| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <cf333297-cc02-51c7-14a0-4d35bc1f8f07@linux.vnet.ibm.com>
Date: Fri, 14 Sep 2018 10:22:38 -0500
From: Eddie James <eajames@...ux.vnet.ibm.com>
To: Hans Verkuil <hverkuil@...all.nl>, linux-kernel@...r.kernel.org
Cc: mark.rutland@....com, devicetree@...r.kernel.org,
linux-aspeed@...ts.ozlabs.org, andrew@...id.au,
openbmc@...ts.ozlabs.org, robh+dt@...nel.org, mchehab@...nel.org,
linux-media@...r.kernel.org
Subject: Re: [PATCH v2 2/2] media: platform: Add Aspeed Video Engine driver
On 09/14/2018 03:19 AM, Hans Verkuil wrote:
> On 09/13/2018 09:29 PM, Eddie James wrote:
>> The Video Engine (VE) embedded in the Aspeed AST2400 and AST2500 SOCs
>> can capture and compress video data from digital or analog sources. With
>> the Aspeed chip acting a service processor, the Video Engine can capture
>> the host processor graphics output.
>>
>> Add a V4L2 driver to capture video data and compress it to JPEG images,
>> making the data available through a standard read interface.
>>
>> Signed-off-by: Eddie James <eajames@...ux.vnet.ibm.com>
>> ---
>> MAINTAINERS | 8 +
>> drivers/media/platform/Kconfig | 8 +
>> drivers/media/platform/Makefile | 1 +
>> drivers/media/platform/aspeed-video.c | 1469 +++++++++++++++++++++++++++++++++
>> 4 files changed, 1486 insertions(+)
>> create mode 100644 drivers/media/platform/aspeed-video.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 389fb2e..d8352ad 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -2356,6 +2356,14 @@ S: Maintained
>> F: Documentation/hwmon/asc7621
>> F: drivers/hwmon/asc7621.c
>>
>> +ASPEED VIDEO ENGINE DRIVER
>> +M: Eddie James <eajames@...ux.vnet.ibm.com>
>> +L: linux-media@...r.kernel.org
>> +L: openbmc@...ts.ozlabs.org (moderated for non-subscribers)
>> +S: Maintained
>> +F: drivers/media/platform/aspeed-video.c
>> +F: Documentation/devicetree/bindings/media/aspeed-video.txt
>> +
>> ASUS NOTEBOOKS AND EEEPC ACPI/WMI EXTRAS DRIVERS
>> M: Corentin Chary <corentin.chary@...il.com>
>> L: acpi4asus-user@...ts.sourceforge.net
>> diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
>> index f627587..5cce385 100644
>> --- a/drivers/media/platform/Kconfig
>> +++ b/drivers/media/platform/Kconfig
>> @@ -32,6 +32,14 @@ source "drivers/media/platform/davinci/Kconfig"
>>
>> source "drivers/media/platform/omap/Kconfig"
>>
>> +config VIDEO_ASPEED
>> + tristate "Aspeed AST2400 and AST2500 Video Engine driver"
>> + depends on VIDEO_V4L2
>> + help
>> + Support for the Aspeed Video Engine (VE) embedded in the Aspeed
>> + AST2400 and AST2500 SOCs. The VE can capture and compress video data
>> + from digital or analog sources.
>> +
>> config VIDEO_SH_VOU
>> tristate "SuperH VOU video output driver"
>> depends on MEDIA_CAMERA_SUPPORT
>> diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
>> index 6ab6200..2973953 100644
>> --- a/drivers/media/platform/Makefile
>> +++ b/drivers/media/platform/Makefile
>> @@ -3,6 +3,7 @@
>> # Makefile for the video capture/playback device drivers.
>> #
>>
>> +obj-$(CONFIG_VIDEO_ASPEED) += aspeed-video.o
>> obj-$(CONFIG_VIDEO_CADENCE) += cadence/
>> obj-$(CONFIG_VIDEO_VIA_CAMERA) += via-camera.o
>> obj-$(CONFIG_VIDEO_CAFE_CCIC) += marvell-ccic/
>> diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
>> new file mode 100644
>> index 0000000..4f55c2e
>> --- /dev/null
>> +++ b/drivers/media/platform/aspeed-video.c
>> @@ -0,0 +1,1469 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +
>> +#include <linux/atomic.h>
>> +#include <linux/bitfield.h>
>> +#include <linux/clk.h>
>> +#include <linux/delay.h>
>> +#include <linux/device.h>
>> +#include <linux/dma-mapping.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/jiffies.h>
>> +#include <linux/module.h>
>> +#include <linux/mutex.h>
>> +#include <linux/of.h>
>> +#include <linux/of_irq.h>
>> +#include <linux/of_reserved_mem.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/reset.h>
>> +#include <linux/sched.h>
>> +#include <linux/spinlock.h>
>> +#include <linux/string.h>
>> +#include <linux/v4l2-controls.h>
> No need for this,
>
>> +#include <linux/videodev2.h>
> it's already included by videodev2.h.
>
>> +#include <linux/wait.h>
>> +#include <linux/workqueue.h>
>> +#include <media/v4l2-ctrls.h>
>> +#include <media/v4l2-dev.h>
>> +#include <media/v4l2-device.h>
>> +#include <media/v4l2-event.h>
>> +#include <media/v4l2-ioctl.h>
>> +
>> +#define DEVICE_NAME "aspeed-video"
>> +
>> +#define ASPEED_VIDEO_JPEG_NUM_QUALITIES 12
>> +#define ASPEED_VIDEO_JPEG_HEADER_SIZE 10
>> +#define ASPEED_VIDEO_JPEG_QUANT_SIZE 116
>> +#define ASPEED_VIDEO_JPEG_DCT_SIZE 34
>> +
>> +#define MAX_FRAME_RATE 60
>> +#define NUM_POLARITY_CHECKS 10
>> +#define INVALID_RESOLUTION_RETRIES 1
>> +#define INVALID_RESOLUTION_DELAY msecs_to_jiffies(250)
>> +#define RESOLUTION_CHANGE_DELAY msecs_to_jiffies(500)
>> +#define MODE_DETECT_TIMEOUT msecs_to_jiffies(500)
>> +#define DIRECT_FETCH_THRESHOLD 0x0c0000 /* 1024 * 768, 32bpp */
>> +
>> +#define VE_SRC_BUFFER_SIZE 0x900000 /* 1920 * 1200, 32bpp */
>> +#define VE_COMP_BUFFER_SIZE 0x100000 /* 128K packet * 8 packets */
>> +#define VE_JPEG_BUFFER_SIZE 0x006000 /* 512 * 12 * 4 */
>> +
>> +#define VE_PROTECTION_KEY 0x000
>> +#define VE_PROTECTION_KEY_UNLOCK 0x1A038AA8
> The linux codingstyle is lower case hex (so A-F -> a-f).
>
>> +
>> +#define VE_SEQ_CTRL 0x004
>> +#define VE_SEQ_CTRL_TRIG_MODE_DET BIT(0)
>> +#define VE_SEQ_CTRL_TRIG_CAPTURE BIT(1)
>> +#define VE_SEQ_CTRL_FORCE_IDLE BIT(2)
>> +#define VE_SEQ_CTRL_MULT_FRAME BIT(3)
>> +#define VE_SEQ_CTRL_TRIG_COMP BIT(4)
>> +#define VE_SEQ_CTRL_AUTO_COMP BIT(5)
>> +#define VE_SEQ_CTRL_EN_WATCHDOG BIT(7)
>> +#define VE_SEQ_CTRL_YUV420 BIT(10)
>> +#define VE_SEQ_CTRL_COMP_FMT GENMASK(11, 10)
>> +#define VE_SEQ_CTRL_HALT BIT(12)
>> +#define VE_SEQ_CTRL_EN_WATCHDOG_COMP BIT(14)
>> +#define VE_SEQ_CTRL_TRIG_JPG BIT(15)
>> +#define VE_SEQ_CTRL_CAP_BUSY BIT(16)
>> +#define VE_SEQ_CTRL_COMP_BUSY BIT(18)
>> +
>> +#ifdef CONFIG_MACH_ASPEED_G5
>> +#define VE_SEQ_CTRL_JPEG_MODE BIT(13) /* AST2500 */
>> +#else
>> +#define VE_SEQ_CTRL_JPEG_MODE BIT(8) /* AST2400 */
>> +#endif /* CONFIG_MACH_ASPEED_G5 */
>> +
>> +#define VE_CTRL 0x008
>> +#define VE_CTRL_HSYNC_POL BIT(0)
>> +#define VE_CTRL_VSYNC_POL BIT(1)
>> +#define VE_CTRL_SOURCE BIT(2)
>> +#define VE_CTRL_INT_DE BIT(4)
>> +#define VE_CTRL_DIRECT_FETCH BIT(5)
>> +#define VE_CTRL_YUV BIT(6)
