| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1dd7bad420f01e3dc9d02c6dc493d8005ff2b5a1.1536709753.git.fthain@telegraphics.com.au>
Date: Tue, 11 Sep 2018 20:18:44 -0400 (EDT)
From: Finn Thain <fthain@...egraphics.com.au>
To: Benjamin Herrenschmidt <benh@...nel.crashing.org>
Cc: <linuxppc-dev@...ts.ozlabs.org>, <linux-m68k@...ts.linux-m68k.org>,
<linux-kernel@...r.kernel.org>,
Andreas Schwab <schwab@...ux-m68k.org>
Subject: [PATCH 2/7] macintosh/adb: Rework printk output again
Avoid the KERN_CONT problem by avoiding message fragments. The problem
arises during async ADB bus probing, when ADB messages may get mixed up
with other messages. See also, commit 4bcc595ccd80 ("printk: reinstate
KERN_CONT for printing continuation lines").
Remove a number of printk() continuation lines by logging handler
changes in adb_try_handler_change() instead.
This patch addresses the problematic use of "\n" at the beginning of
pr_cont() messages, which got overlooked in commit f2be6295684b
("macintosh/adb: Properly mark continued kernel messages").
That commit also changed printk(KERN_DEBUG ...) to pr_debug(...), which
hinders work on low-level ADB driver bugs. Revert that change.
Cc: Andreas Schwab <schwab@...ux-m68k.org>
Tested-by: Stan Johnson <userm57@...oo.com>
Signed-off-by: Finn Thain <fthain@...egraphics.com.au>
---
drivers/macintosh/adb.c | 8 ++++---
drivers/macintosh/adbhid.c | 53 ++++++++++++++++++----------------------------
2 files changed, 26 insertions(+), 35 deletions(-)
diff --git a/drivers/macintosh/adb.c b/drivers/macintosh/adb.c
index 76e98f0f7a3e..e49d1f287a17 100644
--- a/drivers/macintosh/adb.c
+++ b/drivers/macintosh/adb.c
@@ -203,15 +203,15 @@ static int adb_scan_bus(void)
}
/* Now fill in the handler_id field of the adb_handler entries. */
- pr_debug("adb devices:\n");
for (i = 1; i < 16; i++) {
if (adb_handler[i].original_address == 0)
continue;
adb_request(&req, NULL, ADBREQ_SYNC | ADBREQ_REPLY, 1,
(i << 4) | 0xf);
adb_handler[i].handler_id = req.reply[2];
- pr_debug(" [%d]: %d %x\n", i, adb_handler[i].original_address,
- adb_handler[i].handler_id);
+ printk(KERN_DEBUG "adb device [%d]: %d 0x%X\n", i,
+ adb_handler[i].original_address,
+ adb_handler[i].handler_id);
devmask |= 1 << i;
}
return devmask;
@@ -579,6 +579,8 @@ adb_try_handler_change(int address, int new_id)
mutex_lock(&adb_handler_mutex);
ret = try_handler_change(address, new_id);
mutex_unlock(&adb_handler_mutex);
+ if (ret)
+ pr_debug("adb handler change: [%d] 0x%X\n", address, new_id);
return ret;
}
EXPORT_SYMBOL(adb_try_handler_change);
diff --git a/drivers/macintosh/adbhid.c b/drivers/macintosh/adbhid.c
index a261892c03b3..75482eeab2c4 100644
--- a/drivers/macintosh/adbhid.c
+++ b/drivers/macintosh/adbhid.c
@@ -757,6 +757,7 @@ adbhid_input_register(int id, int default_id, int original_handler_id,
struct input_dev *input_dev;
int err;
int i;
+ char *keyboard_type;
if (adbhid[id]) {
pr_err("Trying to reregister ADB HID on ID %d\n", id);
@@ -798,24 +799,23 @@ adbhid_input_register(int id, int default_id, int original_handler_id,
