| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <55ba3b50499f4369b334b70d977fab22@SFHDAG7NODE2.st.com>
Date: Tue, 11 Sep 2018 07:30:54 +0000
From: Loic PALLARDY <loic.pallardy@...com>
To: Jiaying Liang <jliang@...inx.com>,
"ohad@...ery.com" <ohad@...ery.com>,
"bjorn.andersson@...aro.org" <bjorn.andersson@...aro.org>,
Michal Simek <michals@...inx.com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"mark.rutland@....com" <mark.rutland@....com>,
Rajan Vaja <RAJANV@...inx.com>, Jolly Shah <JOLLYS@...inx.com>
CC: "linux-remoteproc@...r.kernel.org" <linux-remoteproc@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH 6/7] remoteproc: Add Xilinx ZynqMP R5 remoteproc
> -----Original Message-----
> From: Jiaying Liang <jliang@...inx.com>
> Sent: Tuesday, September 11, 2018 12:10 AM
> To: Loic PALLARDY <loic.pallardy@...com>; ohad@...ery.com;
> bjorn.andersson@...aro.org; Michal Simek <michals@...inx.com>;
> robh+dt@...nel.org; mark.rutland@....com; Rajan Vaja
> <RAJANV@...inx.com>; Jolly Shah <JOLLYS@...inx.com>
> Cc: linux-remoteproc@...r.kernel.org; linux-arm-
> kernel@...ts.infradead.org; devicetree@...r.kernel.org; linux-
> kernel@...r.kernel.org
> Subject: RE: [PATCH 6/7] remoteproc: Add Xilinx ZynqMP R5 remoteproc
>
>
>
> > -----Original Message-----
> > From: Loic PALLARDY [mailto:loic.pallardy@...com]
> > Sent: Monday, September 10, 2018 1:25 PM
> > To: Jiaying Liang <jliang@...inx.com>; ohad@...ery.com;
> > bjorn.andersson@...aro.org; Michal Simek <michals@...inx.com>;
> > robh+dt@...nel.org; mark.rutland@....com; Rajan Vaja
> > <RAJANV@...inx.com>; Jolly Shah <JOLLYS@...inx.com>
> > Cc: linux-remoteproc@...r.kernel.org; linux-arm-
> kernel@...ts.infradead.org;
> > devicetree@...r.kernel.org; linux-kernel@...r.kernel.org; Jiaying Liang
> > <jliang@...inx.com>
> > Subject: RE: [PATCH 6/7] remoteproc: Add Xilinx ZynqMP R5 remoteproc
> >
> > Hi Wendy,
> > Please find below few comments.
> >
> > > -----Original Message-----
> > > From: linux-remoteproc-owner@...r.kernel.org <linux-remoteproc-
> > > owner@...r.kernel.org> On Behalf Of Wendy Liang
> > > Sent: Thursday, August 16, 2018 9:06 AM
> > > To: ohad@...ery.com; bjorn.andersson@...aro.org;
> > > michal.simek@...inx.com; robh+dt@...nel.org; mark.rutland@....com;
> > > rajan.vaja@...inx.com; jollys@...inx.com
> > > Cc: linux-remoteproc@...r.kernel.org; linux-arm-
> > > kernel@...ts.infradead.org; devicetree@...r.kernel.org; linux-
> > > kernel@...r.kernel.org; Wendy Liang <jliang@...inx.com>
> > > Subject: [PATCH 6/7] remoteproc: Add Xilinx ZynqMP R5 remoteproc
> > >
> > > There are cortex-r5 processors in Xilinx Zynq UltraScale+ MPSoC
> > > platforms. This remoteproc driver is to manage the
> > > R5 processors.
> > >
> > > Signed-off-by: Wendy Liang <jliang@...inx.com>
> >
> > Jason Wu' signed-off-by missing as he is mentioned as author of this
> driver?
> [Wendy] He was the one who wrote the init version of the driver.
> But he left the company a few years ago. In this case, maybe I should remove
> Module author.
As you want, but look strange for a new driver that author is not in CC or signed-off.
Maybe you are the main author now...
> >
> > > ---
> > > drivers/remoteproc/Kconfig | 9 +
> > > drivers/remoteproc/Makefile | 1 +
> > > drivers/remoteproc/zynqmp_r5_remoteproc.c | 692
> > > ++++++++++++++++++++++++++++++
> > > 3 files changed, 702 insertions(+)
> > > create mode 100644 drivers/remoteproc/zynqmp_r5_remoteproc.c
> > >
> > > diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
> > > index cd1c168..83aac63 100644
> > > --- a/drivers/remoteproc/Kconfig
> > > +++ b/drivers/remoteproc/Kconfig
> > > @@ -158,6 +158,15 @@ config ST_REMOTEPROC config
> > ST_SLIM_REMOTEPROC
> > > tristate
> > >
> > > +config ZYNQMP_R5_REMOTEPROC
> > > + tristate "ZynqMP_r5 remoteproc support"
> > > + depends on ARM64 && PM && ARCH_ZYNQMP
> > > + select RPMSG_VIRTIO
> > > + select ZYNQMP_FIRMWARE
> > > + help
> > > + Say y here to support ZynqMP R5 remote processors via the remote
> > > + processor framework.
