[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20180916140546.264c4310@archlinux>
Date: Sun, 16 Sep 2018 14:05:46 +0100
From: Jonathan Cameron <jic23@...nel.org>
To: Matthias Kaehlcke <mka@...omium.org>
Cc: Andy Gross <andy.gross@...aro.org>,
David Brown <david.brown@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
Hartmut Knaack <knaack.h@....de>,
Lars-Peter Clausen <lars@...afoo.de>,
Peter Meerwald-Stadler <pmeerw@...erw.net>,
linux-arm-msm@...r.kernel.org, linux-soc@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-iio@...r.kernel.org,
Douglas Anderson <dianders@...omium.org>
Subject: Re: [PATCH v3 1/3] dt-bindings: iio: vadc: Fix documentation of
'reg'
On Mon, 10 Sep 2018 09:02:59 -0700
Matthias Kaehlcke <mka@...omium.org> wrote:
> The documentation of Qualcomm's SPMI PMIC voltage ADC claims that the
> 'reg' property consists of two values, the SPMI address and the length
> of the controller's registers. However the SPMI bus to which it is added
> specifies "#size-cells = <0>;". Remove the controller register length
> from the documentation of the field and the example.
>
> Signed-off-by: Matthias Kaehlcke <mka@...omium.org>
> Reviewed-by: Douglas Anderson <dianders@...omium.org>
> Reviewed-by: Rob Herring <robh@...nel.org>
I've already tidied this up and applied. It should hit linux-next
tomorrow.
Jonathan
> ---
> Changes in v3:
> - fixed separator in commit message
> - removed duplicate 'Signed-off-by' tag
>
> Changes in v2:
> - none
> ---
> Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
> index 0fb46137f936..d0c188e5c922 100644
> --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
> +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
> @@ -13,7 +13,7 @@ VADC node:
> - reg:
> Usage: required
> Value type: <prop-encoded-array>
> - Definition: VADC base address and length in the SPMI PMIC register map.
> + Definition: VADC base address in the SPMI PMIC register map.
>
> - #address-cells:
> Usage: required
> @@ -104,7 +104,7 @@ Example:
> /* VADC node */
> pmic_vadc: vadc@...0 {
> compatible = "qcom,spmi-vadc";
> - reg = <0x3100 0x100>;
> + reg = <0x3100>;
> interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
> #address-cells = <1>;
> #size-cells = <0>;
Powered by blists - more mailing lists