| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1537367527-20773-2-git-send-email-jim2101024@gmail.com>
Date: Wed, 19 Sep 2018 10:31:56 -0400
From: Jim Quinlan <jim2101024@...il.com>
To: linux-kernel@...r.kernel.org
Cc: Florian Fainelli <f.fainelli@...il.com>,
Brian Norris <computersforpeace@...il.com>,
Gregory Fong <gregory.0xf0@...il.com>,
bcm-kernel-feedback-list@...adcom.com,
Doug Berger <opendmb@...il.com>,
Markus Mayer <mmayer@...adcom.com>,
Justin Chen <justinpopo6@...il.com>,
linux-arm-kernel@...ts.infradead.org, linux-pci@...r.kernel.org,
Christoph Hellwig <hch@....de>
Subject: [PATCH v5 01/12] soc: bcm: brcmstb: add memory API
From: Florian Fainelli <f.fainelli@...il.com>
This commit adds a memory API suitable for ascertaining the sizes of
each of the N memory controllers in a Broadcom STB chip. Its first
user will be the Broadcom STB PCIe root complex driver, which needs
to know these sizes to properly set up DMA mappings for inbound
regions.
We cannot use memblock here or anything like what Linux provides
because it collapses adjacent regions within a larger block, and here
we actually need per-memory controller addresses and sizes, which is
why we resort to manual DT parsing.
Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
---
drivers/soc/bcm/brcmstb/Makefile | 2 +-
drivers/soc/bcm/brcmstb/memory.c | 158 +++++++++++++++++++++++++++++++++++++++
include/soc/brcmstb/memory_api.h | 26 +++++++
3 files changed, 185 insertions(+), 1 deletion(-)
create mode 100644 drivers/soc/bcm/brcmstb/memory.c
create mode 100644 include/soc/brcmstb/memory_api.h
diff --git a/drivers/soc/bcm/brcmstb/Makefile b/drivers/soc/bcm/brcmstb/Makefile
index 01687c2..e4ccd3a 100644
--- a/drivers/soc/bcm/brcmstb/Makefile
+++ b/drivers/soc/bcm/brcmstb/Makefile
@@ -1,2 +1,2 @@
-obj-y += common.o biuctrl.o
+obj-y += common.o biuctrl.o memory.o
obj-$(CONFIG_BRCMSTB_PM) += pm/
diff --git a/drivers/soc/bcm/brcmstb/memory.c b/drivers/soc/bcm/brcmstb/memory.c
new file mode 100644
index 0000000..254783d
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/memory.c
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright © 2015-2017 Broadcom */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/libfdt.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/sizes.h>
+#include <soc/brcmstb/memory_api.h>
+
+/* Macro to help extract property data */
+#define DT_PROP_DATA_TO_U32(b, offs) (fdt32_to_cpu(*(u32 *)(b + offs)))
+
+/* Constants used when retrieving memc info */
+#define NUM_BUS_RANGES 10
+#define BUS_RANGE_ULIMIT_SHIFT 4
+#define BUS_RANGE_LLIMIT_SHIFT 4
+#define BUS_RANGE_PA_SHIFT 12
+
+enum {
+ BUSNUM_MCP0 = 0x4,
+ BUSNUM_MCP1 = 0x5,
+ BUSNUM_MCP2 = 0x6,
+};
+
+/*
+ * If the DT nodes are handy, determine which MEMC holds the specified
+ * physical address.
+ */
+#ifdef CONFIG_ARCH_BRCMSTB
+int __brcmstb_memory_phys_addr_to_memc(phys_addr_t pa, void __iomem *base)
+{
+ int memc = -1;
+ int i;
+
+ for (i = 0; i < NUM_BUS_RANGES; i++, base += 8) {
+ const u64 ulimit_raw = readl(base);
+ const u64 llimit_raw = readl(base + 4);
+ const u64 ulimit =
+ ((ulimit_raw >> BUS_RANGE_ULIMIT_SHIFT)
+ << BUS_RANGE_PA_SHIFT) | 0xfff;
+ const u64 llimit = (llimit_raw >> BUS_RANGE_LLIMIT_SHIFT)
+ << BUS_RANGE_PA_SHIFT;
+ const u32 busnum = (u32)(ulimit_raw & 0xf);
+
+ if (pa >= llimit && pa <= ulimit) {
+ if (busnum >= BUSNUM_MCP0 && busnum <= BUSNUM_MCP2) {
+ memc = busnum - BUSNUM_MCP0;
+ break;
+ }
+ }
+ }
+
+ return memc;
+}
+
+int brcmstb_memory_phys_addr_to_memc(phys_addr_t pa)
+{
+ int memc = -1;
+ struct device_node *np;
+ void __iomem *cpubiuctrl;
+
+ np = of_find_compatible_node(NULL, NULL, "brcm,brcmstb-cpu-biu-ctrl");
+ if (!np)
+ return memc;
+
+ cpubiuctrl = of_iomap(np, 0);
+ if (!cpubiuctrl)
+ goto cleanup;
+
+ memc = __brcmstb_memory_phys_addr_to_memc(pa, cpubiuctrl);
+ iounmap(cpubiuctrl);
+
+cleanup:
+ of_node_put(np);
+
+ return memc;
+}
+
+#elif defined(CONFIG_MIPS)
+int brcmstb_memory_phys_addr_to_memc(phys_addr_t pa)
+{
+ /* The logic here is fairly simple and hardcoded: if pa <= 0x5000_0000,
+ * then this is MEMC0, else MEMC1.