memcpy(hid->keycode, adb_to_linux_keycodes, sizeof(adb_to_linux_keycodes));
- pr_info("Detected ADB keyboard, type ");
switch (original_handler_id) {
default:
- pr_cont("<unknown>.\n");
+ keyboard_type = "<unknown>";
input_dev->id.version = ADB_KEYBOARD_UNKNOWN;
break;
case 0x01: case 0x02: case 0x03: case 0x06: case 0x08:
case 0x0C: case 0x10: case 0x18: case 0x1B: case 0x1C:
case 0xC0: case 0xC3: case 0xC6:
- pr_cont("ANSI.\n");
+ keyboard_type = "ANSI";
input_dev->id.version = ADB_KEYBOARD_ANSI;
break;
case 0x04: case 0x05: case 0x07: case 0x09: case 0x0D:
case 0x11: case 0x14: case 0x19: case 0x1D: case 0xC1:
case 0xC4: case 0xC7:
- pr_cont("ISO, swapping keys.\n");
+ keyboard_type = "ISO, swapping keys";
input_dev->id.version = ADB_KEYBOARD_ISO;
i = hid->keycode[10];
hid->keycode[10] = hid->keycode[50];
@@ -824,10 +824,11 @@ adbhid_input_register(int id, int default_id, int original_handler_id,
case 0x12: case 0x15: case 0x16: case 0x17: case 0x1A:
case 0x1E: case 0xC2: case 0xC5: case 0xC8: case 0xC9:
- pr_cont("JIS.\n");
+ keyboard_type = "JIS";
input_dev->id.version = ADB_KEYBOARD_JIS;
break;
}
+ pr_info("Detected ADB keyboard, type %s.\n", keyboard_type);
for (i = 0; i < 128; i++)
if (hid->keycode[i])
@@ -972,16 +973,13 @@ adbhid_probe(void)
->get it to send separate codes for left and right shift,
control, option keys */
#if 0 /* handler 5 doesn't send separate codes for R modifiers */
- if (adb_try_handler_change(id, 5))
- printk("ADB keyboard at %d, handler set to 5\n", id);
- else
+ if (!adb_try_handler_change(id, 5))
#endif
- if (adb_try_handler_change(id, 3))
- printk("ADB keyboard at %d, handler set to 3\n", id);
- else
- printk("ADB keyboard at %d, handler 1\n", id);
+ adb_try_handler_change(id, 3);
adb_get_infos(id, &default_id, &cur_handler_id);
+ printk(KERN_DEBUG "ADB keyboard at %d has handler 0x%X\n",
+ id, cur_handler_id);
reg |= adbhid_input_reregister(id, default_id, org_handler_id,
cur_handler_id, 0);
}
@@ -999,48 +997,44 @@ adbhid_probe(void)
for (i = 0; i < mouse_ids.nids; i++) {
int id = mouse_ids.id[i];
int mouse_kind;
+ char *desc = "standard";
adb_get_infos(id, &default_id, &org_handler_id);
if (adb_try_handler_change(id, 4)) {
- printk("ADB mouse at %d, handler set to 4", id);
mouse_kind = ADBMOUSE_EXTENDED;
}
else if (adb_try_handler_change(id, 0x2F)) {
- printk("ADB mouse at %d, handler set to 0x2F", id);
mouse_kind = ADBMOUSE_MICROSPEED;
}
else if (adb_try_handler_change(id, 0x42)) {
- printk("ADB mouse at %d, handler set to 0x42", id);
mouse_kind = ADBMOUSE_TRACKBALLPRO;
}
else if (adb_try_handler_change(id, 0x66)) {
- printk("ADB mouse at %d, handler set to 0x66", id);
mouse_kind = ADBMOUSE_MICROSPEED;
}
else if (adb_try_handler_change(id, 0x5F)) {
- printk("ADB mouse at %d, handler set to 0x5F", id);
mouse_kind = ADBMOUSE_MICROSPEED;
}
else if (adb_try_handler_change(id, 3)) {
- printk("ADB mouse at %d, handler set to 3", id);
mouse_kind = ADBMOUSE_MS_A3;
}
else if (adb_try_handler_change(id, 2)) {
