[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180920111648.27000-3-lolivei@synopsys.com>
Date: Thu, 20 Sep 2018 13:16:40 +0200
From: Luis Oliveira <Luis.Oliveira@...opsys.com>
To: linux-media@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Joao.Pinto@...opsys.com, festevam@...il.com,
Luis Oliveira <Luis.Oliveira@...opsys.com>,
Luis Oliveira <luis.oliveira@...opsys.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Hans Verkuil <hans.verkuil@...co.com>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Laurent Pinchart <laurent.pinchart+renesas@...asonboard.com>,
Arnd Bergmann <arnd@...db.de>,
Jacob Chen <jacob-chen@...wrt.com>,
Neil Armstrong <narmstrong@...libre.com>,
Keiichi Watanabe <keiichiw@...omium.org>,
Kate Stewart <kstewart@...uxfoundation.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
Todor Tomov <todor.tomov@...aro.org>,
devicetree@...r.kernel.org
Subject: [V2, 2/5] Documentation: dt-bindings: Document the Synopsys MIPI DPHY Rx bindings
Add device-tree bindings documentation for SNPS DesignWare MIPI D-PHY in
RX mode.
Signed-off-by: Luis Oliveira <lolivei@...opsys.com>
---
Changelog
v2:
- no changes
.../devicetree/bindings/phy/snps,dphy-rx.txt | 36 ++++++++++++++++++++++
1 file changed, 36 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/snps,dphy-rx.txt
diff --git a/Documentation/devicetree/bindings/phy/snps,dphy-rx.txt b/Documentation/devicetree/bindings/phy/snps,dphy-rx.txt
new file mode 100644
index 0000000..9079f4a
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/snps,dphy-rx.txt
@@ -0,0 +1,36 @@
+Synopsys DesignWare MIPI Rx D-PHY block details
+
+Description
+-----------
+
+The Synopsys MIPI D-PHY controller supports MIPI-DPHY in receiver mode.
+Please refer to phy-bindings.txt for more information.
+
+Required properties:
+- compatible : Shall be "snps,dphy-rx".
+- #phy-cells : Must be 1.
+- snps,dphy-frequency : Output frequency of the D-PHY.
+- snps,dphy-te-len : Size of the communication interface (8 bits->8 or 12bits->12).
+- reg : Physical base address and size of the device memory mapped
+ registers;
+
+Optional properties:
+- snps,compat-mode : Compatibility mode control
+
+The per-board settings:
+- gpios : Synopsys testchip used as reference uses this to change setup
+ configurations.
+
+Example:
+
+ mipi_dphy_rx1: dphy@...0 {
+ compatible = "snps,dphy-rx";
+ #phy-cells = <1>;
+ snps,dphy-frequency = <300000>;
+ snps,dphy-te-len = <12>;
+ snps,compat-mode = <1>;
+ reg = < 0x03040 0x20
+ 0x08000 0x100
+ 0x09000 0x100>;
+ };
+
--
2.9.3
Powered by blists - more mailing lists