linux-kernel - Re: [PATCH] ARM: dts: sun8i: sun8i-h3-nanopi-m1-plus: enable HDMI output

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20180920124147.u2f72ygfch5my5sa@flea>
Date:   Thu, 20 Sep 2018 14:41:47 +0200
From:   Maxime Ripard <maxime.ripard@...tlin.com>
To:     Corentin Labbe <clabbe@...libre.com>
Cc:     mark.rutland@....com, robh+dt@...nel.org, wens@...e.org,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, linux-sunxi@...glegroups.com
Subject: Re: [PATCH] ARM: dts: sun8i: sun8i-h3-nanopi-m1-plus: enable HDMI
 output

Hi!

On Wed, Sep 19, 2018 at 08:14:11PM +0000, Corentin Labbe wrote:
> This patch enable HDMI output on sun8i-h3-nanopi-m1-plus.
> 
> Signed-off-by: Corentin Labbe <clabbe@...libre.com>
> ---
>  arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 26 ++++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> index 65cba1050802..88b5ff6b66b6 100644
> --- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> @@ -67,6 +67,21 @@
>  		pinctrl-names = "default";
>  		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
>  	};
> +
> +	connector {
> +		compatible = "hdmi-connector";
> +		type = "a";
> +
> +		port {
> +			hdmi_con_in: endpoint {
> +				remote-endpoint = <&hdmi_out_con>;
> +			};
> +		};
> +	};
> +};
> +
> +&de {
> +	status = "okay";
>  };
>  
>  &ehci1 {
> @@ -94,6 +109,17 @@
>  	};
>  };
>  
> +&hdmi {
> +	status = "okay";
> +};
> +
> +&hdmi_out {
> +	hdmi_out_con: endpoint {
> +		remote-endpoint = <&hdmi_con_in>;
> +	};
> +	status = "okay";

you don't need that status property here

Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)