[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <8e97bc7f-57b9-e9fd-e304-9e8158530ca4@ideasonboard.com>
Date: Fri, 14 Sep 2018 11:59:05 +0100
From: Kieran Bingham <kieran.bingham+renesas@...asonboard.com>
To: Laurent Pinchart <laurent.pinchart@...asonboard.com>
Cc: mchehab@...nel.org, linux-media@...r.kernel.org,
linux-renesas-soc@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/6] media: vsp1: Correct the pitch on multiplanar formats
Hi Laurent,
On 14/09/18 11:25, Laurent Pinchart wrote:
> Hi Kieran,
>
> Thank you for the patch.
>
> On Friday, 31 August 2018 17:40:40 EEST Kieran Bingham wrote:
>> DRM pipelines now support tri-planar as well as packed formats with
>> YCbCr, however the pitch calculation was not updated to support this.
>>
>> Correct this by adjusting the bytesperline accordingly when 3 planes are
>> used.
>>
>> Fixes: 7863ac504bc5 ("drm: rcar-du: Add tri-planar memory formats support")
>> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@...asonboard.com>
>
> I already have a similar patch from Matsuoka-san in my tree, please see
> https://patchwork.kernel.org/patch/10425565/. I'll update it with the fixes
> tag.
>
>> ---
>> drivers/media/platform/vsp1/vsp1_drm.c | 10 ++++++++++
>> include/media/vsp1.h | 2 +-
>> 2 files changed, 11 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/media/platform/vsp1/vsp1_drm.c
>> b/drivers/media/platform/vsp1/vsp1_drm.c index b9c0f695d002..b9afd98f6867
>> 100644
>> --- a/drivers/media/platform/vsp1/vsp1_drm.c
>> +++ b/drivers/media/platform/vsp1/vsp1_drm.c
>> @@ -814,6 +814,16 @@ int vsp1_du_atomic_update(struct device *dev, unsigned
>> int pipe_index, rpf->format.num_planes = fmtinfo->planes;
>> rpf->format.plane_fmt[0].bytesperline = cfg->pitch;
>> rpf->format.plane_fmt[1].bytesperline = cfg->pitch;
>> +
>> + /*
>> + * Packed YUV formats are subsampled, but the packing of two components
>> + * into a single plane compensates for this leaving the bytesperline
>> + * to be the correct value. For multiplanar formats we must adjust the
>> + * pitch accordingly.
>> + */
>> + if (fmtinfo->planes == 3)
>> + rpf->format.plane_fmt[1].bytesperline /= fmtinfo->hsub;
>> +
>> rpf->alpha = cfg->alpha;
>>
>> rpf->mem.addr[0] = cfg->mem[0];
>> diff --git a/include/media/vsp1.h b/include/media/vsp1.h
>> index 3093b9cb9067..0ce19b595cc7 100644
>> --- a/include/media/vsp1.h
>> +++ b/include/media/vsp1.h
>> @@ -46,7 +46,7 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int
>> pipe_index, /**
>> * struct vsp1_du_atomic_config - VSP atomic configuration parameters
>> * @pixelformat: plane pixel format (V4L2 4CC)
>> - * @pitch: line pitch in bytes, for all planes
>> + * @pitch: line pitch in bytes
>
> Should I update the above-mentioned patch with this as well ? How about
> phrasing it as "line pitch in bytes for the first plane" ?
Yes, your suggestion sounds fine.
The patch at [0] looks good to me as a fix for this issue.
for: "v4l: vsp1: Fix YCbCr planar formats pitch calculation" [0]
With the fixes tag, and documentation updated:
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@...asonboard.com>
[0] https://patchwork.kernel.org/patch/10425565
>
>> * @mem: DMA memory address for each plane of the frame buffer
>> * @src: source rectangle in the frame buffer (integer coordinates)
>> * @dst: destination rectangle on the display (integer coordinates)
>
Powered by blists - more mailing lists