| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20180921113802.26475-1-Jampala.Srikanth@cavium.com>
Date: Fri, 21 Sep 2018 17:08:00 +0530
From: Srikanth Jampala <Jampala.Srikanth@...ium.com>
To: herbert@...dor.apana.org.au, davem@...emloft.net
Cc: linux-crypto@...r.kernel.org, linux-kernel@...r.kernel.org,
sgadam@...ium.com, Jampala.Srikanth@...ium.com
Subject: [PATCH cryptodev-2.6 1/3] crypto: cavium/nitrox - added support to identify the NITROX device partname.
Get the device partname based on it's capabilities like,
core frequency, number of cores and revision id.
Signed-off-by: Srikanth Jampala <Jampala.Srikanth@...ium.com>
---
drivers/crypto/cavium/nitrox/nitrox_csr.h | 111 +++++++++++++++++++++
drivers/crypto/cavium/nitrox/nitrox_dev.h | 17 +++-
drivers/crypto/cavium/nitrox/nitrox_hal.c | 57 +++++++++++
drivers/crypto/cavium/nitrox/nitrox_hal.h | 1 +
drivers/crypto/cavium/nitrox/nitrox_main.c | 20 ----
5 files changed, 184 insertions(+), 22 deletions(-)
diff --git a/drivers/crypto/cavium/nitrox/nitrox_csr.h b/drivers/crypto/cavium/nitrox/nitrox_csr.h
index 9dcb7fdbe0a7..1ad27b1a87c5 100644
--- a/drivers/crypto/cavium/nitrox/nitrox_csr.h
+++ b/drivers/crypto/cavium/nitrox/nitrox_csr.h
@@ -7,9 +7,16 @@
/* EMU clusters */
#define NR_CLUSTERS 4
+/* Maximum cores per cluster,
+ * varies based on partname
+ */
#define AE_CORES_PER_CLUSTER 20
#define SE_CORES_PER_CLUSTER 16
+#define AE_MAX_CORES (AE_CORES_PER_CLUSTER * NR_CLUSTERS)
+#define SE_MAX_CORES (SE_CORES_PER_CLUSTER * NR_CLUSTERS)
+#define ZIP_MAX_CORES 5
+
/* BIST registers */
#define EMU_BIST_STATUSX(_i) (0x1402700 + ((_i) * 0x40000))
#define UCD_BIST_STATUS 0x12C0070
@@ -111,6 +118,9 @@
#define LBC_ELM_VF65_128_INT 0x120C000
#define LBC_ELM_VF65_128_INT_ENA_W1S 0x120F000
+#define RST_BOOT 0x10C1600
+#define FUS_DAT1 0x10C1408
+
/* PEM registers */
#define PEM0_INT 0x1080428
@@ -1082,4 +1092,105 @@ union lbc_inval_status {
} s;
};
+/**
+ * struct rst_boot: RST Boot Register
+ * @jtcsrdis: when set, internal CSR access via JTAG TAP controller
+ * is disabled
+ * @jt_tst_mode: JTAG test mode
+ * @io_supply: I/O power supply setting based on IO_VDD_SELECT pin:
+ * 0x1 = 1.8V
+ * 0x2 = 2.5V
+ * 0x4 = 3.3V
+ * All other values are reserved
+ * @pnr_mul: clock multiplier
+ * @lboot: last boot cause mask, resets only with PLL_DC_OK
+ * @rboot: determines whether core 0 remains in reset after
+ * chip cold or warm or soft reset
+ * @rboot_pin: read only access to REMOTE_BOOT pin
+ */
+union rst_boot {
+ u64 value;
+ struct {
+#if (defined(__BIG_ENDIAN_BITFIELD))
+ u64 raz_63 : 1;
+ u64 jtcsrdis : 1;
+ u64 raz_59_61 : 3;
+ u64 jt_tst_mode : 1;
+ u64 raz_40_57 : 18;
+ u64 io_supply : 3;
+ u64 raz_30_36 : 7;
+ u64 pnr_mul : 6;
+ u64 raz_12_23 : 12;
+ u64 lboot : 10;
+ u64 rboot : 1;
+ u64 rboot_pin : 1;
+#else
+ u64 rboot_pin : 1;
