| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 21 Sep 2018 13:26:25 +0200
From: Janusz Krzysztofik <jmkrzyszt@...il.com>
To: Marek Szyprowski <m.szyprowski@...sung.com>
Cc: Linus Walleij <linus.walleij@...aro.org>,
Jonathan Corbet <corbet@....net>,
Miguel Ojeda Sandonis <miguel.ojeda.sandonis@...il.com>,
Peter Korsgaard <peter.korsgaard@...co.com>,
Peter Rosin <peda@...ntia.se>,
Ulf Hansson <ulf.hansson@...aro.org>,
Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Dominik Brodowski <linux@...inikbrodowski.net>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Kishon Vijay Abraham I <kishon@...com>,
Lars-Peter Clausen <lars@...afoo.de>,
Michael Hennerich <Michael.Hennerich@...log.com>,
Jonathan Cameron <jic23@...nel.org>,
Hartmut Knaack <knaack.h@....de>,
Peter Meerwald-Stadler <pmeerw@...erw.net>,
Jiri Slaby <jslaby@...e.com>, Willy Tarreau <w@....eu>,
Geert Uytterhoeven <geert@...ux-m68k.org>,
linux-doc@...r.kernel.org, linux-i2c@...r.kernel.org,
linux-mmc@...r.kernel.org, netdev@...r.kernel.org,
linux-iio@...r.kernel.org, devel@...verdev.osuosl.org,
linux-serial@...r.kernel.org, linux-gpio@...r.kernel.org,
linux-kernel@...r.kernel.org,
Sebastien Bourdelin <sebastien.bourdelin@...oirfairelinux.com>,
Lukas Wunner <lukas@...ner.de>,
Rojhalat Ibrahim <imr@...chenk.de>,
Russell King <rmk+kernel@...linux.org.uk>,
Tony Lindgren <tony@...mide.com>,
Yegor Yefremov <yegorslists@...glemail.com>,
Uwe Kleine-König
<u.kleine-koenig@...gutronix.de>,
Linux Samsung SOC <linux-samsung-soc@...r.kernel.org>,
Krzysztof Kozlowski <krzk@...nel.org>
Subject: Re: [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array
Hi Marek,
2018-09-21 12:51 GMT+02:00, Janusz Krzysztofik <jmkrzyszt@...il.com>:
> Hi Marek,
>
> 2018-09-21 10:18 GMT+02:00, Marek Szyprowski <m.szyprowski@...sung.com>:
>> Hi Janusz,
>>
>> On 2018-09-20 18:21, Janusz Krzysztofik wrote:
>>> On Thursday, September 20, 2018 5:48:22 PM CEST Janusz Krzysztofik
>>> wrote:
>>>> On Thursday, September 20, 2018 12:11:48 PM CEST Marek Szyprowski
>>>> wrote:
>>>>> On 2018-09-02 14:01, Janusz Krzysztofik wrote:
>>>>>> Certain GPIO descriptor arrays returned by gpio_get_array() may
>>>>>> contain
>>>>>> information on direct mapping of array members to pins of a single
>>>>>> GPIO
>>>>>> chip in hardware order. In such cases, bitmaps of values can be
>>>>>> passed
>>>>>> directly from/to the chip's .get/set_multiple() callbacks without
>>>>>> wasting time on iterations.
>>>>>>
>>>>>> Add respective code to gpiod_get/set_array_bitmap_complex()
>>>>>> functions.
>>>>>> Pins not applicable for fast path are processed as before, skipping
>>>>>> over the 'fast' ones.
>>>>>>
>>>>>> Cc: Jonathan Corbet <corbet@....net>
>>>>>> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@...il.com>
>>>>> I've just noticed that this patch landed in today's linux-next. Sadly
>>>>> it
>>>>> breaks booting of Exynos5250-based Samsung Snow Chromebook (ARM 32bit,
>>>>> device-tree source arch/arm/boot/dts/exynos5250-snow.dts).