> > > +
> > > endif # REMOTEPROC
> > >
> > > endmenu
> > > diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
> > > index 02627ed..147923c 100644
> > > --- a/drivers/remoteproc/Makefile
> > > +++ b/drivers/remoteproc/Makefile
> > > @@ -23,3 +23,4 @@ qcom_wcnss_pil-y +=
> > > qcom_wcnss.o
> > > qcom_wcnss_pil-y += qcom_wcnss_iris.o
> > > obj-$(CONFIG_ST_REMOTEPROC) += st_remoteproc.o
> > > obj-$(CONFIG_ST_SLIM_REMOTEPROC) += st_slim_rproc.o
> > > +obj-$(CONFIG_ZYNQMP_R5_REMOTEPROC) +=
> zynqmp_r5_remoteproc.o
> > > diff --git a/drivers/remoteproc/zynqmp_r5_remoteproc.c
> > > b/drivers/remoteproc/zynqmp_r5_remoteproc.c
> > > new file mode 100644
> > > index 0000000..7fc3718
> > > --- /dev/null
> > > +++ b/drivers/remoteproc/zynqmp_r5_remoteproc.c
> > > @@ -0,0 +1,692 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> > > +/*
> > > + * Zynq R5 Remote Processor driver
> > > + *
> > > + * Copyright (C) 2015 Xilinx, Inc.
> > > + *
> > > + */
> > > +
> > > +#include <linux/kernel.h>
> > > +#include <linux/module.h>
> > > +#include <linux/err.h>
> > > +#include <linux/platform_device.h>
> > > +#include <linux/dma-mapping.h>
> > > +#include <linux/remoteproc.h>
> > > +#include <linux/interrupt.h>
> > > +#include <linux/of_address.h>
> > > +#include <linux/of_irq.h>
> > > +#include <linux/of_platform.h>
> > > +#include <linux/of_reserved_mem.h>
> > > +#include <linux/slab.h>
> > > +#include <linux/cpu.h>
> > > +#include <linux/delay.h>
> > > +#include <linux/list.h>
> > > +#include <linux/genalloc.h>
> > > +#include <linux/pfn.h>
> > > +#include <linux/idr.h>
> > > +#include <linux/firmware/xlnx-zynqmp.h>
> >
> > Includes to be classified in alphabetical order
> [Wendy] Will do in the next version
> >
> > > +
> > > +#include "remoteproc_internal.h"
> > > +
> > > +/* IPI reg offsets */
> > > +#define TRIG_OFFSET 0x00000000
> > > +#define OBS_OFFSET 0x00000004
> > > +#define ISR_OFFSET 0x00000010
> > > +#define IMR_OFFSET 0x00000014
> > > +#define IER_OFFSET 0x00000018
> > > +#define IDR_OFFSET 0x0000001C
> > > +#define IPI_ALL_MASK 0x0F0F0301
> > > +
> > > +/* RPU IPI mask */
> > > +#define RPU_IPI_INIT_MASK 0x00000100
> > > +#define RPU_IPI_MASK(n) (RPU_IPI_INIT_MASK << (n))
> > > +#define RPU_0_IPI_MASK RPU_IPI_MASK(0)
> > > +#define RPU_1_IPI_MASK RPU_IPI_MASK(1)
> > > +
> > > +/* PM proc states */
> > > +#define PM_PROC_STATE_ACTIVE 1u
> > > +
> > > +/* Maximum TCM power nodes IDs */
> > > +#define MAX_TCM_PNODES 4
> > > +
> > > +/* Register access macros */
> > > +#define reg_read(base, reg) \
> > > + readl(((void __iomem *)(base)) + (reg)) #define reg_write(base, reg,
> > > +val) \
> > > + writel((val), ((void __iomem *)(base)) + (reg))
> > > +
> > > +#define DEFAULT_FIRMWARE_NAME "rproc-rpu-fw"
> > > +
> > > +static bool autoboot __read_mostly;
> > > +
> > > +struct zynqmp_r5_rproc_pdata;
> >
> > This definition is not needed as complete definition just below.
