linux-kernel - [PATCH 4.14 057/126] ata: libahci: Allow reconfigure of DEVSLP register

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180917211708.207983842@linuxfoundation.org>
Date:   Tue, 18 Sep 2018 00:41:45 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org,
        Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>,
        Hans de Goede <hdegoede@...hat.com>,
        Tejun Heo <tj@...nel.org>,
        Sasha Levin <alexander.levin@...rosoft.com>
Subject: [PATCH 4.14 057/126] ata: libahci: Allow reconfigure of DEVSLP register

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>

[ Upstream commit 11c291461b6ea8d1195a96d6bba6673a94aacebc ]

There are two modes in which DEVSLP can be entered. The OS initiated or
hardware autonomous.

In hardware autonomous mode, BIOS configures the AHCI controller and the
device to enable DEVSLP. But they may not be ideal for all cases. So in
this case, OS should be able to reconfigure DEVSLP register.

Currently if the DEVSLP is already enabled, we can't set again as it will
simply return. There are some systems where the firmware is setting high
DITO by default, in this case we can't modify here to correct settings.
With the default in several seconds, we are not able to transition to
DEVSLP.

This change will allow reconfiguration of devslp register if DITO is
different.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@...hat.com>
Signed-off-by: Tejun Heo <tj@...nel.org>
Signed-off-by: Sasha Levin <alexander.levin@...rosoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 drivers/ata/libahci.c |   18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -2096,7 +2096,7 @@ static void ahci_set_aggressive_devslp(s
 	struct ahci_host_priv *hpriv = ap->host->private_data;
 	void __iomem *port_mmio = ahci_port_base(ap);
 	struct ata_device *dev = ap->link.device;
-	u32 devslp, dm, dito, mdat, deto;
+	u32 devslp, dm, dito, mdat, deto, dito_conf;
 	int rc;
 	unsigned int err_mask;
 
@@ -2120,8 +2120,15 @@ static void ahci_set_aggressive_devslp(s
 		return;
 	}
 
-	/* device sleep was already enabled */
-	if (devslp & PORT_DEVSLP_ADSE)
+	dm = (devslp & PORT_DEVSLP_DM_MASK) >> PORT_DEVSLP_DM_OFFSET;
+	dito = devslp_idle_timeout / (dm + 1);
+	if (dito > 0x3ff)
+		dito = 0x3ff;
+
+	dito_conf = (devslp >> PORT_DEVSLP_DITO_OFFSET) & 0x3FF;
+
+	/* device sleep was already enabled and same dito */
+	if ((devslp & PORT_DEVSLP_ADSE) && (dito_conf == dito))
 		return;
 
 	/* set DITO, MDAT, DETO and enable DevSlp, need to stop engine first */
@@ -2129,11 +2136,6 @@ static void ahci_set_aggressive_devslp(s
 	if (rc)
 		return;
 
-	dm = (devslp & PORT_DEVSLP_DM_MASK) >> PORT_DEVSLP_DM_OFFSET;
-	dito = devslp_idle_timeout / (dm + 1);
-	if (dito > 0x3ff)
-		dito = 0x3ff;
-
 	/* Use the nominal value 10 ms if the read MDAT is zero,
 	 * the nominal value of DETO is 20 ms.
 	 */