[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1537194305-9243-4-git-send-email-manish.narani@xilinx.com>
Date: Mon, 17 Sep 2018 19:55:01 +0530
From: Manish Narani <manish.narani@...inx.com>
To: <robh+dt@...nel.org>, <mark.rutland@....com>, <bp@...en8.de>,
<mchehab@...nel.org>, <michal.simek@...inx.com>,
<manish.narani@...inx.com>, <leoyang.li@....com>,
<sudeep.holla@....com>, <amit.kucheria@...aro.org>
CC: <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-edac@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>
Subject: [PATCH v7 3/7] dt: bindings: Document ZynqMP DDRC in Synopsys documentation
Add information of ZynqMP DDRC which reports the single bit errors that
are corrected and the double bit errors that are detected.
Signed-off-by: Manish Narani <manish.narani@...inx.com>
Reviewed-by: Rob Herring <robh@...nel.org>
---
.../bindings/memory-controllers/synopsys.txt | 27 ++++++++++++++++++----
1 file changed, 22 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/memory-controllers/synopsys.txt b/Documentation/devicetree/bindings/memory-controllers/synopsys.txt
index a43d26d..9d32762 100644
--- a/Documentation/devicetree/bindings/memory-controllers/synopsys.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/synopsys.txt
@@ -1,15 +1,32 @@
Binding for Synopsys IntelliDDR Multi Protocol Memory Controller
-This controller has an optional ECC support in half-bus width (16-bit)
-configuration. The ECC controller corrects one bit error and detects
-two bit errors.
+The ZynqMP DDR ECC controller has an optional ECC support in 64-bit and 32-bit
+bus width configurations.
+
+The Zynq DDR ECC controller has an optional ECC support in half-bus width
+(16-bit) configuration.
+
+These both ECC controllers correct single bit ECC errors and detect double bit
+ECC errors.
Required properties:
- - compatible: Should be 'xlnx,zynq-ddrc-a05'
- - reg: Base address and size of the controllers memory area
+ - compatible: One of:
+ - 'xlnx,zynq-ddrc-a05' : Zynq DDR ECC controller
+ - 'xlnx,zynqmp-ddrc-2.40a' : ZynqMP DDR ECC controller
+ - reg: Should contain DDR controller registers location and length.
+
+Required properties for "xlnx,zynqmp-ddrc-2.40a":
+ - interrupts: Property with a value describing the interrupt number.
Example:
memory-controller@...06000 {
compatible = "xlnx,zynq-ddrc-a05";
reg = <0xf8006000 0x1000>;
};
+
+ mc: memory-controller@...70000 {
+ compatible = "xlnx,zynqmp-ddrc-2.40a";
+ reg = <0x0 0xfd070000 0x0 0x30000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 112 4>;
+ };
--
2.1.1
Powered by blists - more mailing lists