> [Wendy] Will remove in the next version
> > > +
> > > +/**
> > > + * struct zynqmp_r5_rproc_pdata - zynqmp rpu remote processor
> > > +instance
> > > state
> > > + * @rproc: rproc handle
> > > + * @workqueue: workqueue for the RPU remoteproc
> > > + * @ipi_base: virt ptr to IPI channel address registers for APU
> > > + * @rpu_mode: RPU core configuration
> > > + * @rpu_id: RPU CPU id
> > > + * @rpu_pnode_id: RPU CPU power domain id
> > > + * @mem_pools: list of gen_pool for firmware mmio_sram memory and
> > > their
> > > + * power domain IDs
> > > + * @mems: list of rproc_mem_entries for firmware
> > > + * @irq: IRQ number
> > > + * @ipi_dest_mask: IPI destination mask for the IPI channel */
> > > +struct zynqmp_r5_rproc_pdata {
> > > + struct rproc *rproc;
> > > + struct work_struct workqueue;
> > > + void __iomem *ipi_base;
> > > + enum rpu_oper_mode rpu_mode;
> > > + struct list_head mems;
> > > + u32 ipi_dest_mask;
> > > + u32 rpu_id;
> > > + u32 rpu_pnode_id;
> > > + int irq;
> > > + u32 tcm_pnode_id[MAX_TCM_PNODES];
> > > +};
> > > +
> > > +/**
> > > + * r5_boot_addr_config - configure the boot address of R5
> > > + * @pdata: platform data
> > > + * @bootmem: boot from LOVEC or HIVEC
> > > + *
> > > + * This function will set the RPU boot address */ static void
> > > +r5_boot_addr_config(struct zynqmp_r5_rproc_pdata *pdata,
> > > + enum rpu_boot_mem bootmem)
> > > +{
> > > + const struct zynqmp_eemi_ops *eemi =
> > > zynqmp_pm_get_eemi_ops();
> > > +
> > > + pr_debug("%s: R5 ID: %d, boot_dev %d\n",
> > > + __func__, pdata->rpu_id, bootmem);
> > > +
> > > + if (!eemi || !eemi->ioctl) {
> > > + pr_err("%s: no eemi ioctl operation.\n", __func__);
> > > + return;
> > > + }
> > > + eemi->ioctl(pdata->rpu_pnode_id,
> > > IOCTL_RPU_BOOT_ADDR_CONFIG,
> > > + bootmem, 0, NULL);
> > > +}
> > > +
> > > +/**
> > > + * r5_mode_config - configure R5 operation mode
> > > + * @pdata: platform data
> > > + *
> > > + * configure R5 to split mode or lockstep mode
> > > + * based on the platform data.
> > > + */
> > > +static void r5_mode_config(struct zynqmp_r5_rproc_pdata *pdata) {
> > > + const struct zynqmp_eemi_ops *eemi =
> > > zynqmp_pm_get_eemi_ops();
> > > +
> > > + pr_debug("%s: mode: %d\n", __func__, pdata->rpu_mode);
> > > +
> > > + if (!eemi || !eemi->ioctl) {
> > > + pr_err("%s: no eemi ioctl operation.\n", __func__);
> > > + return;
> > > + }
> > > + eemi->ioctl(pdata->rpu_pnode_id, IOCTL_SET_RPU_OPER_MODE,
> > > + pdata->rpu_mode, 0, NULL);
> > > +}
> > > +
> > > +/**
> > > + * r5_release_tcm() - release TCM
> > > + * @pdata: platform data
> > > + *
> > > + * Release TCM
> > > + */
> > > +static void r5_release_tcm(struct zynqmp_r5_rproc_pdata *pdata) {
> > > + const struct zynqmp_eemi_ops *eemi =
> > > zynqmp_pm_get_eemi_ops();
> > > + int i;
> > > +
> > > + if (!eemi || !eemi->release_node) {
> > > + pr_err("Failed to release TCM\n");
> > > + return;
> > > + }
> > > +
> > > + for (i = 0; i < MAX_TCM_PNODES; i++) {
> > > + if (pdata->tcm_pnode_id[i] != 0)
> > > + eemi->release_node(pdata->tcm_pnode_id[i]);
> > > + }
> > > +}
> > > +
> > > +/**
> > > + * disable_ipi - disable IPI
> > > + * @pdata: platform data
> > > + *
> > > + * Disable IPI interrupt
> > > + */
> > > +static inline void disable_ipi(struct zynqmp_r5_rproc_pdata *pdata) {
> > > + /* Disable R5 IPI interrupt */
> > > + if (pdata->ipi_base)
> > > + reg_write(pdata->ipi_base, IDR_OFFSET, pdata-
> > > >ipi_dest_mask);
> > > +}
> >
> > All IPI functions should go below mailbox framework as you use it as a
> > doorbell.
> [Wendy] There is another patch for IPI driver. There are discussions on how
> the mailbox
> Driver should be implemented. I directly access the IPI here is to see if I can
> upstream this
> Remoteproc driver independent to the mailbox driver. I can update this
> driver after the
> Mailbox driver is upstreamed.
In that case upstream first r5 support without RPMsg. That means you will be able to load, start and stop your coprocessor but not establish RPMsg link.
Then once IPI mailbox upstreamed, add kick and notify functions for virtio_rpmsg support.
Doesn't make sense to upstream temporary code like this one.
