linux-kernel - Re: [PATCH v2 2/4] [media] ad5820: Add support for enable pin

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <CAPybu_1w+VWkOZDKSyEBHvcdGAF1wzoFDunUgDLTn7tqP8Dhbw@mail.gmail.com>
Date:   Thu, 20 Sep 2018 22:32:23 +0200
From:   Ricardo Ribalda Delgado <ricardo.ribalda@...il.com>
To:     Pavel Machek <pavel@....cz>
Cc:     Sakari Ailus <sakari.ailus@....fi>,
        Mauro Carvalho Chehab <mchehab@...nel.org>,
        linux-media <linux-media@...r.kernel.org>,
        LKML <linux-kernel@...r.kernel.org>,
        Hans Verkuil <hans.verkuil@...co.com>,
        Laurent Pinchart <laurent.pinchart@...asonboard.com>
Subject: Re: [PATCH v2 2/4] [media] ad5820: Add support for enable pin

Hi
On Thu, Sep 20, 2018 at 10:21 PM Pavel Machek <pavel@....cz> wrote:
>
> Hi!
>
> > > > > ad5820: dac@0c {
> > > > >    compatible = "adi,ad5820";
> > > > >    reg = <0x0c>;
> > > > >
> > > > >    VANA-supply = <&pm8994_l23>;
> > > > >    enable-gpios = <&msmgpio 26 GPIO_ACTIVE_HIGH>;
> > > > > };
> > > >
> > > > Well, I'm sure you could have gpio-based regulator powered from
> > > > pm8994_l23, and outputting to ad5820.
> > > >
> > > > Does ad5820 chip have a gpio input for enable?
> > >
> > > xshutdown pin:
> > > http://www.analog.com/media/en/technical-documentation/data-sheets/AD5821.pdf
> > >
> > > (AD5820,AD5821, and AD5823 are compatibles, or at least that is waht
> > > the module manufacturer says :)
> >
> > Aha, sorry for the noise.
> >
> > 2,3: Acked-by: Pavel Machek <pavel@....cz>
>
> And I forgot to mention. If ad5821 and ad5823 are compatible, it would
> be good to mention it somewhere where it is easy to find... That can
> save quite a bit of work to someone.
>

For the ad5821 I have the datasheet and I would not mind adding it
For the ad5823 I have no datasheet, just a schematic from a camera
module saying: you can replace ad5823 with ad5821.

I think I will add this as an extra patch

> Thanks,
>                                                                 Pavel
>
>
> --
> (english) http://www.livejournal.com/~pavelmachek
> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html



-- 
Ricardo Ribalda