linux-kernel - Re: [PATCH 2/2] MIPS: Fix CONFIG

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20180911172338.xdqmkmp3brut4ish@pburton-laptop>
Date:   Tue, 11 Sep 2018 10:23:38 -0700
From:   Paul Burton <paul.burton@...s.com>
To:     Mathieu Malaterre <malat@...ian.org>
Cc:     Linux-MIPS <linux-mips@...ux-mips.org>,
        Paul Cercueil <paul@...pouillou.net>,
        LKML <linux-kernel@...r.kernel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>,
        Frank Rowand <frowand.list@...il.com>,
        Jaedon Shin <jaedon.shin@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        "# v4 . 11" <stable@...r.kernel.org>
Subject: Re: [PATCH 2/2] MIPS: Fix CONFIG_CMDLINE handling

Hi Matthieu,

On Mon, Sep 10, 2018 at 02:09:21PM +0200, Mathieu Malaterre wrote:
> On Fri, Sep 7, 2018 at 8:55 PM Paul Burton <paul.burton@...s.com> wrote:
> > Commit 8ce355cf2e38 ("MIPS: Setup boot_command_line before
> > plat_mem_setup") fixed a problem for systems which have
> > CONFIG_CMDLINE_BOOL=y & use a DT with a chosen node that has either no
> > bootargs property or an empty one. In this configuration
> > early_init_dt_scan_chosen() copies CONFIG_CMDLINE into
> > boot_command_line, but the MIPS code doesn't know this so it appends
> > CONFIG_CMDLINE (via builtin_cmdline) to boot_command_line again. The
> > result is that boot_command_line contains the arguments from
> > CONFIG_CMDLINE twice.
> >
> > That commit took the approach of simply setting up boot_command_line
> > from the MIPS code before early_init_dt_scan_chosen() runs, causing it
> > not to copy CONFIG_CMDLINE to boot_command_line if a chosen node with no
> > bootargs property is found.
> >
> > Unfortunately this is problematic for systems which do have a non-empty
> > bootargs property & CONFIG_CMDLINE_BOOL=y. There
> > early_init_dt_scan_chosen() will overwrite boot_command_line with the
> > arguments from DT, which means we lose those from CONFIG_CMDLINE
> > entirely. This breaks CONFIG_MIPS_CMDLINE_DTB_EXTEND. If we have
> > CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER or
> > CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND selected and the DT has a bootargs
> > property which we should ignore, it will instead be honoured breaking
> > those configurations too.
> >
> > Fix this by reverting commit 8ce355cf2e38 ("MIPS: Setup
> > boot_command_line before plat_mem_setup") to restore the former
> > behaviour, and fixing the CONFIG_CMDLINE duplication issue by instead
> > providing a no-op implementation of early_init_dt_fixup_cmdline_arch()
> > to prevent early_init_dt_scan_chosen() from using CONFIG_CMDLINE.
> 
> Sorry I cannot test this patch ATM. I've simply CCed Paul C. just in case.

Thanks - for the record I did test on a Ci20, though I was booting using
my ci20-usb-boot tool which doesn't currently provide a command line to
the kernel. CONFIG_CMDLINE didn't get duplicated though.

I'll get back to a v2 for this & hopefully get it fixed up for 4.19, but
it might take a little while because my son was just born on Saturday :)

Thanks,
    Paul