>> +#define VE_CTRL_RGB BIT(7)
>> +#define VE_CTRL_CAPTURE_FMT GENMASK(7, 6)
>> +#define VE_CTRL_AUTO_OR_CURSOR BIT(8)
>> +#define VE_CTRL_CLK_INVERSE BIT(11)
>> +#define VE_CTRL_CLK_DELAY GENMASK(11, 9)
>> +#define VE_CTRL_INTERLACE BIT(14)
>> +#define VE_CTRL_HSYNC_POL_CTRL BIT(15)
>> +#define VE_CTRL_FRC GENMASK(23, 16)
>> +
>> +#define VE_TGS_0 0x00c
>> +#define VE_TGS_1 0x010
>> +#define VE_TGS_FIRST GENMASK(28, 16)
>> +#define VE_TGS_LAST GENMASK(12, 0)
>> +
>> +#define VE_SCALING_FACTOR 0x014
>> +#define VE_SCALING_FILTER0 0x018
>> +#define VE_SCALING_FILTER1 0x01c
>> +#define VE_SCALING_FILTER2 0x020
>> +#define VE_SCALING_FILTER3 0x024
>> +
>> +#define VE_CAP_WINDOW 0x030
>> +#define VE_COMP_WINDOW 0x034
>> +#define VE_COMP_PROC_OFFSET 0x038
>> +#define VE_COMP_OFFSET 0x03c
>> +#define VE_JPEG_ADDR 0x040
>> +#define VE_SRC0_ADDR 0x044
>> +#define VE_SRC_SCANLINE_OFFSET 0x048
>> +#define VE_SRC1_ADDR 0x04c
>> +#define VE_COMP_ADDR 0x054
>> +
>> +#define VE_STREAM_BUF_SIZE 0x058
>> +#define VE_STREAM_BUF_SIZE_N_PACKETS GENMASK(5, 3)
>> +#define VE_STREAM_BUF_SIZE_P_SIZE GENMASK(2, 0)
>> +
>> +#define VE_COMP_CTRL 0x060
>> +#define VE_COMP_CTRL_VQ_DCT_ONLY BIT(0)
>> +#define VE_COMP_CTRL_VQ_4COLOR BIT(1)
>> +#define VE_COMP_CTRL_QUANTIZE BIT(2)
>> +#define VE_COMP_CTRL_EN_BQ BIT(4)
>> +#define VE_COMP_CTRL_EN_CRYPTO BIT(5)
>> +#define VE_COMP_CTRL_DCT_CHR GENMASK(10, 6)
>> +#define VE_COMP_CTRL_DCT_LUM GENMASK(15, 11)
>> +#define VE_COMP_CTRL_EN_HQ BIT(16)
>> +#define VE_COMP_CTRL_RSVD BIT(19)
>> +#define VE_COMP_CTRL_ENCODE GENMASK(21, 20)
>> +#define VE_COMP_CTRL_HQ_DCT_CHR GENMASK(26, 22)
>> +#define VE_COMP_CTRL_HQ_DCT_LUM GENMASK(31, 27)
>> +
>> +#define VE_OFFSET_COMP_STREAM 0x078
>> +
>> +#define VE_SRC_LR_EDGE_DET 0x090
>> +#define VE_SRC_LR_EDGE_DET_LEFT GENMASK(11, 0)
>> +#define VE_SRC_LR_EDGE_DET_NO_V BIT(12)
>> +#define VE_SRC_LR_EDGE_DET_NO_H BIT(13)
>> +#define VE_SRC_LR_EDGE_DET_NO_DISP BIT(14)
>> +#define VE_SRC_LR_EDGE_DET_NO_CLK BIT(15)
>> +#define VE_SRC_LR_EDGE_DET_RT_SHF 16
>> +#define VE_SRC_LR_EDGE_DET_RT GENMASK(27, VE_SRC_LR_EDGE_DET_RT_SHF)
>> +#define VE_SRC_LR_EDGE_DET_INTERLACE BIT(31)
>> +
>> +#define VE_SRC_TB_EDGE_DET 0x094
>> +#define VE_SRC_TB_EDGE_DET_TOP GENMASK(12, 0)
>> +#define VE_SRC_TB_EDGE_DET_BOT_SHF 16
>> +#define VE_SRC_TB_EDGE_DET_BOT GENMASK(28, VE_SRC_TB_EDGE_DET_BOT_SHF)
>> +
>> +#define VE_MODE_DETECT_STATUS 0x098
>> +#define VE_MODE_DETECT_STATUS_VSYNC BIT(28)
>> +#define VE_MODE_DETECT_STATUS_HSYNC BIT(29)
>> +
>> +#define VE_INTERRUPT_CTRL 0x304
>> +#define VE_INTERRUPT_STATUS 0x308
>> +#define VE_INTERRUPT_MODE_DETECT_WD BIT(0)
>> +#define VE_INTERRUPT_CAPTURE_COMPLETE BIT(1)
>> +#define VE_INTERRUPT_COMP_READY BIT(2)
>> +#define VE_INTERRUPT_COMP_COMPLETE BIT(3)
>> +#define VE_INTERRUPT_MODE_DETECT BIT(4)
>> +#define VE_INTERRUPT_FRAME_COMPLETE BIT(5)
>> +#define VE_INTERRUPT_DECODE_ERR BIT(6)
>> +#define VE_INTERRUPT_HALT_READY BIT(8)
>> +#define VE_INTERRUPT_HANG_WD BIT(9)
>> +#define VE_INTERRUPT_STREAM_DESC BIT(10)
>> +#define VE_INTERRUPT_VSYNC_DESC BIT(11)
>> +
>> +#define VE_MODE_DETECT 0x30c
>> +#define VE_MEM_RESTRICT_START 0x310
>> +#define VE_MEM_RESTRICT_END 0x314
>> +
>> +enum {
>> + VIDEO_MODE_DETECT_DONE,
>> + VIDEO_RES_CHANGE,
>> + VIDEO_FRAME_AVAILABLE,
>> + VIDEO_FRAME_TRIGGERED,
>> +};
>> +
>> +struct aspeed_video_addr {
>> + dma_addr_t dma;
>> + void *virt;
>> +};
>> +
>> +struct aspeed_video {
>> + void __iomem *base;
>> + struct clk *eclk;
>> + struct clk *vclk;
>> + struct reset_control *rst;
>> +
>> + struct device *dev;
>> + struct v4l2_ctrl_handler v4l2_ctrl;
> Don't call this v4l2_ctrl. Most drivers just call this hdl or ctrl_handler.
>
>> + struct v4l2_device v4l2_dev;
>> + struct v4l2_format v4l2_fmt;
> You probably want to use v4l2_pix_format here, using the full v4l2_format
> struct is overkill.
>
>> + struct video_device vdev;
>> + struct mutex video_lock;
>> +
>> + atomic_t clients;
>> + wait_queue_head_t wait;
>> + struct delayed_work res_work;
>> + unsigned long flags;
>> +
>> + int frame_idx;
>> + u32 frame_size;
>> +
>> + dma_addr_t max;
>> + dma_addr_t min;
>> + struct aspeed_video_addr srcs[2];
>> + struct aspeed_video_addr comp[2];
>> + struct aspeed_video_addr jpeg;
>> +
>> + bool yuv420;
>> + int frame_rate;
>> + int jpeg_quality;
>> + unsigned int height;
>> + unsigned int width;
>> +};
>> +
>> +#define to_aspeed_video(x) container_of((x), struct aspeed_video, v4l2_dev)
>> +
>> +static const u32 aspeed_video_jpeg_header[ASPEED_VIDEO_JPEG_HEADER_SIZE] = {
>> + 0xE0FFD8FF, 0x464A1000, 0x01004649, 0x60000101, 0x00006000, 0x0F00FEFF,
>> + 0x00002D05, 0x00000000, 0x00000000, 0x00DBFF00
>> +};
>> +
>> +static const u32 aspeed_video_jpeg_quant[ASPEED_VIDEO_JPEG_QUANT_SIZE] = {
>> + 0x081100C0, 0x00000000, 0x00110103, 0x03011102, 0xC4FF0111, 0x00001F00,
>> + 0x01010501, 0x01010101, 0x00000000, 0x00000000, 0x04030201, 0x08070605,
>> + 0xFF0B0A09, 0x10B500C4, 0x03010200, 0x03040203, 0x04040505, 0x7D010000,
>> + 0x00030201, 0x12051104, 0x06413121, 0x07615113, 0x32147122, 0x08A19181,
>> + 0xC1B14223, 0xF0D15215, 0x72623324, 0x160A0982, 0x1A191817, 0x28272625,
>> + 0x35342A29, 0x39383736, 0x4544433A, 0x49484746, 0x5554534A, 0x59585756,
>> + 0x6564635A, 0x69686766, 0x7574736A, 0x79787776, 0x8584837A, 0x89888786,
>> + 0x9493928A, 0x98979695, 0xA3A29A99, 0xA7A6A5A4, 0xB2AAA9A8, 0xB6B5B4B3,
>> + 0xBAB9B8B7, 0xC5C4C3C2, 0xC9C8C7C6, 0xD4D3D2CA, 0xD8D7D6D5, 0xE2E1DAD9,
>> + 0xE6E5E4E3, 0xEAE9E8E7, 0xF4F3F2F1, 0xF8F7F6F5, 0xC4FFFAF9, 0x00011F00,
>> + 0x01010103, 0x01010101, 0x00000101, 0x00000000, 0x04030201, 0x08070605,
>> + 0xFF0B0A09, 0x11B500C4, 0x02010200, 0x04030404, 0x04040507, 0x77020100,
>> + 0x03020100, 0x21050411, 0x41120631, 0x71610751, 0x81322213, 0x91421408,
>> + 0x09C1B1A1, 0xF0523323, 0xD1726215, 0x3424160A, 0x17F125E1, 0x261A1918,
>> + 0x2A292827, 0x38373635, 0x44433A39, 0x48474645, 0x54534A49, 0x58575655,
>> + 0x64635A59, 0x68676665, 0x74736A69, 0x78777675, 0x83827A79, 0x87868584,
>> + 0x928A8988, 0x96959493, 0x9A999897, 0xA5A4A3A2, 0xA9A8A7A6, 0xB4B3B2AA,
>> + 0xB8B7B6B5, 0xC3C2BAB9, 0xC7C6C5C4, 0xD2CAC9C8, 0xD6D5D4D3, 0xDAD9D8D7,
>> + 0xE5E4E3E2, 0xE9E8E7E6, 0xF4F3F2EA, 0xF8F7F6F5, 0xDAFFFAF9, 0x01030C00,
>> + 0x03110200, 0x003F0011
>> +};
>> +
>> +static const u32 aspeed_video_jpeg_dct[ASPEED_VIDEO_JPEG_NUM_QUALITIES]
>> + [ASPEED_VIDEO_JPEG_DCT_SIZE] = {