+ u64 rboot : 1;
+ u64 lboot : 10;
+ u64 raz_12_23 : 12;
+ u64 pnr_mul : 6;
+ u64 raz_30_36 : 7;
+ u64 io_supply : 3;
+ u64 raz_40_57 : 18;
+ u64 jt_tst_mode : 1;
+ u64 raz_59_61 : 3;
+ u64 jtcsrdis : 1;
+ u64 raz_63 : 1;
+#endif
+ };
+};
+
+/**
+ * struct fus_dat1: Fuse Data 1 Register
+ * @pll_mul: main clock PLL multiplier hardware limit
+ * @pll_half_dis: main clock PLL control
+ * @efus_lck: efuse lockdown
+ * @zip_info: ZIP information
+ * @bar2_sz_conf: when zero, BAR2 size conforms to
+ * PCIe specification
+ * @efus_ign: efuse ignore
+ * @nozip: ZIP disable
+ * @pll_alt_matrix: select alternate PLL matrix
+ * @pll_bwadj_denom: select CLKF denominator for
+ * BWADJ value
+ * @chip_id: chip ID
+ */
+union fus_dat1 {
+ u64 value;
+ struct {
+#if (defined(__BIG_ENDIAN_BITFIELD))
+ u64 raz_57_63 : 7;
+ u64 pll_mul : 3;
+ u64 pll_half_dis : 1;
+ u64 raz_43_52 : 10;
+ u64 efus_lck : 3;
+ u64 raz_26_39 : 14;
+ u64 zip_info : 5;
+ u64 bar2_sz_conf : 1;
+ u64 efus_ign : 1;
+ u64 nozip : 1;
+ u64 raz_11_17 : 7;
+ u64 pll_alt_matrix : 1;
+ u64 pll_bwadj_denom : 2;
+ u64 chip_id : 8;
+#else
+ u64 chip_id : 8;
+ u64 pll_bwadj_denom : 2;
+ u64 pll_alt_matrix : 1;
+ u64 raz_11_17 : 7;
+ u64 nozip : 1;
+ u64 efus_ign : 1;
+ u64 bar2_sz_conf : 1;
+ u64 zip_info : 5;
+ u64 raz_26_39 : 14;
+ u64 efus_lck : 3;
+ u64 raz_43_52 : 10;
+ u64 pll_half_dis : 1;
+ u64 pll_mul : 3;
+ u64 raz_57_63 : 7;
+#endif
+ };
+};
+
#endif /* __NITROX_CSR_H */
diff --git a/drivers/crypto/cavium/nitrox/nitrox_dev.h b/drivers/crypto/cavium/nitrox/nitrox_dev.h
index 4f560cedd0aa..1059495ee541 100644
--- a/drivers/crypto/cavium/nitrox/nitrox_dev.h
+++ b/drivers/crypto/cavium/nitrox/nitrox_dev.h
@@ -5,6 +5,7 @@
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
+#include <linux/if.h>
#define VERSION_LEN 32
@@ -48,15 +49,27 @@ struct nitrox_cmdq {
dma_addr_t dma;
};
+/**
+ * struct nitrox_hw - NITROX hardware information
+ * @partname: partname ex: CNN55xxx-xxx
+ * @fw_name: firmware version
+ * @freq: NITROX frequency
+ * @vendor_id: vendor ID
+ * @device_id: device ID
+ * @revision_id: revision ID
+ * @se_cores: number of symmetric cores
+ * @ae_cores: number of asymmetric cores
+ * @zip_cores: number of zip cores
+ */
struct nitrox_hw {
- /* firmware version */
+ char partname[IFNAMSIZ * 2];
char fw_name[VERSION_LEN];
+ int freq;
u16 vendor_id;
u16 device_id;
u8 revision_id;
- /* CNN55XX cores */
u8 se_cores;
u8 ae_cores;
u8 zip_cores;
diff --git a/drivers/crypto/cavium/nitrox/nitrox_hal.c b/drivers/crypto/cavium/nitrox/nitrox_hal.c
index 2b256ba36dff..4627a1976176 100644
--- a/drivers/crypto/cavium/nitrox/nitrox_hal.c
+++ b/drivers/crypto/cavium/nitrox/nitrox_hal.c
@@ -4,6 +4,8 @@
#include "nitrox_dev.h"
#include "nitrox_csr.h"
+#define PLL_REF_CLK 50
+
/**
* emu_enable_cores - Enable EMU cluster cores.
