[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1536327489-22005-1-git-send-email-eugen.hristev@microchip.com>
Date: Fri, 7 Sep 2018 16:38:09 +0300
From: Eugen Hristev <eugen.hristev@...rochip.com>
To: <alexandre.belloni@...tlin.com>, <nicolas.ferre@...rochip.com>,
<ludovic.desroches@...rochip.com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
CC: Eugen Hristev <eugen.hristev@...rochip.com>
Subject: [PATCH] ARM: dts: at91: sama5d4: add labels to soc dtsi for derivative boards
This adds labels to commonly used device-tree nodes so that derivative
boards can avoid ahb/apb hierarchy.
Signed-off-by: Eugen Hristev <eugen.hristev@...rochip.com>
---
Hello,
This was already done for SoC sama5d3 and sam9x5, in commit:
"fc37204432d" ("ARM: dts: at91: add labels to soc dtsi for derivative boards")
This commit will do basically the same thing for sama5d4 SoC.
Based on top of at91-next branch of at91.git
Thanks.
arch/arm/boot/dts/sama5d4.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 92a35a1..7371f2a 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -1323,13 +1323,13 @@
};
};
- rstc@...68600 {
+ reset_controller: rstc@...68600 {
compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
reg = <0xfc068600 0x10>;
clocks = <&clk32k>;
};
- shdwc@...68610 {
+ shutdown_controller: shdwc@...68610 {
compatible = "atmel,at91sam9x5-shdwc";
reg = <0xfc068610 0x10>;
clocks = <&clk32k>;
@@ -1342,7 +1342,7 @@
clocks = <&h32ck>;
};
- watchdog@...68640 {
+ watchdog: watchdog@...68640 {
compatible = "atmel,sama5d4-wdt";
reg = <0xfc068640 0x10>;
interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -1376,7 +1376,7 @@
};
- pinctrl@...6a000 {
+ pinctrl: pinctrl@...6a000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";
--
2.7.4
Powered by blists - more mailing lists