>> + { 0x0D140043, 0x0C0F110F, 0x11101114, 0x17141516, 0x1E20321E,
>> + 0x3D1E1B1B, 0x32242E2B, 0x4B4C3F48, 0x44463F47, 0x61735A50,
>> + 0x566C5550, 0x88644644, 0x7A766C65, 0x4D808280, 0x8C978D60,
>> + 0x7E73967D, 0xDBFF7B80, 0x1F014300, 0x272D2121, 0x3030582D,
>> + 0x697BB958, 0xB8B9B97B, 0xB9B8A6A6, 0xB9B9B9B9, 0xB9B9B9B9,
>> + 0xB9B9B9B9, 0xB9B9B9B9, 0xB9B9B9B9, 0xB9B9B9B9, 0xB9B9B9B9,
>> + 0xB9B9B9B9, 0xB9B9B9B9, 0xB9B9B9B9, 0xFFB9B9B9 },
>> + { 0x0C110043, 0x0A0D0F0D, 0x0F0E0F11, 0x14111213, 0x1A1C2B1A,
>> + 0x351A1818, 0x2B1F2826, 0x4142373F, 0x3C3D373E, 0x55644E46,
>> + 0x4B5F4A46, 0x77573D3C, 0x6B675F58, 0x43707170, 0x7A847B54,
>> + 0x6E64836D, 0xDBFF6C70, 0x1B014300, 0x22271D1D, 0x2A2A4C27,
>> + 0x5B6BA04C, 0xA0A0A06B, 0xA0A0A0A0, 0xA0A0A0A0, 0xA0A0A0A0,
>> + 0xA0A0A0A0, 0xA0A0A0A0, 0xA0A0A0A0, 0xA0A0A0A0, 0xA0A0A0A0,
>> + 0xA0A0A0A0, 0xA0A0A0A0, 0xA0A0A0A0, 0xFFA0A0A0 },
>> + { 0x090E0043, 0x090A0C0A, 0x0C0B0C0E, 0x110E0F10, 0x15172415,
>> + 0x2C151313, 0x241A211F, 0x36372E34, 0x31322E33, 0x4653413A,
>> + 0x3E4E3D3A, 0x62483231, 0x58564E49, 0x385D5E5D, 0x656D6645,
>> + 0x5B536C5A, 0xDBFF595D, 0x16014300, 0x1C201818, 0x22223F20,
>> + 0x4B58853F, 0x85858558, 0x85858585, 0x85858585, 0x85858585,
>> + 0x85858585, 0x85858585, 0x85858585, 0x85858585, 0x85858585,
>> + 0x85858585, 0x85858585, 0x85858585, 0xFF858585 },
>> + { 0x070B0043, 0x07080A08, 0x0A090A0B, 0x0D0B0C0C, 0x11121C11,
>> + 0x23110F0F, 0x1C141A19, 0x2B2B2429, 0x27282428, 0x3842332E,
>> + 0x313E302E, 0x4E392827, 0x46443E3A, 0x2C4A4A4A, 0x50565137,
>> + 0x48425647, 0xDBFF474A, 0x12014300, 0x161A1313, 0x1C1C331A,
>> + 0x3D486C33, 0x6C6C6C48, 0x6C6C6C6C, 0x6C6C6C6C, 0x6C6C6C6C,
>> + 0x6C6C6C6C, 0x6C6C6C6C, 0x6C6C6C6C, 0x6C6C6C6C, 0x6C6C6C6C,
>> + 0x6C6C6C6C, 0x6C6C6C6C, 0x6C6C6C6C, 0xFF6C6C6C },
>> + { 0x06090043, 0x05060706, 0x07070709, 0x0A09090A, 0x0D0E160D,
>> + 0x1B0D0C0C, 0x16101413, 0x21221C20, 0x1E1F1C20, 0x2B332824,
>> + 0x26302624, 0x3D2D1F1E, 0x3735302D, 0x22393A39, 0x3F443F2B,
>> + 0x38334338, 0xDBFF3739, 0x0D014300, 0x11130E0E, 0x15152613,
>> + 0x2D355026, 0x50505035, 0x50505050, 0x50505050, 0x50505050,
>> + 0x50505050, 0x50505050, 0x50505050, 0x50505050, 0x50505050,
>> + 0x50505050, 0x50505050, 0x50505050, 0xFF505050 },
>> + { 0x04060043, 0x03040504, 0x05040506, 0x07060606, 0x09090F09,
>> + 0x12090808, 0x0F0A0D0D, 0x16161315, 0x14151315, 0x1D221B18,
>> + 0x19201918, 0x281E1514, 0x2423201E, 0x17262726, 0x2A2D2A1C,
>> + 0x25222D25, 0xDBFF2526, 0x09014300, 0x0B0D0A0A, 0x0E0E1A0D,
>> + 0x1F25371A, 0x37373725, 0x37373737, 0x37373737, 0x37373737,
>> + 0x37373737, 0x37373737, 0x37373737, 0x37373737, 0x37373737,
>> + 0x37373737, 0x37373737, 0x37373737, 0xFF373737 },
>> + { 0x02030043, 0x01020202, 0x02020203, 0x03030303, 0x04040704,
>> + 0x09040404, 0x07050606, 0x0B0B090A, 0x0A0A090A, 0x0E110D0C,
>> + 0x0C100C0C, 0x140F0A0A, 0x1211100F, 0x0B131313, 0x1516150E,
>> + 0x12111612, 0xDBFF1213, 0x04014300, 0x05060505, 0x07070D06,
>> + 0x0F121B0D, 0x1B1B1B12, 0x1B1B1B1B, 0x1B1B1B1B, 0x1B1B1B1B,
>> + 0x1B1B1B1B, 0x1B1B1B1B, 0x1B1B1B1B, 0x1B1B1B1B, 0x1B1B1B1B,
>> + 0x1B1B1B1B, 0x1B1B1B1B, 0x1B1B1B1B, 0xFF1B1B1B },
>> + { 0x01020043, 0x01010101, 0x01010102, 0x02020202, 0x03030503,
>> + 0x06030202, 0x05030404, 0x07070607, 0x06070607, 0x090B0908,
>> + 0x080A0808, 0x0D0A0706, 0x0C0B0A0A, 0x070C0D0C, 0x0E0F0E09,
>> + 0x0C0B0F0C, 0xDBFF0C0C, 0x03014300, 0x03040303, 0x04040804,
>> + 0x0A0C1208, 0x1212120C, 0x12121212, 0x12121212, 0x12121212,
>> + 0x12121212, 0x12121212, 0x12121212, 0x12121212, 0x12121212,
>> + 0x12121212, 0x12121212, 0x12121212, 0xFF121212 },
>> + { 0x01020043, 0x01010101, 0x01010102, 0x02020202, 0x03030503,
>> + 0x06030202, 0x05030404, 0x07070607, 0x06070607, 0x090B0908,
>> + 0x080A0808, 0x0D0A0706, 0x0C0B0A0A, 0x070C0D0C, 0x0E0F0E09,
>> + 0x0C0B0F0C, 0xDBFF0C0C, 0x02014300, 0x03030202, 0x04040703,
>> + 0x080A0F07, 0x0F0F0F0A, 0x0F0F0F0F, 0x0F0F0F0F, 0x0F0F0F0F,
>> + 0x0F0F0F0F, 0x0F0F0F0F, 0x0F0F0F0F, 0x0F0F0F0F, 0x0F0F0F0F,
>> + 0x0F0F0F0F, 0x0F0F0F0F, 0x0F0F0F0F, 0xFF0F0F0F },
>> + { 0x01010043, 0x01010101, 0x01010101, 0x01010101, 0x02020302,
>> + 0x04020202, 0x03020303, 0x05050405, 0x05050405, 0x07080606,
>> + 0x06080606, 0x0A070505, 0x09080807, 0x05090909, 0x0A0B0A07,
>> + 0x09080B09, 0xDBFF0909, 0x02014300, 0x02030202, 0x03030503,
>> + 0x07080C05, 0x0C0C0C08, 0x0C0C0C0C, 0x0C0C0C0C, 0x0C0C0C0C,
>> + 0x0C0C0C0C, 0x0C0C0C0C, 0x0C0C0C0C, 0x0C0C0C0C, 0x0C0C0C0C,
>> + 0x0C0C0C0C, 0x0C0C0C0C, 0x0C0C0C0C, 0xFF0C0C0C },
>> + { 0x01010043, 0x01010101, 0x01010101, 0x01010101, 0x01010201,
>> + 0x03010101, 0x02010202, 0x03030303, 0x03030303, 0x04050404,
>> + 0x04050404, 0x06050303, 0x06050505, 0x03060606, 0x07070704,
>> + 0x06050706, 0xDBFF0606, 0x01014300, 0x01020101, 0x02020402,
>> + 0x05060904, 0x09090906, 0x09090909, 0x09090909, 0x09090909,
>> + 0x09090909, 0x09090909, 0x09090909, 0x09090909, 0x09090909,
>> + 0x09090909, 0x09090909, 0x09090909, 0xFF090909 },
>> + { 0x01010043, 0x01010101, 0x01010101, 0x01010101, 0x01010101,
>> + 0x01010101, 0x01010101, 0x01010101, 0x01010101, 0x02020202,
>> + 0x02020202, 0x03020101, 0x03020202, 0x01030303, 0x03030302,
>> + 0x03020303, 0xDBFF0403, 0x01014300, 0x01010101, 0x01010201,
>> + 0x03040602, 0x06060604, 0x06060606, 0x06060606, 0x06060606,
>> + 0x06060606, 0x06060606, 0x06060606, 0x06060606, 0x06060606,
>> + 0x06060606, 0x06060606, 0x06060606, 0xFF060606 }
>> +};
>> +
>> +static void aspeed_video_init_jpeg_table(u32 *table, bool yuv420)
>> +{
>> + int i;
>> + unsigned int base;
>> +
>> + for (i = 0; i < ASPEED_VIDEO_JPEG_NUM_QUALITIES; i++) {
>> + base = 256 * i; /* AST HW requires this header spacing */
>> + memcpy(&table[base], aspeed_video_jpeg_header,
>> + sizeof(aspeed_video_jpeg_header));
>> +
>> + base += ASPEED_VIDEO_JPEG_HEADER_SIZE;
>> + memcpy(&table[base], aspeed_video_jpeg_dct[i],
>> + sizeof(aspeed_video_jpeg_dct[i]));
>> +
>> + base += ASPEED_VIDEO_JPEG_DCT_SIZE;
>> + memcpy(&table[base], aspeed_video_jpeg_quant,
>> + sizeof(aspeed_video_jpeg_quant));
>> +
>> + if (yuv420)
>> + table[base + 2] = 0x00220103;
>> + }
>> +}
>> +
>> +static void aspeed_video_update(struct aspeed_video *video, u32 reg,
>> + unsigned long mask, u32 bits)
>> +{
>> + u32 t = readl(video->base + reg);
>> + u32 before = t;
>> +
>> + t &= mask;
>> + t |= bits;
>> + writel(t, video->base + reg);
>> + dev_dbg(video->dev, "update %03x[%08x -> %08x]\n", reg, before,
