| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1536781120-22794-5-git-send-email-jollys@xilinx.com>
Date: Wed, 12 Sep 2018 12:38:38 -0700
From: Jolly Shah <jolly.shah@...inx.com>
To: <olof@...om.net>, <michal.simek@...inx.com>, <arm@...nel.org>
CC: <rajanv@...inx.com>, <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, Jolly Shah <jollys@...inx.com>
Subject: [PATCH v12 4/6] firmware: xilinx: Add clock APIs
From: Rajan Vaja <rajanv@...inx.com>
Add clock APIs to control clocks through firmware
interface.
Signed-off-by: Rajan Vaja <rajanv@...inx.com>
Signed-off-by: Jolly Shah <jollys@...inx.com>
---
drivers/firmware/xilinx/zynqmp.c | 186 ++++++++++++++++++++++++++++++++++-
include/linux/firmware/xlnx-zynqmp.h | 30 ++++++
2 files changed, 214 insertions(+), 2 deletions(-)
diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index 2a333c0..697f4fa 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -250,13 +250,195 @@ static int get_set_conduit_method(struct device_node *np)
*/
static int zynqmp_pm_query_data(struct zynqmp_pm_query_data qdata, u32 *out)
{
- return zynqmp_pm_invoke_fn(PM_QUERY_DATA, qdata.qid, qdata.arg1,
- qdata.arg2, qdata.arg3, out);
+ int ret;
+
+ ret = zynqmp_pm_invoke_fn(PM_QUERY_DATA, qdata.qid, qdata.arg1,
+ qdata.arg2, qdata.arg3, out);
+
+ /*
+ * For clock name query, all bytes in SMC response are clock name
+ * characters and return code is always success. For invalid clocks,
+ * clock name bytes would be zeros.
+ */
+ return qdata.qid == PM_QID_CLOCK_GET_NAME ? 0 : ret;
+}
+
+/**
+ * zynqmp_pm_clock_enable() - Enable the clock for given id
+ * @clock_id: ID of the clock to be enabled
+ *
+ * This function is used by master to enable the clock
+ * including peripherals and PLL clocks.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_clock_enable(u32 clock_id)
+{
+ return zynqmp_pm_invoke_fn(PM_CLOCK_ENABLE, clock_id, 0, 0, 0, NULL);
+}
+
+/**
+ * zynqmp_pm_clock_disable() - Disable the clock for given id
+ * @clock_id: ID of the clock to be disable
+ *
+ * This function is used by master to disable the clock
+ * including peripherals and PLL clocks.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_clock_disable(u32 clock_id)
+{
+ return zynqmp_pm_invoke_fn(PM_CLOCK_DISABLE, clock_id, 0, 0, 0, NULL);
+}
+
+/**
+ * zynqmp_pm_clock_getstate() - Get the clock state for given id
+ * @clock_id: ID of the clock to be queried
+ * @state: 1/0 (Enabled/Disabled)
+ *
+ * This function is used by master to get the state of clock
+ * including peripherals and PLL clocks.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_clock_getstate(u32 clock_id, u32 *state)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETSTATE, clock_id, 0,
+ 0, 0, ret_payload);
+ *state = ret_payload[1];
+
+ return ret;
+}
+
+/**
+ * zynqmp_pm_clock_setdivider() - Set the clock divider for given id
+ * @clock_id: ID of the clock
+ * @divider: divider value
+ *
+ * This function is used by master to set divider for any clock
+ * to achieve desired rate.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_clock_setdivider(u32 clock_id, u32 divider)
+{
+ return zynqmp_pm_invoke_fn(PM_CLOCK_SETDIVIDER, clock_id, divider,
+ 0, 0, NULL);
+}
+
+/**
+ * zynqmp_pm_clock_getdivider() - Get the clock divider for given id
+ * @clock_id: ID of the clock
+ * @divider: divider value
+ *
+ * This function is used by master to get divider values
+ * for any clock.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_clock_getdivider(u32 clock_id, u32 *divider)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETDIVIDER, clock_id, 0,
+ 0, 0, ret_payload);
+ *divider = ret_payload[1];
+
+ return ret;
+}
+
+/**
+ * zynqmp_pm_clock_setrate() - Set the clock rate for given id
