[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180906021254.GC29405@guoren-Inspiron-7460>
Date: Thu, 6 Sep 2018 10:12:54 +0800
From: Guo Ren <ren_guo@...ky.com>
To: Rob Herring <robh@...nel.org>
Cc: linux-arch@...r.kernel.org,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Thomas Gleixner <tglx@...utronix.de>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Jason Cooper <jason@...edaemon.net>,
Arnd Bergmann <arnd@...db.de>, c-sky_gcc_upstream@...ky.com,
gnu-csky@...tor.com, thomas.petazzoni@...tlin.com,
wbx@...ibc-ng.org, Greentime Hu <green.hu@...il.com>
Subject: Re: [PATCH V3 21/26] dt-bindings: interrupt-controller: C-SKY APB
intc
On Wed, Sep 05, 2018 at 07:43:10PM -0500, Rob Herring wrote:
> On Wed, Sep 5, 2018 at 7:10 AM Guo Ren <ren_guo@...ky.com> wrote:
> >
> > Signed-off-by: Guo Ren <ren_guo@...ky.com>
> > ---
> > .../interrupt-controller/csky,apb-intc.txt | 45 ++++++++++++++++++++++
> > 1 file changed, 45 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.txt
> >
> > diff --git a/Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.txt
> > new file mode 100644
> > index 0000000..faa482c
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.txt
> > @@ -0,0 +1,45 @@
> > +==============================
> > +C-SKY APB Interrupt Controller
> > +==============================
> > +
> > +C-SKY APB Interrupt Controller is a simple soc interrupt controller
> > +on the apb bus and we only use it as root irq controller.
> > +
> > + - csky,apb-intc is used in a lot of csky fpgas and socs, it support 64 irq nums.
> > + - csky,dual-apb-intc consists of 2 apb-intc and 128 irq nums supported.
>
> Can't this be described in DT as 2 csky,apb-intc nodes?
In detail, dual-apb-intc is not the same as two apb-intc, so I still want to name them
separately, so I will keep this and it is clearer.
> > + - compatible
> > + Usage: required
> > + Value type: <string>
> > + Definition: must be "csky,apb-intc"
> > + "csky,dual-apb-intc"
> > + "csky,gx6605s-intc"
> > + - interrupt-cells
>
> #interrupt-cells
Yes, I forgot #.
- #interrupt-cells
> > + Usage: required
> > + Value type: <u32>
> > + Definition: must be <1>
>
> No edge or level configuration?
No, also no support in hardware.
> > +
> > + intc: interrupt-controller {
>
> Needs a unit-address.
Ok, change it to:
intc: interrupt-controller@...0500000 {
Guo Ren
Powered by blists - more mailing lists