>> + readl(video->base + reg));
>> +}
>> +
>> +static u32 aspeed_video_read(struct aspeed_video *video, u32 reg)
>> +{
>> + u32 t = readl(video->base + reg);
>> +
>> + dev_dbg(video->dev, "read %03x[%08x]\n", reg, t);
>> + return t;
>> +}
>> +
>> +static void aspeed_video_write(struct aspeed_video *video, u32 reg, u32 val)
>> +{
>> + writel(val, video->base + reg);
>> + dev_dbg(video->dev, "write %03x[%08x]\n", reg,
>> + readl(video->base + reg));
>> +}
>> +
>> +static bool aspeed_video_engine_busy(struct aspeed_video *video)
>> +{
>> + u32 seq_ctrl = aspeed_video_read(video, VE_SEQ_CTRL);
>> +
>> + if (!(seq_ctrl & VE_SEQ_CTRL_COMP_BUSY) ||
>> + !(seq_ctrl & VE_SEQ_CTRL_CAP_BUSY)) {
>> + dev_info(video->dev, "video engine busy\n");
>> + return true;
>> + }
>> +
>> + return false;
>> +}
>> +
>> +static int aspeed_video_start_frame(struct aspeed_video *video)
>> +{
>> + if (aspeed_video_engine_busy(video))
>> + return -EBUSY;
>> +
>> + video->frame_idx = (video->frame_idx + 1) % 2;
>> +
>> + aspeed_video_write(video, VE_COMP_PROC_OFFSET, 0);
>> + aspeed_video_write(video, VE_COMP_OFFSET, 0);
>> + aspeed_video_write(video, VE_COMP_ADDR,
>> + video->comp[video->frame_idx].dma);
>> +
>> + set_bit(VIDEO_FRAME_TRIGGERED, &video->flags);
>> +
>> + aspeed_video_update(video, VE_INTERRUPT_CTRL, 0xFFFFFFFF,
>> + VE_INTERRUPT_COMP_COMPLETE |
>> + VE_INTERRUPT_CAPTURE_COMPLETE);
>> +
>> + aspeed_video_update(video, VE_SEQ_CTRL, 0xFFFFFFFF,
>> + VE_SEQ_CTRL_TRIG_CAPTURE | VE_SEQ_CTRL_TRIG_COMP);
>> +
>> + return 0;
>> +}
>> +
>> +static void aspeed_video_start_mode_detect(struct aspeed_video *video)
>> +{
>> + /* Enable mode detect interrupts */
>> + aspeed_video_update(video, VE_INTERRUPT_CTRL, 0xFFFFFFFF,
>> + VE_INTERRUPT_MODE_DETECT);
>> +
>> + /* Trigger mode detect */
>> + aspeed_video_update(video, VE_SEQ_CTRL, 0xFFFFFFFF,
>> + VE_SEQ_CTRL_TRIG_MODE_DET);
>> +}
>> +
>> +static void aspeed_video_disable_mode_detect(struct aspeed_video *video)
>> +{
>> + /* Disable mode detect interrupts */
>> + aspeed_video_update(video, VE_INTERRUPT_CTRL,
>> + ~VE_INTERRUPT_MODE_DETECT, 0);
>> +
>> + /* Disable mode detect */
>> + aspeed_video_update(video, VE_SEQ_CTRL, ~VE_SEQ_CTRL_TRIG_MODE_DET, 0);
>> +}
>> +
>> +static void aspeed_video_off(struct aspeed_video *video)
>> +{
>> + /* Reset the engine */
>> + reset_control_assert(video->rst);
>> + udelay(100);
>> + reset_control_deassert(video->rst);
>> +
>> + /* Turn off the relevant clocks */
>> + clk_disable_unprepare(video->vclk);
>> + clk_disable_unprepare(video->eclk);
>> +}
>> +
>> +static void aspeed_video_on(struct aspeed_video *video)
>> +{
>> + /* Turn on the relevant clocks */
>> + clk_prepare_enable(video->eclk);
>> + clk_prepare_enable(video->vclk);
>> +
>> + /* Reset the engine */
>> + reset_control_assert(video->rst);
>> + udelay(100);
>> + reset_control_deassert(video->rst);
>> +}
>> +
>> +static irqreturn_t aspeed_video_irq(int irq, void *arg)
>> +{
>> + struct aspeed_video *video = arg;
>> + u32 sts = aspeed_video_read(video, VE_INTERRUPT_STATUS);
>> +
>> + if (atomic_read(&video->clients) == 0) {
>> + dev_info(video->dev, "irq with no client; disabling irqs\n");
>> +
>> + aspeed_video_write(video, VE_INTERRUPT_CTRL, 0);
>> + aspeed_video_write(video, VE_INTERRUPT_STATUS, 0xFFFFFFFF);
>> + return IRQ_HANDLED;
>> + }
>> +
>> + /* Resolution changed; reset entire engine and reinitialize */
>> + if (sts & VE_INTERRUPT_MODE_DETECT_WD) {
>> + dev_info(video->dev, "resolution changed; resetting\n");
>> + set_bit(VIDEO_RES_CHANGE, &video->flags);
>> +
>> + aspeed_video_off(video);
>> +
>> + schedule_delayed_work(&video->res_work,
>> + RESOLUTION_CHANGE_DELAY);
>> + return IRQ_HANDLED;
>> + }
>> +
>> + if (sts & VE_INTERRUPT_MODE_DETECT) {
>> + aspeed_video_update(video, VE_INTERRUPT_CTRL,
>> + ~VE_INTERRUPT_MODE_DETECT, 0);
>> + aspeed_video_write(video, VE_INTERRUPT_STATUS,
>> + VE_INTERRUPT_MODE_DETECT);
>> +
>> + set_bit(VIDEO_MODE_DETECT_DONE, &video->flags);
>> + wake_up_interruptible_all(&video->wait);
>> + }
>> +
>> + if ((sts & VE_INTERRUPT_COMP_COMPLETE) &&
>> + (sts & VE_INTERRUPT_CAPTURE_COMPLETE)) {
>> + video->frame_size = aspeed_video_read(video,
>> + VE_OFFSET_COMP_STREAM);
>> +
>> + aspeed_video_update(video, VE_INTERRUPT_CTRL,
>> + ~(VE_INTERRUPT_COMP_COMPLETE |
>> + VE_INTERRUPT_CAPTURE_COMPLETE), 0);
>> + aspeed_video_write(video, VE_INTERRUPT_STATUS,
>> + VE_INTERRUPT_COMP_COMPLETE |
>> + VE_INTERRUPT_CAPTURE_COMPLETE);
>> + aspeed_video_update(video, VE_SEQ_CTRL,
>> + ~(VE_SEQ_CTRL_TRIG_CAPTURE |
>> + VE_SEQ_CTRL_FORCE_IDLE |
>> + VE_SEQ_CTRL_TRIG_COMP), 0);
>> +
>> + set_bit(VIDEO_FRAME_AVAILABLE, &video->flags);
>> + clear_bit(VIDEO_FRAME_TRIGGERED, &video->flags);
>> + wake_up_interruptible_all(&video->wait);
>> + }
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> +static void aspeed_video_check_polarity(struct aspeed_video *video)
>> +{
>> + int i;
>> + int hsync_counter = 0;
>> + int vsync_counter = 0;
>> + u32 sts;
>> +
>> + for (i = 0; i < NUM_POLARITY_CHECKS; ++i) {
>> + sts = aspeed_video_read(video, VE_MODE_DETECT_STATUS);
>> + if (sts & VE_MODE_DETECT_STATUS_VSYNC)
>> + vsync_counter--;
>> + else
>> + vsync_counter++;
>> +
>> + if (sts & VE_MODE_DETECT_STATUS_HSYNC)
>> + hsync_counter--;
>> + else
>> + hsync_counter++;
>> + }
>> +
>> + if (hsync_counter < 0 || vsync_counter < 0) {
>> + u32 ctrl;
>> +
>> + if (hsync_counter < 0)
>> + ctrl = VE_CTRL_HSYNC_POL;
>> +
>> + if (vsync_counter < 0)
>> + ctrl = VE_CTRL_VSYNC_POL;
>> +
>> + aspeed_video_update(video, VE_CTRL, 0xFFFFFFFF, ctrl);
>> + }
>> +}
>> +
>> +#define res_check(v) test_and_clear_bit(VIDEO_MODE_DETECT_DONE, &(v)->flags)
>> +
>> +static int aspeed_video_get_resolution(struct aspeed_video *video)
>> +{
>> + bool invalid_resolution = true;
>> + int rc;
>> + int tries = 0;
>> + unsigned int bottom;
>> + unsigned int left;
>> + unsigned int right;
>> + unsigned int top;
>> + u32 src_lr_edge;
>> + u32 src_tb_edge;
>> +
>> + video->width = 0;
>> + video->height = 0;
>> +
>> + do {
>> + if (tries) {
>> + set_current_state(TASK_INTERRUPTIBLE);
>> + if (schedule_timeout(INVALID_RESOLUTION_DELAY))
>> + return -EINTR;
>> + }
>> +
>> + aspeed_video_start_mode_detect(video);
>> +
>> + rc = wait_event_interruptible_timeout(video->wait,
>> + res_check(video),
>> + MODE_DETECT_TIMEOUT);
>> + if (!rc) {
>> + dev_err(video->dev, "timed out on 1st mode detect\n");