* @ndev: N5 device
@@ -410,3 +412,58 @@ void config_nps_core_vfcfg_mode(struct nitrox_device *ndev, enum vf_mode mode)
nitrox_write_csr(ndev, NPS_CORE_GBL_VFCFG, vfcfg.value);
}
+
+void nitrox_get_hwinfo(struct nitrox_device *ndev)
+{
+ union emu_fuse_map emu_fuse;
+ union rst_boot rst_boot;
+ union fus_dat1 fus_dat1;
+ unsigned char name[IFNAMSIZ * 2] = {};
+ int i, dead_cores;
+ u64 offset;
+
+ /* get core frequency */
+ offset = RST_BOOT;
+ rst_boot.value = nitrox_read_csr(ndev, offset);
+ ndev->hw.freq = (rst_boot.pnr_mul + 3) * PLL_REF_CLK;
+
+ for (i = 0; i < NR_CLUSTERS; i++) {
+ offset = EMU_FUSE_MAPX(i);
+ emu_fuse.value = nitrox_read_csr(ndev, offset);
+ if (emu_fuse.s.valid) {
+ dead_cores = hweight32(emu_fuse.s.ae_fuse);
+ ndev->hw.ae_cores += AE_CORES_PER_CLUSTER - dead_cores;
+ dead_cores = hweight16(emu_fuse.s.se_fuse);
+ ndev->hw.se_cores += SE_CORES_PER_CLUSTER - dead_cores;
+ }
+ }
+ /* find zip hardware availability */
+ offset = FUS_DAT1;
+ fus_dat1.value = nitrox_read_csr(ndev, offset);
+ if (!fus_dat1.nozip) {
+ dead_cores = hweight8(fus_dat1.zip_info);
+ ndev->hw.zip_cores = ZIP_MAX_CORES - dead_cores;
+ }
+
+ /* determine the partname CNN55<cores>-<freq><pincount>-<rev>*/
+ if (ndev->hw.ae_cores == AE_MAX_CORES) {
+ switch (ndev->hw.se_cores) {
+ case SE_MAX_CORES:
+ i = snprintf(name, sizeof(name), "CNN5560");
+ break;
+ case 40:
+ i = snprintf(name, sizeof(name), "CNN5560s");
+ break;
+ }
+ } else if (ndev->hw.ae_cores == (AE_MAX_CORES / 2)) {
+ i = snprintf(name, sizeof(name), "CNN5530");
+ } else {
+ i = snprintf(name, sizeof(name), "CNN5560i");
+ }
+
+ snprintf(name + i, sizeof(name) - i, "-%3dBG676-1.%u",
+ ndev->hw.freq, ndev->hw.revision_id);
+
+ /* copy partname */
+ strncpy(ndev->hw.partname, name, sizeof(ndev->hw.partname));
+}
diff --git a/drivers/crypto/cavium/nitrox/nitrox_hal.h b/drivers/crypto/cavium/nitrox/nitrox_hal.h
index 3baef865b17c..489ee64c119e 100644
--- a/drivers/crypto/cavium/nitrox/nitrox_hal.h
+++ b/drivers/crypto/cavium/nitrox/nitrox_hal.h
@@ -18,5 +18,6 @@ void invalidate_lbc(struct nitrox_device *ndev);
void enable_pkt_input_ring(struct nitrox_device *ndev, int ring);
void enable_pkt_solicit_port(struct nitrox_device *ndev, int port);
void config_nps_core_vfcfg_mode(struct nitrox_device *ndev, enum vf_mode mode);
+void nitrox_get_hwinfo(struct nitrox_device *ndev);
#endif /* __NITROX_HAL_H */
diff --git a/drivers/crypto/cavium/nitrox/nitrox_main.c b/drivers/crypto/cavium/nitrox/nitrox_main.c
index 6d7a421bddb8..acce0f0b9c7a 100644
--- a/drivers/crypto/cavium/nitrox/nitrox_main.c
+++ b/drivers/crypto/cavium/nitrox/nitrox_main.c
@@ -291,26 +291,6 @@ static int nitrox_bist_check(struct nitrox_device *ndev)
return 0;
}
-static void nitrox_get_hwinfo(struct nitrox_device *ndev)
-{
- union emu_fuse_map emu_fuse;
- u64 offset;
- int i;
-
- for (i = 0; i < NR_CLUSTERS; i++) {
- u8 dead_cores;
-
- offset = EMU_FUSE_MAPX(i);
- emu_fuse.value = nitrox_read_csr(ndev, offset);
- if (emu_fuse.s.valid) {
- dead_cores = hweight32(emu_fuse.s.ae_fuse);
- ndev->hw.ae_cores += AE_CORES_PER_CLUSTER - dead_cores;
- dead_cores = hweight16(emu_fuse.s.se_fuse);
- ndev->hw.se_cores += SE_CORES_PER_CLUSTER - dead_cores;
- }
- }
-}
-
static int nitrox_pf_hw_init(struct nitrox_device *ndev)
{
int err;
--
2.17.1
Powered by blists - more mailing lists