> >
> > > +
> > > +/**
> > > + * enable_ipi - enable IPI
> > > + * @pdata: platform data
> > > + *
> > > + * Enable IPI interrupt
> > > + */
> > > +static inline void enable_ipi(struct zynqmp_r5_rproc_pdata *pdata) {
> > > + /* Enable R5 IPI interrupt */
> > > + if (pdata->ipi_base)
> > > + reg_write(pdata->ipi_base, IER_OFFSET, pdata-
> > > >ipi_dest_mask);
> > > +}
> > > +
> > > +/**
> > > + * event_notified_idr_cb - event notified idr callback
> > > + * @id: idr id
> > > + * @ptr: pointer to idr private data
> > > + * @data: data passed to idr_for_each callback
> > > + *
> > > + * Pass notification to remoteproc virtio
> > > + *
> > > + * @return: 0. having return is to satisfy the idr_for_each() function
> > > + * pointer input argument requirement.
> > > + */
> > > +static int event_notified_idr_cb(int id, void *ptr, void *data) {
> > > + struct rproc *rproc = data;
> > > +
> > > + (void)rproc_vq_interrupt(rproc, id);
> > > + return 0;
> > > +}
> > > +
> > > +static void handle_event_notified(struct work_struct *work) {
> > > + struct rproc *rproc;
> > > + struct zynqmp_r5_rproc_pdata *local;
> > > +
> > > + local = container_of(work, struct zynqmp_r5_rproc_pdata,
> > > workqueue);
> > > + rproc = local->rproc;
> > > + idr_for_each(&rproc->notifyids, event_notified_idr_cb, rproc); }
> > > +
> > > +static int zynqmp_r5_rproc_start(struct rproc *rproc) {
> > > + struct device *dev = rproc->dev.parent;
> > > + struct zynqmp_r5_rproc_pdata *local = rproc->priv;
> > > + enum rpu_boot_mem bootmem;
> > > + const struct zynqmp_eemi_ops *eemi =
> > > zynqmp_pm_get_eemi_ops();
> > > +
> > > + dev_dbg(dev, "%s\n", __func__);
> > > +
> > > + if (!eemi || !eemi->force_powerdown ||
> > > + !eemi->request_wakeup) {
> > > + pr_err("Failed to start R5\n");
> > > + return -ENXIO;
> > > + }
> > > +
> > > + /* Set up R5 */
> > > + if ((rproc->bootaddr & 0xF0000000) == 0xF0000000)
> > > + bootmem = PM_RPU_BOOTMEM_HIVEC;
> > > + else
> > > + bootmem = PM_RPU_BOOTMEM_LOVEC;
> > > + dev_info(dev, "RPU boot from %s.",
> > > + bootmem == PM_RPU_BOOTMEM_HIVEC ? "OCM" :
> > > "TCM");
> > > +
> > > + r5_mode_config(local);
> > > + eemi->force_powerdown(local->rpu_pnode_id,
> > > + ZYNQMP_PM_REQUEST_ACK_BLOCKING);
> > > + r5_boot_addr_config(local, bootmem);
> >
> > Add some blank line to ease code reading. Some parts of the code are too
> > compacted.
> Will do in the next version.
> >
> > > + /* Add delay before release from halt and reset */
> > > + usleep_range(400, 500);
> > > + eemi->request_wakeup(local->rpu_pnode_id,
> > > + 1, bootmem,
> > > + ZYNQMP_PM_REQUEST_ACK_NO);
> > > +
> > > + /* Make sure IPI is enabled */
> > > + enable_ipi(local);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +/* kick a firmware */
> > > +static void zynqmp_r5_rproc_kick(struct rproc *rproc, int vqid) {
> > > + struct device *dev = rproc->dev.parent;
> > > + struct zynqmp_r5_rproc_pdata *local = rproc->priv;
> > > +
> > > + dev_dbg(dev, "KICK Firmware to start send messages vqid %d\n",
> > > vqid);
> > > +
> > > + /*
> > > + * send irq to R5 firmware
> > > + * Currently vqid is not used because we only got one.
> > > + */
> > > + if (local->ipi_base)
> > > + reg_write(local->ipi_base, TRIG_OFFSET, local-
> > > >ipi_dest_mask);
> > > +}
> > > +
> > > +/* power off the remote processor */
> > > +static int zynqmp_r5_rproc_stop(struct rproc *rproc) {
> > > + struct device *dev = rproc->dev.parent;
> > > + struct zynqmp_r5_rproc_pdata *local = rproc->priv;
> > > + struct rproc_mem_entry *mem, *nmem;
> > > + const struct zynqmp_eemi_ops *eemi =
> > > zynqmp_pm_get_eemi_ops();
> >
> > Is it pointer on secure interface to control coprocessor?
> > As it is used in most of functions, maybe ops could be recovered and
> > checked only once at probe time?