>> + aspeed_video_disable_mode_detect(video);
>> + return -ETIME;
>> + }
>> +
>> + /* Disable mode detect in order to re-trigger */
>> + aspeed_video_update(video, VE_SEQ_CTRL,
>> + ~VE_SEQ_CTRL_TRIG_MODE_DET, 0);
>> +
>> + aspeed_video_check_polarity(video);
>> +
>> + aspeed_video_start_mode_detect(video);
>> +
>> + rc = wait_event_interruptible_timeout(video->wait,
>> + res_check(video),
>> + MODE_DETECT_TIMEOUT);
>> + if (!rc) {
>> + dev_err(video->dev, "timed out on 2nd mode detect\n");
>> + aspeed_video_disable_mode_detect(video);
>> + return -ETIME;
>> + }
>> +
>> + src_lr_edge = aspeed_video_read(video, VE_SRC_LR_EDGE_DET);
>> + src_tb_edge = aspeed_video_read(video, VE_SRC_TB_EDGE_DET);
>> +
>> + bottom = (src_tb_edge & VE_SRC_TB_EDGE_DET_BOT) >>
>> + VE_SRC_TB_EDGE_DET_BOT_SHF;
>> + top = src_tb_edge & VE_SRC_TB_EDGE_DET_TOP;
>> + if (top > bottom)
>> + continue;
>> +
>> + right = (src_lr_edge & VE_SRC_LR_EDGE_DET_RT) >>
>> + VE_SRC_LR_EDGE_DET_RT_SHF;
>> + left = src_lr_edge & VE_SRC_LR_EDGE_DET_LEFT;
>> + if (left > right)
>> + continue;
>> +
>> + invalid_resolution = false;
>> + } while (invalid_resolution && (tries++ < INVALID_RESOLUTION_RETRIES));
>> +
>> + if (invalid_resolution) {
>> + dev_err(video->dev, "invalid resolution detected\n");
>> + return -EMSGSIZE;
>> + }
>> +
>> + video->height = (bottom - top) + 1;
>> + video->width = (right - left) + 1;
>> +
>> + /* Don't use direct mode below 1024 x 768 (irqs don't fire) */
>> + if (video->height * video->width < DIRECT_FETCH_THRESHOLD) {
>> + aspeed_video_write(video, VE_TGS_0,
>> + FIELD_PREP(VE_TGS_FIRST, left - 1) |
>> + FIELD_PREP(VE_TGS_LAST, right));
>> + aspeed_video_write(video, VE_TGS_1,
>> + FIELD_PREP(VE_TGS_FIRST, top) |
>> + FIELD_PREP(VE_TGS_LAST, bottom + 1));
>> + aspeed_video_update(video, VE_CTRL,
>> + ~VE_CTRL_DIRECT_FETCH, VE_CTRL_INT_DE);
>> + }
>> +
>> + aspeed_video_write(video, VE_CAP_WINDOW,
>> + video->width << 16 | video->height);
>> + aspeed_video_write(video, VE_COMP_WINDOW,
>> + video->width << 16 | video->height);
>> + aspeed_video_write(video, VE_SRC_SCANLINE_OFFSET, video->width * 4);
>> +
>> + aspeed_video_update(video, VE_INTERRUPT_CTRL, 0xFFFFFFFF,
>> + VE_INTERRUPT_MODE_DETECT_WD);
>> + aspeed_video_update(video, VE_SEQ_CTRL, 0xFFFFFFFF,
>> + VE_SEQ_CTRL_EN_WATCHDOG);
>> +
>> + dev_dbg(video->dev, "got resolution[%dx%d]\n", video->width,
>> + video->height);
> This is where the DV_TIMINGS ioctls come in and the V4L2_EVENT_SOURCE_CHANGE
> event.
>
>> +
>> + return 0;
>> +}
>> +
>> +static void aspeed_video_init_regs(struct aspeed_video *video)
>> +{
>> + u32 comp_ctrl = VE_COMP_CTRL_RSVD |
>> + FIELD_PREP(VE_COMP_CTRL_DCT_LUM, video->jpeg_quality) |
>> + FIELD_PREP(VE_COMP_CTRL_DCT_CHR, video->jpeg_quality | 0x10);
>> + u32 ctrl = VE_CTRL_DIRECT_FETCH | VE_CTRL_AUTO_OR_CURSOR;
>> + u32 seq_ctrl = VE_SEQ_CTRL_AUTO_COMP | VE_SEQ_CTRL_JPEG_MODE;
>> +
>> + if (video->frame_rate)
>> + ctrl |= FIELD_PREP(VE_CTRL_FRC, video->frame_rate);
>> +
>> + if (video->yuv420)
>> + seq_ctrl |= VE_SEQ_CTRL_YUV420;
>> +
>> + /* Unlock VE registers */
>> + aspeed_video_write(video, VE_PROTECTION_KEY, VE_PROTECTION_KEY_UNLOCK);
>> +
>> + /* Disable interrupts */
>> + aspeed_video_write(video, VE_INTERRUPT_CTRL, 0);
>> + aspeed_video_write(video, VE_INTERRUPT_STATUS, 0xFFFFFFFF);
>> +
>> + /* Clear the offset */
>> + aspeed_video_write(video, VE_COMP_PROC_OFFSET, 0);
>> + aspeed_video_write(video, VE_COMP_OFFSET, 0);
>> +
>> + /* Set memory restrictions */
>> + aspeed_video_write(video, VE_MEM_RESTRICT_START, video->min);
>> + aspeed_video_write(video, VE_MEM_RESTRICT_END, video->max);
>> +
>> + /* Set buffer addresses */
>> + aspeed_video_write(video, VE_SRC0_ADDR, video->srcs[0].dma);
>> + aspeed_video_write(video, VE_SRC1_ADDR, video->srcs[1].dma);
>> + aspeed_video_write(video, VE_COMP_ADDR, video->comp[0].dma);
>> + aspeed_video_write(video, VE_JPEG_ADDR, video->jpeg.dma);
>> +
>> + /* Set control registers */
>> + aspeed_video_write(video, VE_SEQ_CTRL, seq_ctrl);
>> + aspeed_video_write(video, VE_CTRL, ctrl);
>> + aspeed_video_write(video, VE_COMP_CTRL, comp_ctrl);
>> +
>> + /* Compression buffer size; 128K packet * 8 packets */
>> + aspeed_video_write(video, VE_STREAM_BUF_SIZE, 0xf);
>> +
>> + /* Don't downscale */
>> + aspeed_video_write(video, VE_SCALING_FACTOR, 0x10001000);
>> + aspeed_video_write(video, VE_SCALING_FILTER0, 0x00200000);
>> + aspeed_video_write(video, VE_SCALING_FILTER1, 0x00200000);
>> + aspeed_video_write(video, VE_SCALING_FILTER2, 0x00200000);
>> + aspeed_video_write(video, VE_SCALING_FILTER3, 0x00200000);
>> +
>> + /* Set mode detection defaults */
>> + aspeed_video_write(video, VE_MODE_DETECT, 0x22666500);
>> +}
>> +
>> +static int aspeed_video_allocate_cma(struct aspeed_video *video)
>> +{
>> + video->srcs[0].virt = dma_alloc_coherent(video->dev,
>> + VE_SRC_BUFFER_SIZE,
>> + &video->srcs[0].dma,
>> + GFP_KERNEL);
>> + if (!video->srcs[0].virt) {
>> + dev_err(video->dev,
>> + "Failed to allocate source buffer 0, size[%x]\n",
>> + VE_SRC_BUFFER_SIZE);
>> + goto err;
>> + }
>> +
>> + video->srcs[1].virt = dma_alloc_coherent(video->dev,
>> + VE_SRC_BUFFER_SIZE,
>> + &video->srcs[1].dma,
>> + GFP_KERNEL);
>> + if (!video->srcs[1].virt) {
>> + dev_err(video->dev,
>> + "Failed to allocate source buffer 1, size[%x]\n",
>> + VE_SRC_BUFFER_SIZE);
>> + goto free_src0;
>> + }
>> +
>> + video->comp[0].virt = dma_alloc_coherent(video->dev,
>> + VE_COMP_BUFFER_SIZE,
>> + &video->comp[0].dma,
>> + GFP_KERNEL);
>> + if (!video->comp[0].virt) {
>> + dev_err(video->dev,
>> + "Failed to allocate compression buffer 0, size[%x]\n",
>> + VE_COMP_BUFFER_SIZE);
>> + goto free_src1;
>> + }
>> +
>> + video->comp[1].virt = dma_alloc_coherent(video->dev,
>> + VE_COMP_BUFFER_SIZE,
>> + &video->comp[1].dma,
>> + GFP_KERNEL);
>> + if (!video->comp[0].virt) {
>> + dev_err(video->dev,
>> + "Failed to allocate compression buffer 1, size[%x]\n",
>> + VE_COMP_BUFFER_SIZE);
>> + goto free_comp0;
>> + }
>> +
>> + video->jpeg.virt = dma_alloc_coherent(video->dev, VE_JPEG_BUFFER_SIZE,
>> + &video->jpeg.dma, GFP_KERNEL);
>> + if (!video->jpeg.virt) {
>> + dev_err(video->dev,
>> + "Failed to allocate JPEG buffer, size[%x]\n",
>> + VE_JPEG_BUFFER_SIZE);
>> + goto free_comp1;
>> + }
> It looks like the buffers are allocated for a worst-case scenario (1080p I think).
