[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180910171550.5659-1-horia.geanta@nxp.com>
Date: Mon, 10 Sep 2018 20:15:39 +0300
From: Horia Geantă <horia.geanta@....com>
To: Herbert Xu <herbert@...dor.apana.org.au>,
Stuart Yoder <stuyoder@...il.com>,
Laurentiu Tudor <laurentiu.tudor@....com>,
Li Yang <leoyang.li@....com>, Roy Pledge <roy.pledge@....com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>
Cc: "David S . Miller" <davem@...emloft.net>,
Aymen Sghaier <aymen.sghaier@....com>,
linux-crypto@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 00/11] crypto: caam - add DPAA2 (DPSECI) driver
Hi,
This patch set adds the CAAM crypto engine driver for DPAA2
(Data Path Acceleration Architecture v2) found on ARMv8-based SoCs
like LS1088A, LS2088A, LX2160A.
Previously sent RFC can be found here:
https://www.mail-archive.com/linux-crypto@vger.kernel.org/msg27290.html
Driver consists of:
-DPSECI (Data Path SEC Interface) backend - low-level API that allows
to manage DPSECI devices (DPAA2 objects) that sit on
the Management Complex (MC) fsl-mc bus
-algorithms frontend - AEAD, skcipher and ahash algorithms implementation
Patches 1-4 are fsl-mc bus and DPIO dependencies.
Stuart, Laurentiu, Leo, Roy, please review the patches and let me know
if you have anything against going with them through the cryptodev tree.
Patches 5-10 are the core of the patch set, adding the driver.
For symmetric encryption the new skcipher interface is used.
Patch 11 enables driver on arm64. It will be built only if dependency
on DPIO (CONFIG_FSL_MC_DPIO) is satisfied.
Note: multiple modprobe/rmmod won't work without the following patches
[5/7,v7] bus/fsl-mc: support dma configure for devices on fsl-mc bus
https://patchwork.kernel.org/patch/10594179
[7/7,v7] arm64: dts: ls208xa: comply with the iommu map binding for fsl_mc
https://patchwork.kernel.org/patch/10594171
(for LS1088A a similar DT update is needed)
Thanks,
Horia
Horia Geantă (11):
bus: fsl-mc: add support for dpseci device type
Revert "staging: fsl-mc/dpio: remove couple of unused functions"
soc: fsl: dpio: add frame list format support
soc: fsl: dpio: add congestion notification support
crypto: caam - add DPAA2-CAAM (DPSECI) backend API
crypto: caam - add Queue Interface v2 error codes
crypto: caam/qi2 - add DPAA2-CAAM driver
crypto: caam/qi2 - add skcipher algorithms
crypto: caam - export ahash shared descriptor generation
crypto: caam/qi2 - add support for ahash algorithms
arm64: defconfig: enable CAAM crypto engine on QorIQ DPAA2 SoCs
arch/arm64/configs/defconfig | 1 +
drivers/bus/fsl-mc/fsl-mc-bus.c | 5 +
drivers/crypto/Makefile | 2 +-
drivers/crypto/caam/Kconfig | 55 +-
drivers/crypto/caam/Makefile | 10 +-
drivers/crypto/caam/caamalg_qi2.c | 5165 +++++++++++++++++++++++++++++++++++
drivers/crypto/caam/caamalg_qi2.h | 223 ++
drivers/crypto/caam/caamhash.c | 79 +-
drivers/crypto/caam/caamhash_desc.c | 80 +
drivers/crypto/caam/caamhash_desc.h | 21 +
drivers/crypto/caam/compat.h | 1 +
drivers/crypto/caam/dpseci.c | 426 +++
drivers/crypto/caam/dpseci.h | 333 +++
drivers/crypto/caam/dpseci_cmd.h | 149 +
drivers/crypto/caam/error.c | 79 +-
drivers/crypto/caam/error.h | 6 +-
drivers/crypto/caam/regs.h | 2 +
drivers/soc/fsl/dpio/dpio-service.c | 58 +
include/linux/fsl/mc.h | 6 +
include/soc/fsl/dpaa2-fd.h | 242 ++
include/soc/fsl/dpaa2-global.h | 15 +
include/soc/fsl/dpaa2-io.h | 4 +
22 files changed, 6871 insertions(+), 91 deletions(-)
create mode 100644 drivers/crypto/caam/caamalg_qi2.c
create mode 100644 drivers/crypto/caam/caamalg_qi2.h
create mode 100644 drivers/crypto/caam/caamhash_desc.c
create mode 100644 drivers/crypto/caam/caamhash_desc.h
create mode 100644 drivers/crypto/caam/dpseci.c
create mode 100644 drivers/crypto/caam/dpseci.h
create mode 100644 drivers/crypto/caam/dpseci_cmd.h
--
2.16.2
Powered by blists - more mailing lists