dianders@...omium.org>
To: gregkh@...uxfoundation.org
Cc: linux-arm-msm@...r.kernel.org, mka@...omium.org,
evgreen@...omium.org, swboyd@...omium.org,
Douglas Anderson <dianders@...omium.org>,
linux-kernel@...r.kernel.org, linux-serial@...r.kernel.org,
Jiri Slaby <jslaby@...e.com>
Subject: [PATCH] tty: serial: qcom_geni_serial: Fix serial when not used as console
If you've got the "console" serial port setup to use just as a UART
(AKA there is no "console=ttyMSMX" on the kernel command line) then
certain initialization is skipped. When userspace later tries to do
something with the port then things go boom (specifically, on my
system, some sort of exception hit that caused the system to reboot
itself w/ no error messages).
Let's cleanup / refactor the init so that we always run the same init
code regardless of whether we're using the console.
To make this work, we make rely on qcom_geni_serial_pm doing its job
to turn resources on.
For the record, here is a trace of the order of things (after this
patch) when console= is specified on the command line and we have an
agetty on the port:
qcom_geni_serial_pm: 4 (undefined) => 0 (on)
qcom_geni_console_setup
qcom_geni_serial_port_setup
qcom_geni_serial_console_write
qcom_geni_serial_startup
qcom_geni_serial_start_tx
...and here is the order of things (after this patch) when console= is
_NOT_ specified on the command line and we have an agetty port:
qcom_geni_serial_pm: 4 => 0
qcom_geni_serial_pm: 0 => 3
qcom_geni_serial_pm: 3 => 0
qcom_geni_serial_startup
qcom_geni_serial_port_setup
qcom_geni_serial_pm: 0 => 3
qcom_geni_serial_pm: 3 => 0
qcom_geni_serial_startup
qcom_geni_serial_start_tx
Fixes: c4f528795d1a ("tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP")
Signed-off-by: Douglas Anderson <dianders@...omium.org>
---
drivers/tty/serial/qcom_geni_serial.c | 55 +++++++++++++--------------
1 file changed, 26 insertions(+), 29 deletions(-)
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 29ec34387246..99103c67e1dc 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -851,6 +851,23 @@ static int qcom_geni_serial_port_setup(struct uart_port *uport)
{
struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
unsigned int rxstale = DEFAULT_BITS_PER_CHAR * STALE_TIMEOUT;
+ u32 proto;
+
+ if (uart_console(uport))
+ port->tx_bytes_pw = 1;
+ else
+ port->tx_bytes_pw = 4;
+ port->rx_bytes_pw = RX_BYTES_PW;
+
+ proto = geni_se_read_proto(&port->se);
+ if (proto != GENI_SE_UART) {
+ dev_err(uport->dev, "Invalid FW loaded, proto: %d\n", proto);
+ return -ENXIO;
+ }
+
+ qcom_geni_serial_stop_rx(uport);
+
+ get_tx_fifo_size(port);
set_rfr_wm(port);
writel_relaxed(rxstale, uport->membase + SE_UART_RX_STALE_CNT);
@@ -874,30 +891,19 @@ static int qcom_geni_serial_port_setup(struct uart_port *uport)
return -ENOMEM;
}
port->setup = true;
+
return 0;
}
static int qcom_geni_serial_startup(struct uart_port *uport)
{
int ret;
- u32 proto;
struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
scnprintf(port->name, sizeof(port->name),
"qcom_serial_%s%d",
(uart_console(uport) ? "console" : "uart"), uport->line);
- if (!uart_console(uport)) {
- port->tx_bytes_pw = 4;
- port->rx_bytes_pw = RX_BYTES_PW;
- }
- proto = geni_se_read_proto(&port->se);
- if (proto != GENI_SE_UART) {
- dev_err(uport->dev, "Invalid FW loaded, proto: %d\n", proto);
- return -ENXIO;
- }
-
- get_tx_fifo_size(port);
if (!port->setup) {
ret = qcom_geni_serial_port_setup(uport);
if (ret)
@@ -1056,6 +1062,7 @@ static int __init qcom_geni_console_setup(struct console *co, char *options)
int bits = 8;
int parity = 'n';
int flow = 'n';
+ int ret;
if (co->index >= GENI_UART_CONS_PORTS || co->index < 0)
return -ENXIO;
@@ -1071,21 +1078,10 @@ static int __init qcom_geni_console_setup(struct console *co, char *options)
if (unlikely(!uport->membase))
return -ENXIO;
- if (geni_se_resources_on(&port->se)) {
- dev_err(port->se.dev, "Error turning on resources\n");
- return -ENXIO;
- }
-
- if (unlikely(geni_se_read_proto(&port->se) != GENI_SE_UART)) {
- geni_se_resources_off(&port->se);
- return -ENXIO;
- }
-
if (!port->setup) {
- port->tx_bytes_pw = 1;
- port->rx_bytes_pw = RX_BYTES_PW;
- qcom_geni_serial_stop_rx(uport);
- qcom_geni_serial_port_setup(uport);
+ ret = qcom_geni_serial_port_setup(uport);
+ if (ret)
+ return ret;
}
if (options)
@@ -1203,11 +1199,12 @@ static void qcom_geni_serial_pm(struct uart_port *uport,
{
struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
+ /* If we've never been called, treat it as off */
+ if (old_state == UART_PM_STATE_UNDEFINED)
+ old_state = UART_PM_STATE_OFF;
+
if (new_state == UART_PM_STATE_ON && old_state == UART_PM_STATE_OFF)
geni_se_resources_on(&port->se);
- else if (!uart_console(uport) && (new_state == UART_PM_STATE_ON &&
- old_state == UART_PM_STATE_UNDEFINED))
- geni_se_resources_on(&port->se);
else if (new_state == UART_PM_STATE_OFF &&
old_state == UART_PM_STATE_ON)
geni_se_resources_off(&port->se);
--
2.19.0.rc1.350.ge57e33dbd1-goog
Powered by blists - more mailing lists