> I will do the checking at probe time. And fails probing if it is not there.
> >
> > > +
> > > + dev_dbg(dev, "%s\n", __func__);
> > > +
> > > + if (!eemi || !eemi->force_powerdown) {
> > > + pr_err("Failed to stop R5\n");
> > > + return -ENXIO;
> > > + }
> > > +
> > > + disable_ipi(local);
> > > + eemi->force_powerdown(local->rpu_pnode_id,
> > > + ZYNQMP_PM_REQUEST_ACK_BLOCKING);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static void *zynqmp_r5_rproc_da_to_va(struct rproc *rproc, u64 da,
> > > +int len) {
> > > + struct rproc_mem_entry *mem;
> > > + void *va = NULL;
> > > + struct zynqmp_r5_rproc_pdata *local = rproc->priv;
> > > +
> > > + list_for_each_entry(mem, &local->mems, node) {
> > > + int offset = da - mem->da;
> > > +
> > > + /* try next carveout if da is too small */
> > > + if (offset < 0)
> > > + continue;
> > > +
> > > + /* try next carveout if da is too large */
> > > + if (offset + len > mem->len)
> > > + continue;
> > > +
> > > + va = mem->va + offset;
> > > +
> > > + break;
> > > + }
> > > + return va;
> > > +}
> > > +
> > > +static int zynqmp_r5_parse_fw(struct rproc *rproc, const struct
> > > +firmware
> > > *fw)
> > > +{
> > > + int ret;
> > > +
> > > + ret = rproc_elf_load_rsc_table(rproc, fw);
> > > + if (ret == -EINVAL)
> > > + /* No resource table */
> > > + return 0;
> > > + else
> > > + return ret;
> > > +}
> > > +
> > > +static struct rproc_ops zynqmp_r5_rproc_ops = {
> > > + .start = zynqmp_r5_rproc_start,
> > > + .stop = zynqmp_r5_rproc_stop,
> > > + .kick = zynqmp_r5_rproc_kick,
> > > + .da_to_va = zynqmp_r5_rproc_da_to_va,
> > > +};
> > > +
> > > +/* Release R5 from reset and make it halted.
> > > + * In case the firmware uses TCM, in order to load firmware to TCM,
> > > + * will need to release R5 from reset and stay in halted state.
> > > + */
> > > +static int zynqmp_r5_rproc_init(struct rproc *rproc) {
> > > + struct device *dev = rproc->dev.parent;
> > > + struct zynqmp_r5_rproc_pdata *local = rproc->priv;
> > > +
> > > + dev_dbg(dev, "%s\n", __func__);
> > > + enable_ipi(local);
> > > + return 0;
> > > +}
> >
> > Comment not aligned with function content. Only IPI enable here.
> Will fix the comments in the next version.
> > > +
> > > +static irqreturn_t r5_remoteproc_interrupt(int irq, void *dev_id) {
> > > + struct device *dev = dev_id;
> > > + struct platform_device *pdev = to_platform_device(dev);
> > > + struct rproc *rproc = platform_get_drvdata(pdev);
> > > + struct zynqmp_r5_rproc_pdata *local = rproc->priv;
> > > + u32 ipi_reg;
> > > +
> > > + /* Check if there is a kick from R5 */
> > > + ipi_reg = reg_read(local->ipi_base, ISR_OFFSET);
> > > + if (!(ipi_reg & local->ipi_dest_mask))
> > > + return IRQ_NONE;
> > > +
> > > + dev_dbg(dev, "KICK Linux because of pending message(irq%d)\n",
> > > irq);
> > > + reg_write(local->ipi_base, ISR_OFFSET, local->ipi_dest_mask);
> > > + schedule_work(&local->workqueue);
> > > +
> > > + return IRQ_HANDLED;
> > > +}
> >
> > Should be part of IPI mailbox driver.
> [Wendy] the IPI mailbox driver patches are under discussion. I am trying to
> upstream
> this driver independent to the mailbox driver. I can update this driver after
> the
> Mailbox driver is upstreamed.
>
> >
> > > +
> > > +/* zynqmp_r5_get_tcm_memories() - get tcm memories
> > > + * @pdev: pointer to the platform device
> > > + * @pdata: pointer to the remoteproc private data
> > > + *
> > > + * Function to create remoteproc memory entries for TCM memories.
