[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180920175826.1284-7-linux.amoon@gmail.com>
Date: Thu, 20 Sep 2018 17:58:25 +0000
From: Anand Moon <linux.amoon@...il.com>
To: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Kukjin Kim <kgene@...nel.org>,
Krzysztof Kozlowski <krzk@...nel.org>,
Marek Szyprowski <m.szyprowski@...sung.com>,
Jaehoon Chung <jh80.chung@...sung.com>,
Ulf Hansson <ulf.hansson@...aro.org>
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-mmc@...r.kernel.org
Subject: [PATCHv3 6/7] ARM: dts: exynos5422: update maximum frequency for emmc to 200MHz
set the max-frequency to 200MHz for optimal performace of eMMC.
Signed-off-by: Anand Moon <linux.amoon@...il.com>
---
This patch is new to this series.
MMC
root@...oid:~# sudo cat /sys/kernel/debug/mmc0/ios
clock: 200000000 Hz
actual clock: 200000000 Hz
vdd: 7 (1.65 - 1.95 V)
bus mode: 2 (push-pull)
chip select: 0 (don't care)
power mode: 2 (on)
bus width: 3 (8 bits)
timing spec: 10 (mmc HS400)
signal voltage: 1 (1.80 V)
driver type: 0 (driver type B)
---
arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 96e281c0a118..5748f840becc 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -386,6 +386,7 @@
cap-mmc-highspeed;
mmc-hs200-1_8v;
mmc-hs400-1_8v;
+ max-frequency = <200000000>;
vmmc-supply = <&ldo18_reg>;
vqmmc-supply = <&ldo3_reg>;
};
--
2.17.1
Powered by blists - more mailing lists