linux-kernel - [PATCH bpf-next 8/9] selftests/bpf: extend the storage test to test per-cpu cgroup storage

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20180921171353.11050-8-guro@fb.com>
Date:   Fri, 21 Sep 2018 17:14:15 +0000
From:   Roman Gushchin <guro@...com>
To:     "netdev@...r.kernel.org" <netdev@...r.kernel.org>
CC:     "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        Kernel Team <Kernel-team@...com>, Roman Gushchin <guro@...com>,
        Daniel Borkmann <daniel@...earbox.net>,
        Alexei Starovoitov <ast@...nel.org>
Subject: [PATCH bpf-next 8/9] selftests/bpf: extend the storage test to test
 per-cpu cgroup storage

This test extends the cgroup storage test to use per-cpu flavor
of the cgroup storage as well.

The test initializes a per-cpu cgroup storage to some non-zero initial
value (1000), and then simple bumps a per-cpu counter each time
the shared counter is atomically incremented. Then it reads all
per-cpu areas from the userspace side, and checks that the sum
of values adds to the expected sum.

Expected output:
  $ ./test_cgroup_storage
  test_cgroup_storage:PASS

Signed-off-by: Roman Gushchin <guro@...com>
Cc: Daniel Borkmann <daniel@...earbox.net>
Cc: Alexei Starovoitov <ast@...nel.org>
---
 .../selftests/bpf/test_cgroup_storage.c       | 59 ++++++++++++++++++-
 1 file changed, 56 insertions(+), 3 deletions(-)

diff --git a/tools/testing/selftests/bpf/test_cgroup_storage.c b/tools/testing/selftests/bpf/test_cgroup_storage.c
index 4e196e3bfecf..3dfc3773c790 100644
--- a/tools/testing/selftests/bpf/test_cgroup_storage.c
+++ b/tools/testing/selftests/bpf/test_cgroup_storage.c
@@ -4,6 +4,7 @@
 #include <linux/filter.h>
 #include <stdio.h>
 #include <stdlib.h>
+#include <sys/sysinfo.h>
 
 #include "bpf_rlimit.h"
 #include "cgroup_helpers.h"
@@ -15,6 +16,14 @@ char bpf_log_buf[BPF_LOG_BUF_SIZE];
 int main(int argc, char **argv)
 {
 	struct bpf_insn prog[] = {
+		BPF_LD_MAP_FD(BPF_REG_1, 0), /* percpu map fd */
+		BPF_MOV64_IMM(BPF_REG_2, 0), /* flags, not used */
+		BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+			     BPF_FUNC_get_local_storage),
+		BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_0, 0),
+		BPF_ALU64_IMM(BPF_ADD, BPF_REG_3, 0x1),
+		BPF_STX_MEM(BPF_W, BPF_REG_0, BPF_REG_3, 0),
+
 		BPF_LD_MAP_FD(BPF_REG_1, 0), /* map fd */
 		BPF_MOV64_IMM(BPF_REG_2, 0), /* flags, not used */
 		BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
@@ -28,9 +37,18 @@ int main(int argc, char **argv)
 	};
 	size_t insns_cnt = sizeof(prog) / sizeof(struct bpf_insn);
 	int error = EXIT_FAILURE;
-	int map_fd, prog_fd, cgroup_fd;
+	int map_fd, percpu_map_fd, prog_fd, cgroup_fd;
 	struct bpf_cgroup_storage_key key;
 	unsigned long long value;
+	unsigned long long *percpu_value;
+	int cpu, nproc;
+
+	nproc = get_nprocs_conf();
+	percpu_value = malloc(sizeof(*percpu_value) * nproc);
+	if (!percpu_value) {
+		printf("Not enough memory for per-cpu area (%d cpus)\n", nproc);
+		goto err;
+	}
 
 	map_fd = bpf_create_map(BPF_MAP_TYPE_CGROUP_STORAGE, sizeof(key),
 				sizeof(value), 0, 0);
@@ -39,7 +57,15 @@ int main(int argc, char **argv)
 		goto out;
 	}
 
-	prog[0].imm = map_fd;
+	percpu_map_fd = bpf_create_map(BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE,
+				       sizeof(key), sizeof(value), 0, 0);
+	if (percpu_map_fd < 0) {
+		printf("Failed to create map: %s\n", strerror(errno));
+		goto out;
+	}
+
+	prog[0].imm = percpu_map_fd;
+	prog[7].imm = map_fd;
 	prog_fd = bpf_load_program(BPF_PROG_TYPE_CGROUP_SKB,
 				   prog, insns_cnt, "GPL", 0,
 				   bpf_log_buf, BPF_LOG_BUF_SIZE);
@@ -77,7 +103,15 @@ int main(int argc, char **argv)
 	}
 
 	if (bpf_map_lookup_elem(map_fd, &key, &value)) {
-		printf("Failed to lookup cgroup storage\n");
+		printf("Failed to lookup cgroup storage 0\n");
+		goto err;
+	}
+
+	for (cpu = 0; cpu < nproc; cpu++)
+		percpu_value[cpu] = 1000;
+
+	if (bpf_map_update_elem(percpu_map_fd, &key, percpu_value, 0)) {
+		printf("Failed to update the data in the cgroup storage\n");
 		goto err;
 	}
 
@@ -120,6 +154,25 @@ int main(int argc, char **argv)
 		goto err;
 	}
 
+	/* Check the final value of the counter in the percpu local storage */
+
+	for (cpu = 0; cpu < nproc; cpu++)
+		percpu_value[cpu] = 0;
+
+	if (bpf_map_lookup_elem(percpu_map_fd, &key, percpu_value)) {
+		printf("Failed to lookup the per-cpu cgroup storage\n");
+		goto err;
+	}
+
+	value = 0;
+	for (cpu = 0; cpu < nproc; cpu++)
+		value += percpu_value[cpu];
+
+	if (value != nproc * 1000 + 6) {
+		printf("Unexpected data in the per-cpu cgroup storage\n");
+		goto err;
+	}
+
 	error = 0;
 	printf("test_cgroup_storage:PASS\n");
 
-- 
2.17.1