> > > + */
> > > +static int zynqmp_r5_get_tcms(struct platform_device *pdev,
> > > + struct zynqmp_r5_rproc_pdata *pdata) {
> > > + static const char * const mem_names[] = {"tcm_a", "tcm_b"};
> > > + struct device *dev = &pdev->dev;
> > > + struct device_node *np = dev->of_node;
> > > + int num_mems = 0;
> > > + int i, ret;
> > > + struct property *prop;
> > > + const __be32 *cur;
> > > + u32 val;
> > > + const struct zynqmp_eemi_ops *eemi =
> > > zynqmp_pm_get_eemi_ops();
> > > +
> > > + /* Get TCM power node ids */
> > > + i = 0;
> > > + of_property_for_each_u32(np, "tcm-pnode-id", prop, cur, val)
> > > + pdata->tcm_pnode_id[i++] = val;
> > > +
> > > + /* Request TCMs */
> > > + for (i = 0; i < MAX_TCM_PNODES; i++) {
> > > + if (pdata->tcm_pnode_id[i] != 0) {
> > > + ret = eemi->request_node(pdata->tcm_pnode_id[i],
> > > +
> > > ZYNQMP_PM_CAPABILITY_ACCESS, 0,
> > > +
> > > ZYNQMP_PM_REQUEST_ACK_BLOCKING
> > > + );
> > > + if (ret < 0) {
> > > + dev_err(dev, "failed to request TCM: %u\n",
> > > + pdata->tcm_pnode_id[i]);
> > > + return ret;
> > > + }
> > > + dev_dbg(dev, "request tcm pnode: %u\n",
> > > + pdata->tcm_pnode_id[i]);
> > > + } else {
> > > + break;
> > > + }
> > > + }
> > > + /* Create remoteproc memories entries for TCM memories */
> > > + num_mems = ARRAY_SIZE(mem_names);
> > > + for (i = 0; i < num_mems; i++) {
> > > + struct resource *res;
> > > + struct rproc_mem_entry *mem;
> > > + dma_addr_t dma;
> > > + resource_size_t size;
> > > +
> > > + res = platform_get_resource_byname(pdev,
> > > IORESOURCE_MEM,
> > > + mem_names[i]);
> > > + mem = devm_kzalloc(dev, sizeof(struct rproc_mem_entry),
> > > + GFP_KERNEL);
> > > + if (!mem)
> > > + return -ENOMEM;
> > > + /* Map it as normal memory */
> > > + size = resource_size(res);
> > > + mem->va = devm_ioremap_wc(dev, res->start, size);
> > > + mem->len = size;
> > > + dma = (dma_addr_t)res->start;
> > > + mem->dma = dma;
> > > + /* TCM memory:
> > > + * TCM_0: da 0 <-> global addr 0xFFE00000
> > > + * TCM_1: da 0 <-> global addr 0xFFE90000
> > > + */
> > > + if ((dma & 0xFFF00000) == 0xFFE00000) {
> > > + if ((dma & 0xFFF80000) == 0xFFE80000)
> > > + mem->da -= 0x90000;
> > > + else
> > > + mem->da = (dma & 0x000FFFFF);
> > > + }
> > > + dev_dbg(dev, "%s: va = %p, da = 0x%x dma = 0x%llx\n",
> > > + __func__, mem->va, mem->da, mem->dma);
> > > + list_add_tail(&mem->node, &pdata->mems);
> >
> > Looks like carevout patch series [1]. Did you try it? I think it is better to
> > communalize code instead of duplicated it in each platform driver.
> > [1] https://lkml.org/lkml/2018/7/27/612
> I was aware that you have defined rproc_mem_entry_init() and
> rproc_add_carveout()
> Functions, just those patches are not in upstream yet. I didn't use them in
> this patch.
> I can change to use those functions in the next version.
If you want your driver been accepted, carveout series should be upstreamed first as you have a clear dependency on.
Please review and test it.
Then rebase your driver on it to propose final code version.
> >
> > > + }
> > > + return 0;
> > > +}
> > > +
> > > +/* zynqmp_r5_get_reserved_mems() - get reserved memories
> > > + * @pdev: pointer to the platform device
> > > + * @pdata: pointer to the remoteproc private data
> > > + *
> > > + * Function to create remoteproc memory entries from memory-region
> > > + * property.
