| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 10 Sep 2018 15:12:24 -0500
From: Rob Herring <robh@...nel.org>
To: Nava kishore Manne <nava.manne@...inx.com>
Cc: mark.rutland@....com, michal.simek@...inx.com,
p.zabel@...gutronix.de, rajanv@...inx.com, jollys@...inx.com,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: Re: [RFC PATCH v3 2/3] dt-bindings: reset: Add bindings for ZynqMP
reset driver
On Wed, Sep 05, 2018 at 12:39:01PM +0530, Nava kishore Manne wrote:
> Add documentation to describe Xilinx ZynqMP reset driver
> bindings.
>
> Signed-off-by: Nava kishore Manne <nava.manne@...inx.com>
> ---
> Changes for v3:
> -Corrected Commit Msg.
> Changes for v2:
> -Moved reset node as a child to firwmare
> node.
Why? There's no reason for that. The parent can be multiple providers.
You only need child nodes if the sub functions have their own DT
resources.
>
> .../firmware/xilinx/xlnx,zynqmp-firmware.txt | 142 +++++++++++++++++++++
> 1 file changed, 142 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
> index 1b431d9..351b1bb 100644
> --- a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
> +++ b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
> @@ -17,6 +17,144 @@ Required properties:
> - "smc" : SMC #0, following the SMCCC
> - "hvc" : HVC #0, following the SMCCC
>
> +--------------------------------------------------------------------------
> + = Zynq UltraScale+ MPSoC reset driver binding =
> +--------------------------------------------------------------------------
> +The Zynq UltraScale+ MPSoC has several different resets.
> +
> +See Chapter 36 of the Zynq UltraScale+ MPSoC TRM (UG) for more information
> +about zynqmp resets.
> +
> +Please also refer to reset.txt in this directory for common reset
> +controller binding usage.
> +
> +Required Properties:
> +- compatible: "xlnx,zynqmp-reset"
> +- #reset-cells: Specifies the number of cells needed to encode reset
> + line, should be 1
> +
> +Reset outputs:
> + 0 :PCIE config reset.
> + 1 :PCIE bridge block level reset (AXI interface).
> + 2 :PCIE control block level,reset.
> + 3 :Display Port block level reset (includes DPDMA).
> + 4 :FPD WDT reset.
> + 5 :AF_FM5 block level reset.
> + 6 :AF_FM4 block level reset.
> + 7 :AF_FM3 block level reset.
> + 8 :AF_FM2 block level reset.
> + 9 :AF_FM1 block level reset.
> + 10 :AF_FM0 block level reset.
> + 11 :GDMA block level reset.
> + 12 :Pixel Processor (GPU_PP1) block level reset.
> + 13 :Pixel Processor (GPU_PP0) block level reset.
> + 14 :GPU block level reset.
> + 15 :GT block level reset.
> + 16 :Sata block level reset.
> + 17 :ACPU3 power on reset.
> + 18 :ACPU2 power on reset.
> + 19 :ACPU1 power on reset.
> + 20 :ACPU0 power on reset.
> + 21 :APU L2 reset.
> + 22 :ACPU3 reset.
> + 23 :ACPU2 reset.
> + 24 :ACPU1 reset.
> + 25 :ACPU0 reset.
> + 26 :DDR block level reset inside of the DDR Sub System.
> + 27 :APM block level reset inside of the DDR Sub System.
> + 28 :soft reset.
> + 29 :GEM 0 reset.
> + 30 :GEM 1 reset.
> + 31 :GEM 2 reset.
> + 32 :GEM 3 reset.
> + 33 :qspi reset.
> + 34 :uart0 reset.
> + 35 :uart1 reset.
> + 36 :spi0 reset.
> + 37 :spi1 reset.
> + 38 :sdio0 reset.
> + 39 :sdio1 reset.
> + 40 :can0 reset.
> + 41 :can1 reset.
> + 42 :i2c0 reset.
> + 43 :i2c1 reset.
> + 44 :ttc0 reset.
> + 45 :ttc1 reset.
> + 46 :ttc2 reset.
> + 47 :ttc3 reset.
> + 48 :swdt reset.
> + 49 :nand reset.
> + 50 :adma reset.
> + 51 :gpio reset.
> + 52 :iou_cc reset.
> + 53 :timestamp reset.
> + 54 :rpu_r50 reset.
> + 55 :rpu r51 reset.
> + 56 :rpu_amba reset.
> + 57 :ocm reset.
> + 58 :rpu_pge reset.
> + 59 :usb0_core reset.
> + 60 :usb1_core reset.
> + 61 :usb0_hiber reset.
> + 62 :usb1_hiber reset.
> + 63 :usb0_apb reset.
> + 64 :usb1_apb reset.
> + 65 :ipi reset.
> + 66 :apm reset.
> + 67 :rtc reset.
> + 68 :sysmon reset.
> + 69 :afi_fm6 reset.
> + 70 :lpd_swdt reset.
> + 71 :fpd_reset.
> + 72 :rpu_dbg1 reset.
> + 73 :rpu_dbg0 reset.
> + 74 :dbg_lpd reset.
> + 75 :dbg_fpd reset.
> + 76 :apll reset.
> + 77 :dpll reset.
> + 78 :vpll reset.
> + 79 :iopll reset.
> + 80 :rpll reset.
> + 81 :gpio_pl_0 reset.
> + 82 :gpio_pl_1 reset.
> + 83 :gpio_pl_2 reset.
> + 84 :gpio_pl_3 reset.
> + 85 :gpio_pl_4 reset.
> + 86 :gpio_pl_5 reset.
> + 87 :gpio_pl_6 reset.
> + 88 :gpio_pl_7 reset.
> + 89 :gpio_pl_8 reset.
> + 90 :gpio_pl_9 reset.
> + 91 :gpio_pl_10 reset.
> + 92 :gpio_pl_11 reset.
> + 93 :gpio_pl_12 reset.
> + 94 :gpio_pl_13 reset.
> + 95 :gpio_pl_14 reset.
> + 96 :gpio_pl_15 reset.
> + 97 :gpio_pl_16 reset.
> + 98 :gpio_pl_17 reset.
> + 99 :gpio_pl_18 reset.
> + 100 :gpio_pl_19 reset.
> + 101 :gpio_pl_20 reset.
> + 102 :gpio_pl_21 reset.
> + 103 :gpio_pl_22 reset.
> + 104 :gpio_pl_23 reset.
> + 105 :gpio_pl_24 reset.
> + 106 :gpio_pl_25 reset.
> + 107 :gpio_pl_26 reset.
> + 108 :gpio_pl_27 reset.
> + 109 :gpio_pl_28 reset.
> + 110 :gpio_pl_29 reset.
> + 111 :gpio_pl_30 reset.
> + 112 :gpio_pl_31 reset.
> + 113 :rpu_ls reset.
> + 114 :ps_only reset.
> + 115 :pl reset.
> + 116 :ps_pl0 reset
> + 117 :ps_pl1 reset
> + 118 :ps_pl2 reset
> + 119 :ps_pl3 reset
> +
> -------
> Example
> -------
> @@ -25,5 +163,9 @@ firmware {
> zynqmp_firmware: zynqmp-firmware {
> compatible = "xlnx,zynqmp-firmware";
> method = "smc";
> + reset-controller:reset-controller@0 {
> + compatible = "xlnx,zynqmp-reset";
> + #reset-cells = <1>;
> + };
> };
> };
> --
> 2.7.4
>
Powered by blists - more mailing lists