| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20180907103450.13890-3-benjamin.tissoires@redhat.com>
Date: Fri, 7 Sep 2018 12:34:45 +0200
From: Benjamin Tissoires <benjamin.tissoires@...hat.com>
To: Jiri Kosina <jikos@...nel.org>,
Nestor Lopez Casado <nlopezcasad@...itech.com>,
Simon Wood <simon@...gewell.org>,
Olivier Gay <ogay@...itech.com>
Cc: linux-input@...r.kernel.org, linux-kernel@...r.kernel.org,
Benjamin Tissoires <benjamin.tissoires@...hat.com>
Subject: [PATCH 2/7] HID: logitech-hidpp: make .probe usbhid capable
The current custom solution for the G920 is not the best because
hid_hw_start() is not called at the end of the .probe().
It means that any configuration retrieved after the initial hid_hw_start
would not be exposed to user space without races.
We can simply force hid_hw_start to just enable the transport layer by
not using a connect_mask. This way, we can have a common path between
USB, Unifying and Bluetooth devices.
Tested with a M185 with the non unifying receiver, a T650 and many other
unifying devices, and the T651 over Bluetooth.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@...hat.com>
---
drivers/hid/hid-ids.h | 2 +
drivers/hid/hid-logitech-hidpp.c | 85 +++++++++++++++++++++-------------------
2 files changed, 47 insertions(+), 40 deletions(-)
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index e254ae802688..537223086d6b 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -741,7 +741,9 @@
#define USB_DEVICE_ID_LOGITECH_CORDLESS_DESKTOP_LX500 0xc512
#define USB_DEVICE_ID_MX3000_RECEIVER 0xc513
#define USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER 0xc52b
+#define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER 0xc52f
#define USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER_2 0xc532
+#define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_2 0xc534
#define USB_DEVICE_ID_SPACETRAVELLER 0xc623
#define USB_DEVICE_ID_SPACENAVIGATOR 0xc626
#define USB_DEVICE_ID_DINOVO_DESKTOP 0xc704
diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index 37abae63bb1a..d635e9685581 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -3268,24 +3268,23 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
hid_warn(hdev, "Cannot allocate sysfs group for %s\n",
hdev->name);
- if (hidpp->quirks & HIDPP_QUIRK_NO_HIDINPUT)
- connect_mask &= ~HID_CONNECT_HIDINPUT;
-
- if (hidpp->quirks & HIDPP_QUIRK_CLASS_G920) {
- ret = hid_hw_start(hdev, connect_mask);
- if (ret) {
- hid_err(hdev, "hw start failed\n");
- goto hid_hw_start_fail;
- }
- ret = hid_hw_open(hdev);
- if (ret < 0) {
- dev_err(&hdev->dev, "%s:hid_hw_open returned error:%d\n",
- __func__, ret);
- hid_hw_stop(hdev);
- goto hid_hw_start_fail;
- }
+ /*
+ * Plain USB connections need to actually call start and open
+ * on the transport driver to allow incoming data.
+ */
+ ret = hid_hw_start(hdev, 0);
+ if (ret) {
+ hid_err(hdev, "hw start failed\n");
+ goto hid_hw_start_fail;
}
+ ret = hid_hw_open(hdev);
+ if (ret < 0) {
+ dev_err(&hdev->dev, "%s:hid_hw_open returned error:%d\n",
+ __func__, ret);
+ hid_hw_stop(hdev);
+ goto hid_hw_open_fail;
+ }
/* Allow incoming packets */
hid_device_io_start(hdev);
@@ -3299,7 +3298,7 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
if (!connected) {
ret = -ENODEV;
hid_err(hdev, "Device not connected");
- goto hid_hw_open_failed;
+ goto hid_hw_init_fail;
}
hid_info(hdev, "HID++ %u.%u device connected.\n",
@@ -3311,37 +3310,36 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
if (connected && (hidpp->quirks & HIDPP_QUIRK_CLASS_WTP)) {
ret = wtp_get_config(hidpp);
if (ret)
- goto hid_hw_open_failed;
+ goto hid_hw_init_fail;
} else if (connected && (hidpp->quirks & HIDPP_QUIRK_CLASS_G920)) {
ret = g920_get_config(hidpp);
if (ret)
- goto hid_hw_open_failed;
+ goto hid_hw_init_fail;
}
- /* Block incoming packets */
- hid_device_io_stop(hdev);
+ hidpp_connect_event(hidpp);
- if (!(hidpp->quirks & HIDPP_QUIRK_CLASS_G920)) {
- ret = hid_hw_start(hdev, connect_mask);
- if (ret) {
- hid_err(hdev, "%s:hid_hw_start returned error\n", __func__);
- goto hid_hw_start_fail;
- }
- }
+ /* Reset the HID node state */
+ hid_device_io_stop(hdev);
+ hid_hw_close(hdev);
+ hid_hw_stop(hdev);
- /* Allow incoming packets */
- hid_device_io_start(hdev);
+ if (hidpp->quirks & HIDPP_QUIRK_NO_HIDINPUT)
+ connect_mask &= ~HID_CONNECT_HIDINPUT;
- hidpp_connect_event(hidpp);
+ /* Now export the actual inputs and hidraw nodes to the world */
+ ret = hid_hw_start(hdev, connect_mask);
+ if (ret) {
+ hid_err(hdev, "%s:hid_hw_start returned error\n", __func__);
+ goto hid_hw_start_fail;
+ }
return ret;
-hid_hw_open_failed:
- hid_device_io_stop(hdev);
- if (hidpp->quirks & HIDPP_QUIRK_CLASS_G920) {
- hid_hw_close(hdev);
- hid_hw_stop(hdev);
- }
+hid_hw_init_fail:
+ hid_hw_close(hdev);
+hid_hw_open_fail:
+ hid_hw_stop(hdev);
hid_hw_start_fail:
sysfs_remove_group(&hdev->dev.kobj, &ps_attribute_group);
cancel_work_sync(&hidpp->work);
@@ -3360,10 +3358,9 @@ static void hidpp_remove(struct hid_device *hdev)
sysfs_remove_group(&hdev->dev.kobj, &ps_attribute_group);
- if (hidpp->quirks & HIDPP_QUIRK_CLASS_G920) {
+ if (hidpp->quirks & HIDPP_QUIRK_CLASS_G920)
hidpp_ff_deinit(hdev);
- hid_hw_close(hdev);
- }
+
hid_hw_stop(hdev);
cancel_work_sync(&hidpp->work);
mutex_destroy(&hidpp->send_mutex);
@@ -3427,6 +3424,14 @@ static const struct hid_device_id hidpp_devices[] = {
{ LDJ_DEVICE(HID_ANY_ID) },
+ { /* Logitech Nano (non DJ) receiver */
+ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
+ USB_DEVICE_ID_LOGITECH_NANO_RECEIVER) },
+
+ { /* Logitech Nano (non DJ) receiver */
+ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
+ USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_2) },
+
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G920_WHEEL),
.driver_data = HIDPP_QUIRK_CLASS_G920 | HIDPP_QUIRK_FORCE_OUTPUT_REPORTS},
{}
--
2.14.3
Powered by blists - more mailing lists