- printk("ADB mouse at %d, handler set to 2", id);
mouse_kind = ADBMOUSE_STANDARD_200;
}
else {
- printk("ADB mouse at %d, handler 1", id);
mouse_kind = ADBMOUSE_STANDARD_100;
}
if ((mouse_kind == ADBMOUSE_TRACKBALLPRO)
|| (mouse_kind == ADBMOUSE_MICROSPEED)) {
+ desc = "Microspeed/MacPoint or compatible";
init_microspeed(id);
} else if (mouse_kind == ADBMOUSE_MS_A3) {
+ desc = "Mouse Systems A3 Mouse or compatible";
init_ms_a3(id);
} else if (mouse_kind == ADBMOUSE_EXTENDED) {
+ desc = "extended";
/*
* Register 1 is usually used for device
* identification. Here, we try to identify
@@ -1054,32 +1048,36 @@ adbhid_probe(void)
(req.reply[1] == 0x9a) && ((req.reply[2] == 0x21)
|| (req.reply[2] == 0x20))) {
mouse_kind = ADBMOUSE_TRACKBALL;
+ desc = "trackman/mouseman";
init_trackball(id);
}
else if ((req.reply_len >= 4) &&
(req.reply[1] == 0x74) && (req.reply[2] == 0x70) &&
(req.reply[3] == 0x61) && (req.reply[4] == 0x64)) {
mouse_kind = ADBMOUSE_TRACKPAD;
+ desc = "trackpad";
init_trackpad(id);
}
else if ((req.reply_len >= 4) &&
(req.reply[1] == 0x4b) && (req.reply[2] == 0x4d) &&
(req.reply[3] == 0x4c) && (req.reply[4] == 0x31)) {
mouse_kind = ADBMOUSE_TURBOMOUSE5;
+ desc = "TurboMouse 5";
init_turbomouse(id);
}
else if ((req.reply_len == 9) &&
(req.reply[1] == 0x4b) && (req.reply[2] == 0x4f) &&
(req.reply[3] == 0x49) && (req.reply[4] == 0x54)) {
if (adb_try_handler_change(id, 0x42)) {
- pr_cont("\nADB MacAlly 2-button mouse at %d, handler set to 0x42", id);
mouse_kind = ADBMOUSE_MACALLY2;
+ desc = "MacAlly 2-button";
}
}
}
- pr_cont("\n");
adb_get_infos(id, &default_id, &cur_handler_id);
+ printk(KERN_DEBUG "ADB mouse (%s) at %d has handler 0x%X\n",
+ desc, id, cur_handler_id);
reg |= adbhid_input_reregister(id, default_id, org_handler_id,
cur_handler_id, mouse_kind);
}
@@ -1092,12 +1090,10 @@ init_trackpad(int id)
struct adb_request req;
unsigned char r1_buffer[8];
- pr_cont(" (trackpad)");
-
adb_request(&req, NULL, ADBREQ_SYNC | ADBREQ_REPLY, 1,
ADB_READREG(id,1));
if (req.reply_len < 8)
- pr_cont("bad length for reg. 1\n");
+ pr_err("%s: bad length for reg. 1\n", __func__);
else
{
memcpy(r1_buffer, &req.reply[1], 8);
@@ -1145,8 +1141,6 @@ init_trackball(int id)
{
struct adb_request req;
- pr_cont(" (trackman/mouseman)");
-
adb_request(&req, NULL, ADBREQ_SYNC, 3,
ADB_WRITEREG(id,1), 00,0x81);
@@ -1177,8 +1171,6 @@ init_turbomouse(int id)
{
struct adb_request req;
- pr_cont(" (TurboMouse 5)");
-
adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(id));
adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(3));
@@ -1213,8 +1205,6 @@ init_microspeed(int id)
{
struct adb_request req;
- pr_cont(" (Microspeed/MacPoint or compatible)");
-
adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(id));
/* This will initialize mice using the Microspeed, MacPoint and
@@ -1253,7 +1243,6 @@ init_ms_a3(int id)
{
struct adb_request req;
- pr_cont(" (Mouse Systems A3 Mouse, or compatible)");
adb_request(&req, NULL, ADBREQ_SYNC, 3,
ADB_WRITEREG(id, 0x2),
0x00,
--
2.16.4
Powered by blists - more mailing lists