[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1537268144-21152-24-git-send-email-ludovic.Barre@st.com>
Date: Tue, 18 Sep 2018 12:55:40 +0200
From: Ludovic Barre <ludovic.Barre@...com>
To: Ulf Hansson <ulf.hansson@...aro.org>,
Rob Herring <robh+dt@...nel.org>
CC: Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...com>,
<benjamin.gaignard@...aro.org>, Gerald Baeza <gerald.baeza@...com>,
Loic Pallardy <loic.pallardy@...com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-mmc@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
Ludovic Barre <ludovic.barre@...com>
Subject: [PATCH V2 23/27] mmc: mmci: add variant property to request a reset
From: Ludovic Barre <ludovic.barre@...com>
Some variants could require a reset.
STM32 sdmmc variant needs to reset hardware block
during the power cycle procedure (for re-initialization)
Signed-off-by: Ludovic Barre <ludovic.barre@...com>
---
Documentation/devicetree/bindings/mmc/mmci.txt | 2 ++
drivers/mmc/host/mmci.c | 9 +++++++++
drivers/mmc/host/mmci.h | 4 ++++
3 files changed, 15 insertions(+)
diff --git a/Documentation/devicetree/bindings/mmc/mmci.txt b/Documentation/devicetree/bindings/mmc/mmci.txt
index 03796cf..e952707 100644
--- a/Documentation/devicetree/bindings/mmc/mmci.txt
+++ b/Documentation/devicetree/bindings/mmc/mmci.txt
@@ -11,6 +11,8 @@ Required properties:
- compatible : contains "arm,pl18x", "arm,primecell".
- vmmc-supply : phandle to the regulator device tree node, mentioned
as the VCC/VDD supply in the eMMC/SD specs.
+depend of variant:
+- resets : phandle to internal reset line.
Optional properties:
- arm,primecell-periphid : contains the PrimeCell Peripheral ID, it overrides
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index b1d5bc5..6b3c33f 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -37,6 +37,7 @@
#include <linux/pm_runtime.h>
#include <linux/types.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/reset.h>
#include <asm/div64.h>
#include <asm/io.h>
@@ -1854,6 +1855,14 @@ static int mmci_probe(struct amba_device *dev,
dev_dbg(mmc_dev(mmc), "clocking block at %u Hz\n", mmc->f_max);
+ if (variant->reset) {
+ host->rst = devm_reset_control_get_exclusive(&dev->dev, NULL);
+ if (IS_ERR(host->rst)) {
+ ret = PTR_ERR(host->rst);
+ goto clk_disable;
+ }
+ }
+
/* Get regulators and the supported OCR mask */
ret = mmc_regulator_get_supply(mmc);
if (ret)
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 7fd89b7..2d46a08 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -247,6 +247,7 @@ struct mmci_host;
* @start_err: bitmask identifying the STARTBITERR bit inside MMCISTATUS
* register.
* @opendrain: bitmask identifying the OPENDRAIN bit inside MMCIPOWER register
+ * @reset: true if variant has need reset signal.
*/
struct variant_data {
unsigned int clkreg;
@@ -285,6 +286,7 @@ struct variant_data {
bool qcom_dml;
bool reversed_irq_handling;
bool mmcimask1;
+ bool reset;
unsigned int irq_pio_mask;
u32 start_err;
u32 opendrain;
@@ -318,6 +320,8 @@ struct mmci_host {
struct clk *clk;
bool singleirq;
+ struct reset_control *rst;
+
spinlock_t lock;
unsigned int mclk;
--
2.7.4
Powered by blists - more mailing lists