> So for smaller resolutions this wastes memory, but on the other hand you don't
> need to reallocate buffers when the resolution changes.
>
> Am I right?
That's correct. The other issue is that the buffers must be large enough
to capture the frame when detecting the resolution. So at the beginning,
they must be maximum size. I suppose once resolution is detected they
can be freed and re-allocated for the correct size.
>
>> +
>> + aspeed_video_init_jpeg_table(video->jpeg.virt, video->yuv420);
>> +
>> + /*
>> + * Calculate the memory restrictions. Don't consider the JPEG header
>> + * buffer since HW doesn't need to write to it.
>> + */
>> + video->max = max(video->srcs[0].dma + VE_SRC_BUFFER_SIZE,
>> + video->srcs[1].dma + VE_SRC_BUFFER_SIZE);
>> + video->max = max(video->max, video->comp[0].dma + VE_COMP_BUFFER_SIZE);
>> + video->max = max(video->max, video->comp[1].dma + VE_COMP_BUFFER_SIZE);
>> +
>> + video->min = min(video->srcs[0].dma, video->srcs[1].dma);
>> + video->min = min(video->min, video->comp[0].dma);
>> + video->min = min(video->min, video->comp[1].dma);
>> +
>> + return 0;
>> +
>> +free_comp1:
>> + dma_free_coherent(video->dev, VE_COMP_BUFFER_SIZE, video->comp[1].virt,
>> + video->comp[1].dma);
>> + video->comp[1].dma = 0ULL;
>> + video->comp[1].virt = NULL;
>> +
>> +free_comp0:
>> + dma_free_coherent(video->dev, VE_COMP_BUFFER_SIZE, video->comp[0].virt,
>> + video->comp[0].dma);
>> + video->comp[0].dma = 0ULL;
>> + video->comp[0].virt = NULL;
>> +
>> +free_src1:
>> + dma_free_coherent(video->dev, VE_SRC_BUFFER_SIZE, video->srcs[1].virt,
>> + video->srcs[1].dma);
>> + video->srcs[1].dma = 0ULL;
>> + video->srcs[1].virt = NULL;
>> +
>> +free_src0:
>> + dma_free_coherent(video->dev, VE_SRC_BUFFER_SIZE, video->srcs[0].virt,
>> + video->srcs[0].dma);
>> + video->srcs[0].dma = 0ULL;
>> + video->srcs[0].virt = NULL;
>> +err:
>> + return -ENOMEM;
>> +}
>> +
>> +static void aspeed_video_free_cma(struct aspeed_video *video)
>> +{
>> + dma_free_coherent(video->dev, VE_JPEG_BUFFER_SIZE, video->jpeg.virt,
>> + video->jpeg.dma);
>> + dma_free_coherent(video->dev, VE_COMP_BUFFER_SIZE, video->comp[1].virt,
>> + video->comp[1].dma);
>> + dma_free_coherent(video->dev, VE_COMP_BUFFER_SIZE, video->comp[0].virt,
>> + video->comp[0].dma);
>> + dma_free_coherent(video->dev, VE_SRC_BUFFER_SIZE, video->srcs[1].virt,
>> + video->srcs[1].dma);
>> + dma_free_coherent(video->dev, VE_SRC_BUFFER_SIZE, video->srcs[0].virt,
>> + video->srcs[0].dma);
>> +
>> + video->srcs[0].dma = 0ULL;
>> + video->srcs[0].virt = NULL;
>> + video->srcs[1].dma = 0ULL;
>> + video->srcs[1].virt = NULL;
>> + video->comp[0].dma = 0ULL;
>> + video->comp[0].virt = NULL;
>> + video->comp[1].dma = 0ULL;
>> + video->comp[1].virt = NULL;
>> + video->jpeg.dma = 0ULL;
>> + video->jpeg.virt = NULL;
>> +}
>> +
>> +static int aspeed_video_start(struct aspeed_video *video)
>> +{
>> + int rc = aspeed_video_allocate_cma(video);
>> +
>> + if (rc)
>> + return rc;
>> +
>> + aspeed_video_on(video);
>> +
>> + aspeed_video_init_regs(video);
>> +
>> + rc = aspeed_video_get_resolution(video);
>> + if (rc)
>> + aspeed_video_free_cma(video);
>> +
>> + video->v4l2_fmt.fmt.pix.width = video->width;
>> + video->v4l2_fmt.fmt.pix.height = video->height;
>> + video->v4l2_fmt.fmt.pix.sizeimage = video->width * video->height * 4;
> If you use JPEG compression, why is sizeimage set to the raw image size?
> That's for an extreme case where JPEG can't compress the image at all?
> But would this be too small in that situation since it doesn't have room
> for the JPEG header?
The size of the JPEG frame changes every frame, so this has to be set to
the worst-case. I'm not sure if there is any data that JPEG cannot
compress at all, but if that was the case then yes, the size would be
too small. As the driver currently sits though, it would be larger than
the "compressed frame" buffer long before that point though, so you'd
just end up with an incomplete JPEG.
>
>> +
>> + clear_bit(VIDEO_FRAME_TRIGGERED, &video->flags);
>> +
>> + return rc;
>> +}
>> +
>> +static void aspeed_video_stop(struct aspeed_video *video)
>> +{
>> + cancel_delayed_work_sync(&video->res_work);
>> +
>> + aspeed_video_off(video);
>> +
>> + aspeed_video_free_cma(video);
>> +
>> + clear_bit(VIDEO_FRAME_AVAILABLE, &video->flags);
>> +}
>> +
>> +static int aspeed_video_querycap(struct file *file, void *fh,
>> + struct v4l2_capability *cap)
>> +{
>> + strlcpy(cap->driver, DEVICE_NAME, sizeof(cap->driver));
>> + strlcpy(cap->card, "Aspeed Video Engine", sizeof(cap->card));
> Use strscpy instead of strlcpy (just rename).
>
> The plan is that strscpy will replace all strcpy, strncpy and strlcpy usages
> in the kernel.
Ah, must be a recent change, as you recommended strlcpy last week :)
>
>> + snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s",
>> + DEVICE_NAME);
>> +
>> + return 0;
>> +}
>> +
>> +static int aspeed_video_enum_format(struct file *file, void *fh,
>> + struct v4l2_fmtdesc *f)
>> +{
>> + if (f->index)
>> + return -EINVAL;
>> +
>> + f->pixelformat = V4L2_PIX_FMT_JPEG;
>> + strlcpy(f->description, "JPEG", sizeof(f->description));
> 1) use strscpy instead of strlcpy (a recent change).
> 2) drop this line altogether since it will be filled in for you by the V4L2 core.
>
>> + f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
>> + f->flags = V4L2_FMT_FLAG_COMPRESSED;
>> +
>> + return 0;
>> +}
>> +
>> +static int aspeed_video_get_format(struct file *file, void *fh,
>> + struct v4l2_format *f)
>> +{
>> + struct aspeed_video *video = video_drvdata(file);
>> +
>> + *f = video->v4l2_fmt;
>> +
>> + return 0;
>> +}
>> +
>> +static int aspeed_video_set_format(struct file *file, void *fh,
>> + struct v4l2_format *f)
>> +{
>> + struct aspeed_video *video = video_drvdata(file);
>> +
>> + if (f->fmt.pix.width == video->width)
>> + video->v4l2_fmt.fmt.pix.width = video->width;
>> +
>> + if (f->fmt.pix.height == video->height)
>> + video->v4l2_fmt.fmt.pix.height = video->height;
> What's the point of this? Just set aspeed_video_get_format as the
> callback for the g/s/try callbacks.
>
> The application cannot change the format at all, so doing that is
> fine.
>
>> +
>> + return aspeed_video_get_format(file, fh, f);
>> +}
>> +
>> +static int aspeed_video_try_format(struct file *file, void *fh,
>> + struct v4l2_format *f)
>> +{
>> + int rc;
>> + struct aspeed_video *video = video_drvdata(file);
>> + struct v4l2_pix_format pix = f->fmt.pix;
>> +
>> + rc = aspeed_video_get_format(file, fh, f);
>> + if (rc)
>> + return rc;
>> +
>> + if (pix.width == video->width)
>> + f->fmt.pix.width = video->width;
>> +
>> + if (pix.height == video->height)
>> + f->fmt.pix.height = video->height;
>> +
>> + return 0;
>> +}
>> +
>> +static int aspeed_video_enum_input(struct file *file, void *fh,
>> + struct v4l2_input *inp)
>> +{
>> + if (inp->index)
>> + return -EINVAL;
>> +
>> + strlcpy(inp->name, "Host VGA capture", sizeof(inp->name));
>> + inp->type = V4L2_INPUT_TYPE_CAMERA;
>> +
>> + return 0;
>> +}
>> +
>> +static int aspeed_video_get_input(struct file *file, void *fh, unsigned int *i)
>> +{
>> + *i = 0;
>> +
>> + return 0;
>> +}
>> +
>> +static int aspeed_video_set_input(struct file *file, void *fh, unsigned int i)
>> +{
>> + if (i)
>> + return -EINVAL;
>> +
>> + return 0;
>> +}
>> +
>> +static int aspeed_video_get_parm(struct file *file, void *fh,
>> + struct v4l2_streamparm *a)
>> +{
>> + struct aspeed_video *video = video_drvdata(file);
>> +
>> + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
> Just drop this line. It's checked by the v4l2 core for you.
>
>> + a->parm.capture.capability = V4L2_CAP_TIMEPERFRAME;
>> + a->parm.capture.timeperframe.numerator = 1;
>> + if (!video->frame_rate)
>> + a->parm.capture.timeperframe.denominator = MAX_FRAME_RATE + 1;
>> + else
>> + a->parm.capture.timeperframe.denominator = video->frame_rate;
>> +
>> + return 0;
>> +}
>> +
>> +static int aspeed_video_set_parm(struct file *file, void *fh,
>> + struct v4l2_streamparm *a)
>> +{
>> + int frame_rate;
> unsigned int.