> > > + */
> > > +static int zynqmp_r5_get_reserved_mems(struct platform_device
> *pdev,
> > > + struct zynqmp_r5_rproc_pdata *pdata) {
> > > + struct device *dev = &pdev->dev;
> > > + struct device_node *np = dev->of_node;
> > > + int num_mems;
> > > + int i;
> > > +
> > > + num_mems = of_count_phandle_with_args(np, "memory-region",
> > > NULL);
> > > + if (num_mems <= 0)
> > > + return 0;
> > > + for (i = 0; i < num_mems; i++) {
> > > + struct device_node *node;
> > > + struct resource res;
> > > + resource_size_t size;
> > > + struct rproc_mem_entry *mem;
> > > + int ret;
> > > +
> > > + node = of_parse_phandle(np, "memory-region", i);
> > > + ret = of_device_is_compatible(node, "rproc-prog-memory");
> > > + if (!ret) {
> > > + /* it is DMA memory. */
> > > + dev_info(dev, "%s, dma memory %d\n", __func__,
> > > i);
> > > + ret = of_reserved_mem_device_init_by_idx(dev,
> > > + np, i);
> > > + if (ret) {
> > > + dev_err(dev, "unable to reserve DMA
> > > mem.\n");
> > > + return ret;
> > > + }
> > > + continue;
> > > + }
> > > + ret = of_address_to_resource(node, 0, &res);
> > > + if (ret) {
> > > + dev_err(dev, "unable to resolve memory region.\n");
> > > + return ret;
> > > + }
> > > + mem = devm_kzalloc(dev, sizeof(struct rproc_mem_entry),
> > > + GFP_KERNEL);
> > > + if (!mem)
> > > + return -ENOMEM;
> > > + /* Map it as normal memory */
> > > + size = resource_size(&res);
> > > + mem->va = devm_ioremap_wc(dev, res.start, size);
> > > + mem->len = size;
> > > + mem->dma = (dma_addr_t)res.start;
> > > + mem->da = (u32)res.start;
> > > + dev_dbg(dev, "%s: va = %p, da = 0x%x dma = 0x%llx\n",
> > > + __func__, mem->va, mem->da, mem->dma);
> > > + list_add_tail(&mem->node, &pdata->mems);
> > > + }
> > > + return 0;
> > > +}
> > > +
> > > +static int zynqmp_r5_remoteproc_probe(struct platform_device *pdev)
> {
> > > + const unsigned char *prop;
> > > + struct resource *res;
> > > + int ret = 0;
> > > + struct zynqmp_r5_rproc_pdata *local;
> > > + struct rproc *rproc;
> > > +
> > > + rproc = rproc_alloc(&pdev->dev, dev_name(&pdev->dev),
> > > + &zynqmp_r5_rproc_ops, NULL,
> > > + sizeof(struct zynqmp_r5_rproc_pdata));
> > > + if (!rproc) {
> > > + dev_err(&pdev->dev, "rproc allocation failed\n");
> > > + return -ENOMEM;
> > > + }
> > > + local = rproc->priv;
> > > + local->rproc = rproc;
> > > +
> > > + platform_set_drvdata(pdev, rproc);
> > > +
> > > + /* Override parse_fw op to allow no resource table firmware */
> > > + rproc->ops->parse_fw = zynqmp_r5_parse_fw;
> > > +
> > > + ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
> > > + if (ret) {
> > > + dev_err(&pdev->dev, "dma_set_coherent_mask: %d\n",
> > > ret);
> > > + goto rproc_fault;
> > > + }
> > > +
> > > + /* Get the RPU power domain id */
> > > + ret = of_property_read_u32(pdev->dev.of_node, "rpu-pnode-id",
> > > + &local->rpu_pnode_id);
> > > + if (ret) {
> > > + dev_err(&pdev->dev, "No RPU power node ID is
> > > specified.\n");
> > > + ret = -EINVAL;
> > > + goto rproc_fault;
> > > + }
> > > + dev_dbg(&pdev->dev, "RPU[%d] pnode_id = %d.\n",
> > > + local->rpu_id, local->rpu_pnode_id);
> > > +
> > > + prop = of_get_property(pdev->dev.of_node, "core_conf", NULL);
> > > + if (!prop) {
> > > + dev_warn(&pdev->dev, "default core_conf used: lock-
> > > step\n");
> > > + prop = "lock-step";
> > > + }
> > > +
> > > + dev_info(&pdev->dev, "RPU core_conf: %s\n", prop);
> > > + if (!strcmp(prop, "split0")) {
> > > + local->rpu_mode = PM_RPU_MODE_SPLIT;
> > > + local->rpu_id = 0;
> > > + local->ipi_dest_mask = RPU_0_IPI_MASK;
> > > + } else if (!strcmp(prop, "split1")) {
> > > + local->rpu_mode = PM_RPU_MODE_SPLIT;
> > > + local->rpu_id = 1;
> > > + local->ipi_dest_mask = RPU_1_IPI_MASK;
> > > + } else if (!strcmp(prop, "lock-step")) {
> > > + local->rpu_mode = PM_RPU_MODE_LOCKSTEP;
> > > + local->rpu_id = 0;
> > > + local->ipi_dest_mask = RPU_0_IPI_MASK;
> > > + } else {
> > > + dev_err(&pdev->dev, "Invalid core_conf mode provided - %s
> > > , %d\n",
> > > + prop, local->rpu_mode);
> > > + ret = -EINVAL;
> > > + goto rproc_fault;
> > > + }
> > > +