>>>>>
>>>>> Booting hangs after detecting MMC cards. Reverting this patch fixes
>>>>> the
>>>>> boot. I will try later to add some debugs and investigate it further
>>>>> what
>>>>> really happens when booting hangs.
>>>> Hi Marek,
>>>>
>>>> Thanks for reporting. Could you please try the following fix?
>>> Hi again,
>>>
>>> I realized the patch was not correct, j, not i, should be updated in
>>> second
>>> hunk. Please try the following one.
>>>
>>> Thanks,
>>> Janusz
>>>
>>> >From a919c504850f6cb40e8e81267a3a37537f7c4fd4 Mon Sep 17 00:00:00 2001
>>> From: Janusz Krzysztofik <jmkrzyszt@...il.com>
>>> Date: Thu, 20 Sep 2018 17:37:21 +0200
>>> Subject: [PATCH] gpiolib: Fix bitmap index not updated
>>> While skipping fast path bits, bitmap index is not updated with next
>>> found zero bit position. Fix it.
>>>
>>> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@...il.com>
>>
>> This one also doesn't help. A quick compare of logs with this version and
>> a working system shows, that with your patch (and fix) there are no calls
>> to
>> gpx0-2 pin (which are a part of mmc pwrseq), what causes mmc failure. If
>> you need any more information (what kind of logs will help?), let me
>> know.
One more question. You said before that booting hanged after detecting MMC
cards. Without the fix, I could imagine it keeps iterating with index not
updated and simply never returns from gpiod_get/set_array_bitmap_complex().
Is the behaviour you observe the same with the fix applied?
Thanks,
Janusz
> There is a debug message on array_info content available at the end of
> gpiod_get_array(), could you please activate it and post the message so
> we can understand better what is going on?
>
> On the other hand, I've had a look your device-tree configuration and
> it looks like that specific setup won't benefit from the fast bitmap path.
> You have pin 2 at position 0 and pin 1 at position 1 of the array.
> Hence, the fast bitmap path covers only pin 1, and pin 2 is processed
> by the old path with apparently buggy code for skipping over fast pins.
>
> As a temporary workaround, you could try to revert the order of pins in
> your dts file (pin 1 at position 0, pin 2 at 1) and the mmc pwrseq code
> should work for you again by taking the original old path, not skipping
> over fast pins. Results of such check may also help us to better
> understand and resolve the issue.
>
> Thanks,
> Janusz
>
>>
>>> ---
>>> drivers/gpio/gpiolib.c | 7 ++++---
>>> 1 file changed, 4 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
>>> index a53d17745d21..369bdd358fcc 100644
>>> --- a/drivers/gpio/gpiolib.c
>>> +++ b/drivers/gpio/gpiolib.c
>>> @@ -2880,7 +2880,7 @@ int gpiod_get_array_value_complex(bool raw, bool
>>> can_sleep,
>>> __set_bit(hwgpio, mask);
>>>
>>> if (array_info)
>>> - find_next_zero_bit(array_info->get_mask,
>>> + i = find_next_zero_bit(array_info->get_mask,
>>> array_size, i);
>>> else
>>> i++;
>>> @@ -2905,7 +2905,8 @@ int gpiod_get_array_value_complex(bool raw, bool
>>> can_sleep,
>>> trace_gpio_value(desc_to_gpio(desc), 1, value);
>>>
>>> if (array_info)
>>> - find_next_zero_bit(array_info->get_mask, i, j);
>>> + j = find_next_zero_bit(array_info->get_mask, i,
>>> + j);
>>> else
>>> j++;
>>> }
>>> @@ -3192,7 +3193,7 @@ int gpiod_set_array_value_complex(bool raw, bool
>>> can_sleep,
>>> }
>>>
>>> if (array_info)
>>> - find_next_zero_bit(array_info->set_mask,
>>> + i = find_next_zero_bit(array_info->set_mask,
>>> array_size, i);
>>> else
>>> i++;
>>
>> Best regards
>> --
>> Marek Szyprowski, PhD
>> Samsung R&D Institute Poland
>>
>>
>
Powered by blists - more mailing lists