>
>> + struct aspeed_video *video = video_drvdata(file);
>> +
>> + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
>> + return -EINVAL;
> Same here: just drop the check, it's not needed.
>
>> +
>> + a->parm.capture.capability = V4L2_CAP_TIMEPERFRAME;
>> +
>> + if (a->parm.capture.timeperframe.numerator) {
>> + frame_rate = a->parm.capture.timeperframe.denominator /
>> + a->parm.capture.timeperframe.numerator;
> frame_rate can be 0 if denominator is 0,
>
>> + } else {
>> + frame_rate = 0;
>> + a->parm.capture.timeperframe.numerator = 1;
> and then this isn't set to 1.
>
> v4l2-compliance was missing a test for this. I've added one, so I think it
> should now fail when run against this driver. Could you test that?
Well I had to do this to pass compliance actually, as it failed the test
if either denominator or numerator is 0...
>
>> + }
>> +
>> + if (frame_rate < 0 || frame_rate > MAX_FRAME_RATE)
>> + frame_rate = 0;
>> +
>> + if (!frame_rate)
>> + a->parm.capture.timeperframe.denominator = MAX_FRAME_RATE + 1;
> Why MAX_FRAME_RATE + 1 and not MAX_FRAME_RATE?
To get around compliance requiring non-zero and still preserving the
frame rate info; if it's greater than frame rate, it gets set to 0.
We need to be able to set a frame rate of 0, as that tells the engine,
"as fast as possible".
>
>> +
>> + if (video->frame_rate != frame_rate) {
>> + video->frame_rate = frame_rate;
>> + aspeed_video_update(video, VE_CTRL, ~VE_CTRL_FRC,
>> + FIELD_PREP(VE_CTRL_FRC, frame_rate));
> So the frame rate is set by userspace and is not related to the actual
> host graphics framerate?
Correct.
>
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int aspeed_video_enum_framesizes(struct file *file, void *fh,
>> + struct v4l2_frmsizeenum *fsize)
>> +{
>> + struct aspeed_video *video = video_drvdata(file);
>> +
>> + if (fsize->pixel_format != V4L2_PIX_FMT_JPEG)
>> + return -EINVAL;
>> +
>> + switch (fsize->index) {
>> + case 0:
>> + fsize->discrete.width = video->v4l2_fmt.fmt.pix.width;
>> + fsize->discrete.height = video->v4l2_fmt.fmt.pix.height;
>> + break;
>> + case 1:
>> + if (video->width == video->v4l2_fmt.fmt.pix.width &&
>> + video->height == video->v4l2_fmt.fmt.pix.height)
>> + return -EINVAL;
>> +
>> + fsize->discrete.width = video->width;
>> + fsize->discrete.height = video->height;
>> + break;
>> + default:
>> + return -EINVAL;
>> + }
>> +
>> + fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
>> +
>> + return 0;
>> +}
>> +
>> +static int aspeed_video_enum_frameintervals(struct file *file, void *fh,
>> + struct v4l2_frmivalenum *fival)
>> +{
>> + struct aspeed_video *video = video_drvdata(file);
>> +
>> + if (fival->index)
>> + return -EINVAL;
>> +
>> + if (fival->width != video->width || fival->height != video->height)
>> + return -EINVAL;
>> +
>> + if (fival->pixel_format != V4L2_PIX_FMT_JPEG)
>> + return -EINVAL;
>> +
>> + fival->type = V4L2_FRMIVAL_TYPE_CONTINUOUS;
>> +
>> + fival->stepwise.min.denominator = MAX_FRAME_RATE;
>> + fival->stepwise.min.numerator = 1;
>> + fival->stepwise.max.denominator = 1;
>> + fival->stepwise.max.numerator = 1;
>> + fival->stepwise.step = fival->stepwise.max;
>> +
>> + return 0;
>> +}
>> +
>> +static const struct v4l2_ioctl_ops aspeed_video_ioctl_ops = {
>> + .vidioc_querycap = aspeed_video_querycap,
>> + .vidioc_enum_fmt_vid_cap = aspeed_video_enum_format,
>> + .vidioc_g_fmt_vid_cap = aspeed_video_get_format,
>> + .vidioc_s_fmt_vid_cap = aspeed_video_set_format,
>> + .vidioc_try_fmt_vid_cap = aspeed_video_try_format,
>> + .vidioc_enum_input = aspeed_video_enum_input,
>> + .vidioc_g_input = aspeed_video_get_input,
>> + .vidioc_s_input = aspeed_video_set_input,
>> + .vidioc_g_parm = aspeed_video_get_parm,
>> + .vidioc_s_parm = aspeed_video_set_parm,
>> + .vidioc_enum_framesizes = aspeed_video_enum_framesizes,
>> + .vidioc_enum_frameintervals = aspeed_video_enum_frameintervals,
>> + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
>> + .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
>> +};
>> +
>> +static void aspeed_video_update_jpeg_quality(struct aspeed_video *video)
>> +{
>> + u32 comp_ctrl = FIELD_PREP(VE_COMP_CTRL_DCT_LUM, video->jpeg_quality) |
>> + FIELD_PREP(VE_COMP_CTRL_DCT_CHR, video->jpeg_quality | 0x10);
>> +
>> + aspeed_video_update(video, VE_COMP_CTRL,
>> + ~(VE_COMP_CTRL_DCT_LUM | VE_COMP_CTRL_DCT_CHR),
>> + comp_ctrl);
>> +}
>> +
>> +static void aspeed_video_update_subsampling(struct aspeed_video *video)
>> +{
>> + if (video->jpeg.virt)
>> + aspeed_video_init_jpeg_table(video->jpeg.virt, video->yuv420);
>> +
>> + if (video->yuv420)
>> + aspeed_video_update(video, VE_SEQ_CTRL, 0xFFFFFFFF,
>> + VE_SEQ_CTRL_YUV420);
>> + else
>> + aspeed_video_update(video, VE_SEQ_CTRL, ~VE_SEQ_CTRL_YUV420,
>> + 0);
>> +}
>> +
>> +static int aspeed_video_set_ctrl(struct v4l2_ctrl *ctrl)
>> +{
>> + struct aspeed_video *video = container_of(ctrl->handler,
>> + struct aspeed_video,
>> + v4l2_ctrl);
>> +
>> + switch (ctrl->id) {
>> + case V4L2_CID_JPEG_COMPRESSION_QUALITY:
>> + if (video->jpeg_quality != ctrl->val) {
> No need to check if the value is different: this is only called if the value is
> indeed different.
>
>> + video->jpeg_quality = ctrl->val;
>> + aspeed_video_update_jpeg_quality(video);
>> + }
>> + break;
>> + case V4L2_CID_JPEG_CHROMA_SUBSAMPLING:
>> + if (ctrl->val == V4L2_JPEG_CHROMA_SUBSAMPLING_420) {
>> + if (!video->yuv420) {
> Ditto.
>
>> + video->yuv420 = true;
>> + aspeed_video_update_subsampling(video);
>> + }
>> + } else {
>> + if (video->yuv420) {
>> + video->yuv420 = false;
>> + aspeed_video_update_subsampling(video);
>> + }
>> + }
>> + break;
>> + default:
>> + return -EINVAL;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static const struct v4l2_ctrl_ops aspeed_video_ctrl_ops = {
>> + .s_ctrl = aspeed_video_set_ctrl,
>> +};
>> +
>> +static void aspeed_video_resolution_work(struct work_struct *work)
>> +{
>> + int rc;
>> + struct delayed_work *dwork = to_delayed_work(work);
>> + struct aspeed_video *video = container_of(dwork, struct aspeed_video,
>> + res_work);
>> +
>> + /* No clients remaining after delay */
>> + if (atomic_read(&video->clients) == 0)
>> + goto done;
>> +
>> + aspeed_video_on(video);
>> +
>> + aspeed_video_init_regs(video);
>> +
>> + rc = aspeed_video_get_resolution(video);
>> + if (rc) {
>> + dev_err(video->dev,
>> + "resolution changed; couldn't get new resolution\n");
>> + } else {
>> + video->frame_idx = 0;
>> + clear_bit(VIDEO_FRAME_TRIGGERED, &video->flags);
>> + }
>> +
>> +done:
>> + clear_bit(VIDEO_RES_CHANGE, &video->flags);
>> + wake_up_interruptible_all(&video->wait);
>> +}
>> +
>> +static bool aspeed_video_frame_available(struct aspeed_video *video)
>> +{
>> + if (!test_and_clear_bit(VIDEO_FRAME_AVAILABLE, &video->flags)) {
>> + if (!test_bit(VIDEO_FRAME_TRIGGERED, &video->flags))
>> + aspeed_video_start_frame(video);
>> +
>> + return false;
>> + }
>> +
>> + return true;
>> +}
>> +
>> +static ssize_t aspeed_video_file_read(struct file *file, char __user *buf,
>> + size_t count, loff_t *ppos)
>> +{
>> + int rc;
>> + int fidx;
>> + size_t size;
>> + struct aspeed_video *video = video_drvdata(file);
>> +
>> + if (mutex_lock_interruptible(&video->video_lock))
>> + return -EINTR;
>> +
>> + if (file->f_flags & O_NONBLOCK) {
>> + if (!aspeed_video_frame_available(video)) {
>> + rc = -EAGAIN;
>> + goto unlock;
>> + } else {
>> + goto ready;
>> + }
>> + }
>> +
>> + rc = wait_event_interruptible(video->wait,
>> + aspeed_video_frame_available(video));
>> + if (rc) {
>> + rc = -EINTR;
>> + goto unlock;
>> + }
>> +
>> +ready:
>> + fidx = video->frame_idx;
>> + size = min_t(size_t, video->frame_size, count);
>> + aspeed_video_start_frame(video);
>> +
>> + if (copy_to_user(buf, video->comp[fidx].virt, size)) {
>> + rc = -EFAULT;
>> + goto unlock;
>> + }
>> +
>> + rc = size;
>> +
>> +unlock:
>> + mutex_unlock(&video->video_lock);
>> + return rc;
>> +}
>> +
>> +static int aspeed_video_open(struct file *file)
>> +{
>> + int rc;
>> + struct aspeed_video *video = video_drvdata(file);
>> +
>> + if (atomic_inc_return(&video->clients) == 1) {
>> + rc = aspeed_video_start(video);
>> + if (rc) {
>> + dev_err(video->dev, "Failed to start video engine\n");
>> + atomic_dec(&video->clients);
>> + return rc;
>> + }
>> + }
>> +
>> + return v4l2_fh_open(file);
>> +}
>> +
>> +static int aspeed_video_release(struct file *file)
>> +{
>> + int rc;
>> + struct aspeed_video *video = video_drvdata(file);
>> +
>> + rc = v4l2_fh_release(file);
>> +
>> + if (atomic_dec_return(&video->clients) == 0)
>> + aspeed_video_stop(video);
>> +
>> + return rc;
>> +}
>> +
>> +static const struct v4l2_file_operations aspeed_video_v4l2_fops = {
>> + .owner = THIS_MODULE,
>> + .read = aspeed_video_file_read,
>> + .poll = v4l2_ctrl_poll,
>> + .unlocked_ioctl = video_ioctl2,
>> + .open = aspeed_video_open,
>> + .release = aspeed_video_release,
>> +};
>> +
>> +static void aspeed_video_device_release(struct video_device *vdev)
>> +{
>> +}
>> +
>> +static int aspeed_video_setup_video(struct aspeed_video *video)
>> +{
>> + int rc;
>> + u64 mask = ~(BIT(V4L2_JPEG_CHROMA_SUBSAMPLING_444) |
>> + BIT(V4L2_JPEG_CHROMA_SUBSAMPLING_420));
>> + struct v4l2_device *v4l2_dev = &video->v4l2_dev;
>> + struct video_device *vdev = &video->vdev;
>> +
>> + rc = v4l2_device_register(video->dev, v4l2_dev);
>> + if (rc) {
>> + dev_err(video->dev, "Failed to register v4l2 device\n");
>> + return rc;
>> + }
>> +
>> + vdev->fops = &aspeed_video_v4l2_fops;
>> + vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE;
>> + vdev->v4l2_dev = v4l2_dev;
>> + strncpy(vdev->name, DEVICE_NAME, sizeof(vdev->name));
> strscpy
>
>> + vdev->vfl_type = VFL_TYPE_GRABBER;
>> + vdev->vfl_dir = VFL_DIR_RX;
>> + vdev->release = aspeed_video_device_release;
> Use the video_device_release_empty helper instead. Now you can drop aspeed_video_device_release.
