linux-kernel - [PATCH 4.18 001/158] i2c: xiic: Make the start and the byte count write atomic

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180917211710.463810485@linuxfoundation.org>
Date:   Tue, 18 Sep 2018 00:40:31 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org,
        Shubhrajyoti Datta <shubhrajyoti.datta@...inx.com>,
        Michal Simek <michal.simek@...inx.com>,
        Wolfram Sang <wsa@...-dreams.de>, stable@...nel.org
Subject: [PATCH 4.18 001/158] i2c: xiic: Make the start and the byte count write atomic

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shubhrajyoti Datta <shubhrajyoti.datta@...inx.com>

commit ae7304c3ea28a3ba47a7a8312c76c654ef24967e upstream.

Disable interrupts while configuring the transfer and enable them back.

We have below as the programming sequence
1. start and slave address
2. byte count and stop

In some customer platform there was a lot of interrupts between 1 and 2
and after slave address (around 7 clock cyles) if 2 is not executed
then the transaction is nacked.

To fix this case make the 2 writes atomic.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@...inx.com>
Signed-off-by: Michal Simek <michal.simek@...inx.com>
[wsa: added a newline for better readability]
Signed-off-by: Wolfram Sang <wsa@...-dreams.de>
Cc: stable@...nel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 drivers/i2c/busses/i2c-xiic.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -532,6 +532,7 @@ static void xiic_start_recv(struct xiic_
 {
 	u8 rx_watermark;
 	struct i2c_msg *msg = i2c->rx_msg = i2c->tx_msg;
+	unsigned long flags;
 
 	/* Clear and enable Rx full interrupt. */
 	xiic_irq_clr_en(i2c, XIIC_INTR_RX_FULL_MASK | XIIC_INTR_TX_ERROR_MASK);
@@ -547,6 +548,7 @@ static void xiic_start_recv(struct xiic_
 		rx_watermark = IIC_RX_FIFO_DEPTH;
 	xiic_setreg8(i2c, XIIC_RFD_REG_OFFSET, rx_watermark - 1);
 
+	local_irq_save(flags);
 	if (!(msg->flags & I2C_M_NOSTART))
 		/* write the address */
 		xiic_setreg16(i2c, XIIC_DTR_REG_OFFSET,
@@ -556,6 +558,8 @@ static void xiic_start_recv(struct xiic_
 
 	xiic_setreg16(i2c, XIIC_DTR_REG_OFFSET,
 		msg->len | ((i2c->nmsgs == 1) ? XIIC_TX_DYN_STOP_MASK : 0));
+	local_irq_restore(flags);
+
 	if (i2c->nmsgs == 1)
 		/* very last, enable bus not busy as well */
 		xiic_irq_clr_en(i2c, XIIC_INTR_BNB_MASK);