lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180922145658.GA4443@himanshu-Vostro-3559>
Date:   Sat, 22 Sep 2018 20:26:58 +0530
From:   Himanshu Jha <himanshujha199640@...il.com>
To:     Jonathan Cameron <jic23@...nel.org>
Cc:     Song Qiang <songqiang1304521@...il.com>, knaack.h@....de,
        lars@...afoo.de, pmeerw@...erw.net, robh+dt@...nel.org,
        mark.rutland@....com, andriy.shevchenko@...ux.intel.com,
        matt.ranostay@...sulko.com, tglx@...utronix.de, ak@...klinger.de,
        linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org
Subject: Re: [PATCH v6 1/2] iio: proximity: Add driver support for ST's
 VL53L0X ToF ranging sensor.

On Sat, Sep 22, 2018 at 03:46:58PM +0100, Jonathan Cameron wrote:
> On Tue, 18 Sep 2018 16:24:21 +0800
> Song Qiang <songqiang1304521@...il.com> wrote:
> 
> > This driver was originally written by ST in 2016 as a misc input device
> > driver, and hasn't been maintained for a long time. I grabbed some code
> > from it's API and reformed it into an iio proximity device driver.
> > This version of driver uses i2c bus to talk to the sensor and
> > polling for measuring completes, so no irq line is needed.
> > It can be tested with reading from
> > /sys/bus/iio/devices/iio:deviceX/in_distance_input
> > 
> > Signed-off-by: Song Qiang <songqiang1304521@...il.com>
> There are a few bits and bobs in here, but as they are all minor and
> one at least was me giving you wrong advise, I've fixed it up.
> 
> Please check I haven't made a mess of it! 
> 
> Applied with changes to the togreg branch of iio.git and pushed out
> as testing (where it should be visible now) for the autobuilders to
> play with it.

The SPDX license identifier is inconsistent!

> +// SPDX-License-Identifier: GPL-2.0+

> +MODULE_LICENSE("GPL v2");

216         For 'GNU General Public License (GPL) version 2 only' use:
217           SPDX-License-Identifier: GPL-2.0
218         For 'GNU General Public License (GPL) version 2 or any later version' use:
219           SPDX-License-Identifier: GPL-2.0+


-- 
Himanshu Jha
Undergraduate Student
Department of Electronics & Communication
Guru Tegh Bahadur Institute of Technology

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