[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180920224055.164856-1-ryandcase@chromium.org>
Date: Thu, 20 Sep 2018 15:40:54 -0700
From: Ryan Case <ryandcase@...omium.org>
To: Mark Brown <broonie@...nel.org>
Cc: Boris Brezillon <boris.brezillon@...tlin.com>,
Stephen Boyd <swboyd@...omium.org>,
Doug Anderson <dianders@...omium.org>,
linux-arm-msm@...r.kernel.org,
Girish Mahadevan <girishm@...eaurora.org>,
Ryan Case <ryandcase@...omium.org>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-spi@...r.kernel.org,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
Subject: [PATCH v2 1/2] dt-bindings: spi: Qualcomm Quad SPI(QSPI) documentation
From: Girish Mahadevan <girishm@...eaurora.org>
Bindings for Qualcomm Quad SPI used on SoCs such as sdm845.
Signed-off-by: Girish Mahadevan <girishm@...eaurora.org>
Signed-off-by: Ryan Case <ryandcase@...omium.org>
---
Changes in v2:
- Added commit text
- Removed invalid property
- Updated example to match sdm845 with attached spi-nor
.../bindings/spi/qcom,spi-qcom-qspi.txt | 36 +++++++++++++++++++
1 file changed, 36 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt
new file mode 100644
index 000000000000..ecfb1e2bd520
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt
@@ -0,0 +1,36 @@
+Qualcomm Quad Serial Peripheral Interface (QSPI)
+
+The QSPI controller allows SPI protocol communication in single, dual, or quad
+wire transmission modes for read/write access to slaves such as NOR flash.
+
+Required properties:
+- compatible: Should contain:
+ "qcom,sdm845-qspi"
+- reg: Should contain the base register location and length.
+- interrupts: Interrupt number used by the controller.
+- clocks: Should contain the core and AHB clock.
+- clock-names: Should be "core" for core clock and "iface" for AHB clock.
+
+SPI slave nodes must be children of the SPI master node and can contain
+properties described in Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+
+ qspi: qspi@...f000 {
+ compatible = "qcom,sdm845-qspi";
+ reg = <0x88df000 0x600>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "iface", "core";
+ clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+ <&gcc GCC_QSPI_CORE_CLK>;
+
+ device@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+ spi-tx-bus-width = <2>;
+ spi-rx-bus-width = <2>;
+ };
+ };
--
2.19.0.444.g18242da7ef-goog
Powered by blists - more mailing lists