>
>> + vdev->ioctl_ops = &aspeed_video_ioctl_ops;
>> + vdev->lock = &video->video_lock;
>> +
>> + video_set_drvdata(vdev, video);
>> + rc = video_register_device(vdev, VFL_TYPE_GRABBER, 0);
> This should be done last in probe(). After this call the video node appears and
> can be used by userspace, so everything must be fully initialized and that's
> not the case.
OK, gotcha.
>
>> + if (rc) {
>> + v4l2_device_unregister(v4l2_dev);
>> + dev_err(video->dev, "Failed to register video device\n");
>> + return rc;
>> + }
>> +
>> + video->v4l2_fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
>> + video->v4l2_fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_JPEG;
>> + video->v4l2_fmt.fmt.pix.field = V4L2_FIELD_NONE;
>> + video->v4l2_fmt.fmt.pix.colorspace = V4L2_COLORSPACE_JPEG;
> COLORSPACE_JPEG is deprecated. Use V4L2_COLORSPACE_SRGB for pix.colorspace
> and set pix.quantization to V4L2_QUANTIZATION_FULL_RANGE.
>
>> +
>> + /* Don't fail the probe if controls init fails */
>> + v4l2_ctrl_handler_init(&video->v4l2_ctrl, 2);
>> +
>> + v4l2_ctrl_new_std(&video->v4l2_ctrl, &aspeed_video_ctrl_ops,
>> + V4L2_CID_JPEG_COMPRESSION_QUALITY, 0,
>> + ASPEED_VIDEO_JPEG_NUM_QUALITIES - 1, 1, 0);
>> +
>> + v4l2_ctrl_new_std_menu(&video->v4l2_ctrl, &aspeed_video_ctrl_ops,
>> + V4L2_CID_JPEG_CHROMA_SUBSAMPLING,
>> + V4L2_JPEG_CHROMA_SUBSAMPLING_420, mask,
>> + V4L2_JPEG_CHROMA_SUBSAMPLING_444);
>> +
>> + if (video->v4l2_ctrl.error) {
>> + dev_info(video->dev, "Failed to init controls: %d\n",
>> + video->v4l2_ctrl.error);
>> + v4l2_ctrl_handler_free(&video->v4l2_ctrl);
> You really need to return an error here, you shouldn't continue.
Well, the JPEG controls aren't strictly necessary right? The driver will
operate fine with the default settings.
>
>> + } else {
>> + v4l2_dev->ctrl_handler = &video->v4l2_ctrl;
>> + vdev->ctrl_handler = &video->v4l2_ctrl;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int aspeed_video_init(struct aspeed_video *video)
>> +{
>> + int irq;
>> + int rc;
>> + struct device *dev = video->dev;
>> +
>> + irq = irq_of_parse_and_map(dev->of_node, 0);
>> + if (!irq) {
>> + dev_err(dev, "Unable to find IRQ\n");
>> + return -ENODEV;
>> + }
>> +
>> + rc = devm_request_irq(dev, irq, aspeed_video_irq, IRQF_SHARED,
>> + DEVICE_NAME, video);
>> + if (rc < 0) {
>> + dev_err(dev, "Unable to request IRQ %d\n", irq);
>> + return rc;
>> + }
>> +
>> + video->eclk = devm_clk_get(dev, "eclk");
>> + if (IS_ERR(video->eclk)) {
>> + dev_err(dev, "Unable to get ECLK\n");
>> + return PTR_ERR(video->eclk);
>> + }
>> +
>> + video->vclk = devm_clk_get(dev, "vclk");
>> + if (IS_ERR(video->vclk)) {
>> + dev_err(dev, "Unable to get VCLK\n");
>> + return PTR_ERR(video->vclk);
>> + }
>> +
>> + video->rst = devm_reset_control_get_exclusive(dev, NULL);
>> + if (IS_ERR(video->rst)) {
>> + dev_err(dev, "Unable to get VE reset\n");
>> + return PTR_ERR(video->rst);
>> + }
>> +
>> + rc = of_reserved_mem_device_init(dev);
>> + if (rc) {
>> + dev_err(dev, "Unable to reserve memory\n");
>> + return rc;
>> + }
>> +
>> + rc = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
>> + if (rc) {
>> + dev_err(dev, "Failed to set DMA mask\n");
>> + of_reserved_mem_device_release(dev);
>> + return rc;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int aspeed_video_probe(struct platform_device *pdev)
>> +{
>> + int rc;
>> + struct resource *res;
>> + struct aspeed_video *video = kzalloc(sizeof(*video), GFP_KERNEL);
>> +
>> + if (!video)
>> + return -ENOMEM;
>> +
>> + video->frame_rate = 30;
>> + video->dev = &pdev->dev;
>> + mutex_init(&video->video_lock);
>> + init_waitqueue_head(&video->wait);
>> + INIT_DELAYED_WORK(&video->res_work, aspeed_video_resolution_work);
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +
>> + video->base = devm_ioremap_resource(video->dev, res);
>> +
>> + if (IS_ERR(video->base))
>> + return PTR_ERR(video->base);
>> +
>> + rc = aspeed_video_init(video);
>> + if (rc)
>> + return rc;
>> +
>> + rc = aspeed_video_setup_video(video);
>> + if (rc)
>> + return rc;
>> +
>> + return 0;
>> +}
>> +
>> +static int aspeed_video_remove(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct v4l2_device *v4l2_dev = dev_get_drvdata(dev);
>> + struct aspeed_video *video = to_aspeed_video(v4l2_dev);
>> +
>> + if (video->vdev.ctrl_handler)
>> + v4l2_ctrl_handler_free(&video->v4l2_ctrl);
>> +
>> + video_unregister_device(&video->vdev);
>> +
>> + v4l2_device_unregister(v4l2_dev);
>> +
>> + of_reserved_mem_device_release(dev);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct of_device_id aspeed_video_of_match[] = {
>> + { .compatible = "aspeed,ast2400-video-engine" },
>> + { .compatible = "aspeed,ast2500-video-engine" },
>> + {}
>> +};
>> +MODULE_DEVICE_TABLE(of, aspeed_video_of_match);
>> +
>> +static struct platform_driver aspeed_video_driver = {
>> + .driver = {
>> + .name = DEVICE_NAME,
>> + .of_match_table = aspeed_video_of_match,
>> + },
>> + .probe = aspeed_video_probe,
>> + .remove = aspeed_video_remove,
>> +};
>> +
>> +module_platform_driver(aspeed_video_driver);
>> +
>> +MODULE_DESCRIPTION("ASPEED Video Engine Driver");
>> +MODULE_AUTHOR("Eddie James");
>> +MODULE_LICENSE("GPL v2");
>>
> I don't like the read() API here. It is not a real read() either since it assumes
> userspace reads full frames at a time. But if you read e.g. one byte at a time,
> then each byte is just the first byte of a different frame.
Yea...
>
> I think we need to figure out how to make the stream I/O version just as fast
> if not faster as the read() API.
OK, I'll see what I can do.
Thanks for the review!
Eddie
>
> Regards,
>
> Hans
>
Powered by blists - more mailing lists