> > > + res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> > > "ipi");
> > > + if (res) {
> > > + local->ipi_base = devm_ioremap(&pdev->dev, res->start,
> > > + resource_size(res));
> > > + if (IS_ERR(local->ipi_base)) {
> > > + pr_err("%s: Unable to map IPI\n", __func__);
> > > + ret = PTR_ERR(local->ipi_base);
> > > + goto rproc_fault;
> > > + }
> > > + } else {
> > > + dev_info(&pdev->dev, "IPI resource is not specified.\n");
> > > + }
> > > + dev_dbg(&pdev->dev, "got ipi base address\n");
> > > +
> > > + INIT_LIST_HEAD(&local->mems);
> > > + /* Get TCM memories */
> > > + ret = zynqmp_r5_get_tcms(pdev, local);
> > > + if (ret < 0) {
> > > + dev_err(&pdev->dev, "failed to get TCM memories.\n");
> > > + goto rproc_fault;
> > > + }
> > > + dev_dbg(&pdev->dev, "got TCM memories\n");
> > > + /* Get reserved memory regions for firmware */
> > > + ret = zynqmp_r5_get_reserved_mems(pdev, local);
> > > + if (ret < 0) {
> > > + dev_err(&pdev->dev, "failed to get reserved memories.\n");
> > > + goto rproc_fault;
> > > + }
> > > + dev_dbg(&pdev->dev, "got reserved memories.\n");
> > > +
> > > + /* Disable IPI before requesting IPI IRQ */
> > > + disable_ipi(local);
> > > + INIT_WORK(&local->workqueue, handle_event_notified);
> > > +
> > > + /* IPI IRQ */
> > > + if (local->ipi_base) {
> > > + ret = platform_get_irq(pdev, 0);
> > > + if (ret < 0) {
> > > + dev_err(&pdev->dev, "unable to find IPI IRQ\n");
> > > + goto rproc_fault;
> > > + }
> > > + local->irq = ret;
> > > + ret = devm_request_irq(&pdev->dev, local->irq,
> > > + r5_remoteproc_interrupt, IRQF_SHARED,
> > > + dev_name(&pdev->dev), &pdev->dev);
> > > + if (ret) {
> > > + dev_err(&pdev->dev, "IRQ %d already allocated\n",
> > > + local->irq);
> > > + goto rproc_fault;
> > > + }
> > > + dev_dbg(&pdev->dev, "notification irq: %d\n", local->irq);
> > > + }
> > > +
> > > + ret = zynqmp_r5_rproc_init(local->rproc);
> > > + if (ret) {
> > > + dev_err(&pdev->dev, "failed to init ZynqMP R5 rproc\n");
> > > + goto rproc_fault;
> > > + }
> > > +
> > > + rproc->auto_boot = autoboot;
> > > +
> > > + ret = rproc_add(local->rproc);
> > > + if (ret) {
> > > + dev_err(&pdev->dev, "rproc registration failed\n");
> > > + goto rproc_fault;
> > > + }
> > > +
> > > + return ret;
> > > +
> > > +rproc_fault:
> > > + rproc_free(local->rproc);
> > > +
> > > + return ret;
> > > +}
> > > +
> > > +static int zynqmp_r5_remoteproc_remove(struct platform_device
> *pdev)
> > > +{
> > > + struct rproc *rproc = platform_get_drvdata(pdev);
> > > + struct zynqmp_r5_rproc_pdata *local = rproc->priv;
> > > + struct rproc_mem_entry *mem;
> > > +
> > > + dev_info(&pdev->dev, "%s\n", __func__);
> > > +
> > > + rproc_del(rproc);
> > > +
> > > + list_for_each_entry(mem, &local->mems, node) {
> > > + if (mem->priv)
> > > + gen_pool_free((struct gen_pool *)mem->priv,
> > > + (unsigned long)mem->va, mem->len);
> > > + }
> > > +
> > > + r5_release_tcm(local);
> > > + of_reserved_mem_device_release(&pdev->dev);
> > > + rproc_free(rproc);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +/* Match table for OF platform binding */ static const struct
> > > +of_device_id zynqmp_r5_remoteproc_match[] = {
> > > + { .compatible = "xlnx,zynqmp-r5-remoteproc-1.0", },
> > > + { /* end of list */ },
> > > +};
> > > +MODULE_DEVICE_TABLE(of, zynqmp_r5_remoteproc_match);
> > > +
> > > +static struct platform_driver zynqmp_r5_remoteproc_driver = {
> > > + .probe = zynqmp_r5_remoteproc_probe,
> > > + .remove = zynqmp_r5_remoteproc_remove,
> > > + .driver = {
> > > + .name = "zynqmp_r5_remoteproc",
> > > + .of_match_table = zynqmp_r5_remoteproc_match,
> > > + },
> > > +};
> > > +module_platform_driver(zynqmp_r5_remoteproc_driver);
> > > +
> > > +module_param_named(autoboot, autoboot, bool, 0444);
> > > +MODULE_PARM_DESC(autoboot,
> > > + "enable | disable autoboot. (default: true)");
> > > +
> > > +MODULE_AUTHOR("Jason Wu <j.wu@...inx.com>");
> > MODULE_LICENSE("GPL
> > > +v2"); MODULE_DESCRIPTION("ZynqMP R5 remote processor control
> > > +driver");
> > > --
> > > 2.7.4
Powered by blists - more mailing lists