+ *
+ * For systems with 2GB on MEMC0, MEMC1 starts at 9000_0000, with 1GB
+ * on MEMC0, MEMC1 starts at 6000_0000.
+ */
+ if (pa >= 0x50000000ULL)
+ return 1;
+ else
+ return 0;
+}
+#endif
+
+u64 brcmstb_memory_memc_size(int memc)
+{
+ const void *fdt = initial_boot_params;
+ const int mem_offset = fdt_path_offset(fdt, "/memory");
+ int addr_cells = 1, size_cells = 1;
+ const struct fdt_property *prop;
+ int proplen, cellslen;
+ u64 memc_size = 0;
+ int i;
+
+ /* Get root size and address cells if specified */
+ prop = fdt_get_property(fdt, 0, "#size-cells", &proplen);
+ if (prop)
+ size_cells = DT_PROP_DATA_TO_U32(prop->data, 0);
+
+ prop = fdt_get_property(fdt, 0, "#address-cells", &proplen);
+ if (prop)
+ addr_cells = DT_PROP_DATA_TO_U32(prop->data, 0);
+
+ if (mem_offset < 0)
+ return -1;
+
+ prop = fdt_get_property(fdt, mem_offset, "reg", &proplen);
+ cellslen = (int)sizeof(u32) * (addr_cells + size_cells);
+ if ((proplen % cellslen) != 0)
+ return -1;
+
+ for (i = 0; i < proplen / cellslen; ++i) {
+ u64 addr = 0;
+ u64 size = 0;
+ int memc_idx;
+ int j;
+
+ for (j = 0; j < addr_cells; ++j) {
+ int offset = (cellslen * i) + (sizeof(u32) * j);
+
+ addr |= (u64)DT_PROP_DATA_TO_U32(prop->data, offset) <<
+ ((addr_cells - j - 1) * 32);
+ }
+ for (j = 0; j < size_cells; ++j) {
+ int offset = (cellslen * i) +
+ (sizeof(u32) * (j + addr_cells));
+
+ size |= (u64)DT_PROP_DATA_TO_U32(prop->data, offset) <<
+ ((size_cells - j - 1) * 32);
+ }
+
+ if ((phys_addr_t)addr != addr) {
+ pr_err("phys_addr_t is smaller than provided address 0x%llx!\n",
+ addr);
+ return -1;
+ }
+
+ memc_idx = brcmstb_memory_phys_addr_to_memc((phys_addr_t)addr);
+ if (memc_idx == memc)
+ memc_size += size;
+ }
+
+ return memc_size;
+}
+EXPORT_SYMBOL_GPL(brcmstb_memory_memc_size);
+
diff --git a/include/soc/brcmstb/memory_api.h b/include/soc/brcmstb/memory_api.h
new file mode 100644
index 0000000..6546845
--- /dev/null
+++ b/include/soc/brcmstb/memory_api.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __MEMORY_API_H
+#define __MEMORY_API_H
+
+/*
+ * Bus Interface Unit control register setup, must happen early during boot,
+ * before SMP is brought up, called by machine entry point.
+ */
+void brcmstb_biuctrl_init(void);
+
+#ifdef CONFIG_SOC_BRCMSTB
+int brcmstb_memory_phys_addr_to_memc(phys_addr_t pa);
+u64 brcmstb_memory_memc_size(int memc);
+#else
+static inline int brcmstb_memory_phys_addr_to_memc(phys_addr_t pa)
+{
+ return -EINVAL;
+}
+
+static inline u64 brcmstb_memory_memc_size(int memc)
+{
+ return -1;
+}
+#endif
+
+#endif /* __MEMORY_API_H */
--
1.9.0.138.g2de3478
Powered by blists - more mailing lists