linux-kernel - [PATCH 0/9] AHCI and SATA PHY support for BCM63138

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 20 Sep 2018 12:16:34 -0700
From:   Florian Fainelli <f.fainelli@...il.com>
To:     linux-kernel@...r.kernel.org
Cc:     Florian Fainelli <f.fainelli@...il.com>,
        Jens Axboe <axboe@...nel.dk>, Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Kishon Vijay Abraham I <kishon@...com>,
        Al Cooper <alcooperx@...il.com>,
        Ray Jui <ray.jui@...adcom.com>, Tejun Heo <tj@...nel.org>,
        Fengguang Wu <fengguang.wu@...el.com>,
        Arnd Bergmann <arnd@...db.de>,
        linux-ide@...r.kernel.org (open list:LIBATA SUBSYSTEM (Serial and
        Parallel ATA drivers)),
        devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
        DEVICE TREE BINDINGS), bcm-kernel-feedback-list@...adcom.com
Subject: [PATCH 0/9] AHCI and SATA PHY support for BCM63138

Hi Kishon, Tejun,

This patch series adds support for the SATA AHCI and PHY found on the
ARM-basd BCM63138 DSL SoCs.

It would probably make sense for patches 1-3 to go through Kishon's
tree, patches 4-7 through Tejun's tree, and I would be merging the last
two patches through the Broadcom ARM-SoC tree.

Let me know if this is not a workable plan, thank you very much!

Florian Fainelli (9):
  dt-bindings: phy: Document BCM63138 compatible string
  phy: brcm-sata: allow PHY_BRCM_SATA driver to be built for DSL SoCs
  phy: brcm-sata: Add BCM63138 (DSL) PHY init sequence
  dt-bindings: ata: Document BCM63138 compatible string
  ata: ahci_brcm: Allow optional reset controller to be used
  ata: ahci_brcm: Match BCM63138 compatible strings
  ata: ahci_brcm: Allow using driver or DSL SoCs
  ARM: dts: BCM63xx: enable SATA PHY and AHCI controller
  ARM: bcm63138: Enable SATA AHCI and PHY

 .../bindings/ata/brcm,sata-brcm.txt           |  1 +
 .../devicetree/bindings/phy/brcm-sata-phy.txt |  1 +
 arch/arm/boot/dts/bcm63138.dtsi               | 30 ++++++++
 arch/arm/boot/dts/bcm963138dvt.dts            |  8 +++
 drivers/ata/Kconfig                           |  3 +-
 drivers/ata/ahci_brcm.c                       | 10 +++
 drivers/phy/broadcom/Kconfig                  |  3 +-
 drivers/phy/broadcom/phy-brcm-sata.c          | 70 +++++++++++++++++++
 8 files changed, 124 insertions(+), 2 deletions(-)

-- 
2.17.1