[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1537021801-23896-5-git-send-email-anurag.kumar.vulisha@xilinx.com>
Date: Sat, 15 Sep 2018 19:59:57 +0530
From: Anurag Kumar Vulisha <anurag.kumar.vulisha@...inx.com>
To: <balbi@...nel.org>, <gregkh@...uxfoundation.org>
CC: <v.anuragkumar@...il.com>, <linux-usb@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <Thinh.Nguyen@...opsys.com>,
<apandey@...inx.com>,
Anurag Kumar Vulisha <anurag.kumar.vulisha@...inx.com>
Subject: [PATCH v5 4/8] usb: dwc3: implement stream transfer timeout
According to dwc3 databook when streams are used, it may be possible
for the host and device become out of sync, where device may wait for
host to issue prime transcation and host may wait for device to issue
erdy. To avoid such deadlock, timeout needs to be implemented. After
timeout occurs, device will first stop transfer and restart the transfer
again. This patch does the same.
Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vulisha@...inx.com>
Reviewed-by: Thinh Nguyen <thinhn@...opsys.com>
---
Changes in v5:
1. Removed dev_dbg prints as suggested by "Thinh Nguyen"
Chnages in v4:
1. Added description for stream timeout timer as suggested by
"Thinh Nguyen"
Changes in v3:
1. Added the changes suggested by "Thinh Nguyen"
Changes in v2:
1. Changed STREAM_TIMEOUT to STREAM_TIMEOUT_MS as suggested by
"Andy Shevchenko"
---
drivers/usb/dwc3/core.h | 7 +++++++
drivers/usb/dwc3/gadget.c | 43 +++++++++++++++++++++++++++++++++++++++++++
2 files changed, 50 insertions(+)
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 5bfb625..f62e8c4 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -633,6 +633,11 @@ struct dwc3_event_buffer {
#define DWC3_TRB_NUM 256
+/*
+ * Timeout value in msecs used by stream_timeout_timer when streams are enabled
+ */
+#define STREAM_TIMEOUT_MS 50
+
/**
* struct dwc3_ep - device side endpoint representation
* @endpoint: usb endpoint
@@ -656,6 +661,7 @@ struct dwc3_event_buffer {
* @name: a human readable name e.g. ep1out-bulk
* @direction: true for TX, false for RX
* @stream_capable: true when streams are enabled
+ * @stream_timeout_timer: timeout timer used by bulk streams
*/
struct dwc3_ep {
struct usb_ep endpoint;
@@ -705,6 +711,7 @@ struct dwc3_ep {
unsigned direction:1;
unsigned stream_capable:1;
+ struct timer_list stream_timeout_timer;
};
enum dwc3_phy {
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 13ea282..e18f9b9 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -254,6 +254,7 @@ int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned cmd, u32 param)
}
static int __dwc3_gadget_wakeup(struct dwc3 *dwc);
+static void stream_timeout_function(struct timer_list *arg);
/**
* dwc3_send_gadget_ep_cmd - issue an endpoint command
@@ -574,6 +575,17 @@ static int dwc3_gadget_set_ep_config(struct dwc3_ep *dep, unsigned int action)
| DWC3_DEPCFG_STREAM_EVENT_EN
| DWC3_DEPCFG_XFER_COMPLETE_EN;
dep->stream_capable = true;
+
+ /*
+ * When BULK streams are enabled it may be possible for the host
+ * and device become out of sync, where device may wait for host
+ * to issue prime transcation and host may wait for device to
+ * issue ERDY. To avoid such deadlock, timeout needs to be
+ * implemented. After timeout occurs, device will first stop
+ * transfer and restart the transfer again.
+ */
+ timer_setup(&dep->stream_timeout_timer,
+ stream_timeout_function, 0);
}
if (!usb_endpoint_xfer_control(desc))
@@ -730,6 +742,9 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
trace_dwc3_gadget_ep_disable(dep);
+ if (dep->stream_capable)
+ del_timer(&dep->stream_timeout_timer);
+
dwc3_remove_requests(dwc, dep);
/* make sure HW endpoint isn't stalled */
@@ -1257,6 +1272,12 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep)
return ret;
}
+ if (starting && dep->stream_capable) {
+ dep->stream_timeout_timer.expires = jiffies +
+ msecs_to_jiffies(STREAM_TIMEOUT_MS);
+ add_timer(&dep->stream_timeout_timer);
+ }
+
return 0;
}
@@ -2403,6 +2424,13 @@ static void dwc3_gadget_endpoint_transfer_in_progress(struct dwc3_ep *dep,
stop = true;
}
+ /*
+ * Delete the timer that was started in __dwc3_gadget_kick_transfer()
+ * for stream capable endpoints.
+ */
+ if (dep->stream_capable)
+ del_timer(&dep->stream_timeout_timer);
+
dwc3_gadget_ep_cleanup_completed_requests(dep, event, status);
if (stop) {
@@ -2487,6 +2515,9 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
}
break;
case DWC3_DEPEVT_STREAMEVT:
+ if (event->status == DEPEVT_STREAMEVT_FOUND)
+ del_timer(&dep->stream_timeout_timer);
+ break;
case DWC3_DEPEVT_RXTXFIFOEVT:
break;
}
@@ -2588,6 +2619,18 @@ static void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force)
}
}
+static void stream_timeout_function(struct timer_list *arg)
+{
+ struct dwc3_ep *dep = from_timer(dep, arg, stream_timeout_timer);
+ struct dwc3 *dwc = dep->dwc;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dwc->lock, flags);
+ dwc3_stop_active_transfer(dep, true);
+ __dwc3_gadget_kick_transfer(dep);
+ spin_unlock_irqrestore(&dwc->lock, flags);
+}
+
static void dwc3_clear_stall_all_ep(struct dwc3 *dwc)
{
u32 epnum;
--
2.1.1
Powered by blists - more mailing lists