+ * @clock_id: ID of the clock
+ * @rate: rate value in hz
+ *
+ * This function is used by master to set rate for any clock.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_clock_setrate(u32 clock_id, u64 rate)
+{
+ return zynqmp_pm_invoke_fn(PM_CLOCK_SETRATE, clock_id,
+ lower_32_bits(rate),
+ upper_32_bits(rate),
+ 0, NULL);
+}
+
+/**
+ * zynqmp_pm_clock_getrate() - Get the clock rate for given id
+ * @clock_id: ID of the clock
+ * @rate: rate value in hz
+ *
+ * This function is used by master to get rate
+ * for any clock.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_clock_getrate(u32 clock_id, u64 *rate)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETRATE, clock_id, 0,
+ 0, 0, ret_payload);
+ *rate = ((u64)ret_payload[2] << 32) | ret_payload[1];
+
+ return ret;
+}
+
+/**
+ * zynqmp_pm_clock_setparent() - Set the clock parent for given id
+ * @clock_id: ID of the clock
+ * @parent_id: parent id
+ *
+ * This function is used by master to set parent for any clock.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_clock_setparent(u32 clock_id, u32 parent_id)
+{
+ return zynqmp_pm_invoke_fn(PM_CLOCK_SETPARENT, clock_id,
+ parent_id, 0, 0, NULL);
+}
+
+/**
+ * zynqmp_pm_clock_getparent() - Get the clock parent for given id
+ * @clock_id: ID of the clock
+ * @parent_id: parent id
+ *
+ * This function is used by master to get parent index
+ * for any clock.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_clock_getparent(u32 clock_id, u32 *parent_id)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETPARENT, clock_id, 0,
+ 0, 0, ret_payload);
+ *parent_id = ret_payload[1];
+
+ return ret;
}
static const struct zynqmp_eemi_ops eemi_ops = {
.get_api_version = zynqmp_pm_get_api_version,
.query_data = zynqmp_pm_query_data,
+ .clock_enable = zynqmp_pm_clock_enable,
+ .clock_disable = zynqmp_pm_clock_disable,
+ .clock_getstate = zynqmp_pm_clock_getstate,
+ .clock_setdivider = zynqmp_pm_clock_setdivider,
+ .clock_getdivider = zynqmp_pm_clock_getdivider,
+ .clock_setrate = zynqmp_pm_clock_setrate,
+ .clock_getrate = zynqmp_pm_clock_getrate,
+ .clock_setparent = zynqmp_pm_clock_setparent,
+ .clock_getparent = zynqmp_pm_clock_getparent,
};
/**
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 287f42c..015e130 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -35,6 +35,15 @@
enum pm_api_id {
PM_GET_API_VERSION = 1,
PM_QUERY_DATA = 35,
+ PM_CLOCK_ENABLE,
+ PM_CLOCK_DISABLE,
+ PM_CLOCK_GETSTATE,
+ PM_CLOCK_SETDIVIDER,
+ PM_CLOCK_GETDIVIDER,
+ PM_CLOCK_SETRATE,
+ PM_CLOCK_GETRATE,
+ PM_CLOCK_SETPARENT,
+ PM_CLOCK_GETPARENT,
};
/* PMU-FW return status codes */
@@ -48,8 +57,20 @@ enum pm_ret_status {
XST_PM_ABORT_SUSPEND,
};
+enum pm_ioctl_id {
+ IOCTL_SET_PLL_FRAC_MODE = 8,
+ IOCTL_GET_PLL_FRAC_MODE,
+ IOCTL_SET_PLL_FRAC_DATA,
+ IOCTL_GET_PLL_FRAC_DATA,
+};
+
enum pm_query_id {
PM_QID_INVALID,
+ PM_QID_CLOCK_GET_NAME,
+ PM_QID_CLOCK_GET_TOPOLOGY,
+ PM_QID_CLOCK_GET_FIXEDFACTOR_PARAMS,
+ PM_QID_CLOCK_GET_PARENTS,
+ PM_QID_CLOCK_GET_ATTRIBUTES,
};
/**
@@ -69,6 +90,15 @@ struct zynqmp_pm_query_data {
struct zynqmp_eemi_ops {
int (*get_api_version)(u32 *version);
int (*query_data)(struct zynqmp_pm_query_data qdata, u32 *out);
+ int (*clock_enable)(u32 clock_id);
+ int (*clock_disable)(u32 clock_id);
+ int (*clock_getstate)(u32 clock_id, u32 *state);
+ int (*clock_setdivider)(u32 clock_id, u32 divider);
+ int (*clock_getdivider)(u32 clock_id, u32 *divider);
+ int (*clock_setrate)(u32 clock_id, u64 rate);
+ int (*clock_getrate)(u32 clock_id, u64 *rate);
+ int (*clock_setparent)(u32 clock_id, u32 parent_id);
+ int (*clock_getparent)(u32 clock_id, u32 *parent_id);
};
#if IS_REACHABLE(CONFIG_ARCH_ZYNQMP)
--
2.7.4
Powered by blists - more mailing lists