linux-kernel - [PATCH v1 3/7] dt-bindings: stm32-mdma: Add DMA/MDMA chaining support bindings

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1536650820-16076-4-git-send-email-pierre-yves.mordret@st.com>
Date:   Tue, 11 Sep 2018 09:26:56 +0200
From:   Pierre-Yves MORDRET <pierre-yves.mordret@...com>
To:     Vinod Koul <vkoul@...nel.org>, Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Alexandre Torgue <alexandre.torgue@...com>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        Dan Williams <dan.j.williams@...el.com>,
        <devicetree@...r.kernel.org>, <dmaengine@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>
CC:     Pierre-Yves MORDRET <pierre-yves.mordret@...com>
Subject: [PATCH v1 3/7] dt-bindings: stm32-mdma: Add DMA/MDMA chaining support bindings

This patch adds the description of the 2 properties needed to support M2M
transfer triggered by STM32 DMA when his transfer is complete.

Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@...com>
---
  Version history:
    v1:
       * Initial
---
---
 .../devicetree/bindings/dma/stm32-mdma.txt         | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

diff --git a/Documentation/devicetree/bindings/dma/stm32-mdma.txt b/Documentation/devicetree/bindings/dma/stm32-mdma.txt
index d18772d..1810f87 100644
--- a/Documentation/devicetree/bindings/dma/stm32-mdma.txt
+++ b/Documentation/devicetree/bindings/dma/stm32-mdma.txt
@@ -10,7 +10,7 @@ Required properties:
 - interrupts: Should contain the MDMA interrupt.
 - clocks: Should contain the input clock of the DMA instance.
 - resets: Reference to a reset controller asserting the DMA controller.
-- #dma-cells : Must be <5>. See DMA client paragraph for more details.
+- #dma-cells : Must be <6>. See DMA client paragraph for more details.
 
 Optional properties:
 - dma-channels: Number of DMA channels supported by the controller.
@@ -26,7 +26,7 @@ Example:
 		interrupts = <122>;
 		clocks = <&timer_clk>;
 		resets = <&rcc 992>;
-		#dma-cells = <5>;
+		#dma-cells = <6>;
 		dma-channels = <16>;
 		dma-requests = <32>;
 		st,ahb-addr-masks = <0x20000000>, <0x00000000>;
@@ -35,8 +35,8 @@ Example:
 * DMA client
 
 DMA clients connected to the STM32 MDMA controller must use the format
-described in the dma.txt file, using a five-cell specifier for each channel:
-a phandle to the MDMA controller plus the following five integer cells:
+described in the dma.txt file, using a six-cell specifier for each channel:
+a phandle to the MDMA controller plus the following six integer cells:
 
 1. The request line number
 2. The priority level
@@ -76,19 +76,23 @@ a phandle to the MDMA controller plus the following five integer cells:
    if no HW ack signal is used by the MDMA client
 5. A 32bit mask specifying the value to be written to acknowledge the request
    if no HW ack signal is used by the MDMA client
+6. A bitfield value specifying if the MDMA client wants to generate M2M
+   transfer with HW trigger (1) or not (0). This bitfield should be only
+   enabled for M2M transfer triggered by STM32 DMA client. The memory devices
+   involved in this kind of transfer are SRAM and DDR.
 
 Example:
 
 	i2c4: i2c@...02000 {
 		compatible = "st,stm32f7-i2c";
 		reg = <0x5c002000 0x400>;
-		interrupts = <95>,
-			     <96>;
-		clocks = <&timer_clk>;
+		interrupts = <GIC_SPI 95 IRQ_TYPE_NONE>,
+			     <GIC_SPI 96 IRQ_TYPE_NONE>;
+		clocks = <&clk_hsi>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		dmas = <&mdma1 36 0x0 0x40008 0x0 0x0>,
-		       <&mdma1 37 0x0 0x40002 0x0 0x0>;
+		dmas = <&mdma1 36 0x0 0x40008 0x0 0x0 0>,
+		       <&mdma1 37 0x0 0x40002 0x0 0x0 0>;
 		dma-names = "rx", "tx";
 		status = "disabled";
 	};
-- 
2.7.4