linux-kernel - Re: [PATCH v3 1/3] dt-bindings: i2c: designware: add optional gpio recovery properties

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20180917113228.43c9b8dc@xhacker.debian>
Date:   Mon, 17 Sep 2018 11:32:28 +0800
From:   Jisheng Zhang <Jisheng.Zhang@...aptics.com>
To:     Jarkko Nikula <jarkko.nikula@...ux.intel.com>,
        Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        Mika Westerberg <mika.westerberg@...ux.intel.com>,
        Wolfram Sang <wsa@...-dreams.de>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>
Cc:     linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
        <linux-i2c@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        devicetree@...r.kernel.org
Subject: Re: [PATCH v3 1/3] dt-bindings: i2c: designware: add optional gpio
 recovery properties

+ DT maintainers

On Mon, 17 Sep 2018 11:27:41 +0800
Jisheng Zhang <Jisheng.Zhang@...aptics.com> wrote:

> Document the scl-gpios and sda-gpios properties for bus recovery.
> 
> Signed-off-by: Jisheng Zhang <Jisheng.Zhang@...aptics.com>
> ---
>  Documentation/devicetree/bindings/i2c/i2c-designware.txt | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
> index fbb0a6d8b964..1d6a6a8061ba 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt
> +++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
> @@ -20,6 +20,10 @@ Optional properties :
>   - i2c-sda-falling-time-ns : should contain the SDA falling time in nanoseconds.
>     This value which is by default 300ns is used to compute the tHIGH period.
>  
> + - scl-gpios: specify the gpio of the SCL line for gpio recovery
> +
> + - sda-gpios: specify the gpio of the SDA line for gpio recovery
> +
>  Examples :
>  
>  	i2c@...00 {
> @@ -42,6 +46,8 @@ Examples :
>  		i2c-sda-hold-time-ns = <300>;
>  		i2c-sda-falling-time-ns = <300>;
>  		i2c-scl-falling-time-ns = <300>;
> +		scl-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
> +		sda-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
>  	};
>  
>  	i2c@...0000 {